APC3216SGC KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

z3.2X1.6mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU E RP:1203000985 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ 1/2 APC3216SGC SUPER BRIGHT GREEN (GaP) WATER CLEAR 4 15 120° Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA λD [1] Dominant Wavelength Super Bright Green 568 nm IF=20mA Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Parameter Super Bright Green Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.

SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU E RP:1203000985 Super Bright Green APC3216SGC

SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU E RP:1203000985 APC3216SGC Tape Specifications (Units : mm) Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1)

SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU E RP:1203000985 PACKING & LABEL SPECIFICATIONS APC3216SGC