APBA3210EYC-F01 KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

z LOW POWER CONSUMPTION. z 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm THICKNESS. z WIDE VIEWING ANGLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT.

Description

The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAF1092 REV NO: V.4 DATE: MAY/18/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003897 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 APBA3210EYC-F01 High Efficiency Red (GaAsP/GaP) WATER CLEAR 4 12 Yellow (GaAsP/GaP) 2.6 8 120° Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength High Efficiency Red Yellow 627 590 nm IF=20mA λD [1] Dominant Wavelength High Efficiency Red Yellow 625 588 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red Yellow 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2.1 2.5

2.5 V IF=20mA

IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C

SPEC NO: DSAF1092 REV NO: V.4 DATE: MAY/18/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003897 APBA3210EYC-F01 High Efficiency Red

SPEC NO: DSAF1092 REV NO: V.4 DATE: MAY/18/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003897 Yellow

SPEC NO: DSAF1092 REV NO: V.4 DATE: MAY/18/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003897 APBA3210EYC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm)

SPEC NO: DSAF1092 REV NO: V.4 DATE: MAY/18/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003897 PACKING & LABEL SPECIFICATIONS APBA3210EYC-F01