APA2106SURCK KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0 .1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. APA2106SURCK HYPER RED

Description

The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. 2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP

SPEC NO: DSAA5605 REV NO: V.7 DATE: JUN/28/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 APA2106SURCK HYPER RED (InGaAlP) WATER CLEAR 50 150 120 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 650 nm IF=20mA λD Dominant Wavelength Hyper Red 635 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating / storage Temperature -40°C To +85°C Absolute Maximum Ratings at T A =25 °C

SPEC NO: DSAA5605 REV NO: V.7 DATE: JUN/28/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533 Hyper Red APA2106SURCK

SPEC NO: DSAA5605 REV NO: V.7 DATE: JUN/28/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) APA2106SURCK Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.

SPEC NO: DSAA5605 REV NO: V.7 DATE: JUN/28/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000533 PACKING & LABEL SPECIFICATIONS APA2106SURCK