APA2106EC KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

z2.1mmX0.6mm RIGHT ANGLE SMT LED, 1.0mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 APA2106EC HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR 4 15 120° Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.

SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 High Efficiency Red APA2106EC

SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 APA2106EC Tape Specifications (Units : mm) Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1)

SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 PACKING & LABEL SPECIFICATIONS APA2106EC