AP7375Q

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 18

Technical content

Features

  • Wide Input Voltage Range: 3V to 45V
  • Maximum Output Current: 300mA
  • Low Dropout Voltage: ▪ VDROP = 35mV@IOUT = 10mA (typ) ▪ VDROP = 350mV@ IOUT = 100mA (typ)
  • Low Quiescent Current: 2.1μA (typ)
  • Fixed Output Voltages: 1.8V, 3.0V, 3.3V and 5.0V
  • High Output Voltage Accuracy: ±2%
  • High PSRR: 85dB@1kHz
  • Excellent Line/Load Regulation
  • Thermal Shutdown Function
  • Short-Current Protection Function
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3)
  • The AP7375Q is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. https://www.diodes.com/quality/product-definitions/ Pin Assignments (Top View) (Top View) SOT89 SO-8EP (Top View) (Top View) SOT25 SOT25 (Package Code: W5) (Package Code: WR) (Top View) U-DFN2020-6 (SWP) (Type UXC)

Applications

  • Powering MCUs and CAN/LIN transceivers
  • Automotive head units
  • EV and HEV battery management systems
  • Body control modules
  • Transmission control units (TCUs) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen - and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

3 VIN

Document number: DS44818 Rev. 7 - 2 2 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Applications Circuit VIN GND VOUT COUT 10μF VOUTVIN AP7375Q CIN 1μF EN (optional) ON OFF EN Pin Descriptions Pin Number Pin Name Function SOT89 SO-8EP SOT25 (Package Code: W5) SOT25 (Package Code: WR) U-DFN2020-6 (SWP) (Type UXC) 3 8 1 1 1 VIN Input voltage 2 5 2 2, 3, 4 3, 4 GND Ground — 7 3 — 2 EN Enable 1 1 5 5 6 VOUT Regulated output voltage — 2, 3, 4, 6 4 — 5 NC Not connected internally, recommend connect to GND to maximize PCB copper for thermal dissipation. — EP — — EP Expose Pad In PCB layout, prefer to use large copper area to cover this pad for better thermal dissipation, then connect this area to GND or leave it open. However, do not use it as GND electrode function alone

Document number: DS44818 Rev. 7 - 2 3 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Functional Block Diagram Absolute Maximum Ratings (Note 4) Symbol Parameter Rating Unit VIN Supply Input Voltage -0.3 to 55 V VOUT Regulated Output Voltage -0.3 to 6 V VEN EN to GND -0.3 to 55 V IOUT Output Current Internally limited mA TLEAD Lead Temperature (Soldering, 10sec) +260 °C TJ Operating Junction Temperature +150 °C TA Operating Ambient Temperature -40 to +125 °C θJA Thermal Resistance (Junction to Ambient) SOT89 94.5 °C/W SO-8EP 47.7 SOT25 135.5 U-DFN2020-6 (SWP) (Type UXC) 99.5 TSTG Storage Temperature Range -40 to +150 °C CDM ESD (Charge Device Model) ±1.5 kV HBM ESD (Human Body Model) 3 kV Note: 4. a). Stresses greater than those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods can affect device reliability. b). Ratings apply to ambient temperature at +25°C. The JEDEC STD.51 High-K board design used to derive this data was a 3 inch x 3 inch multilayer board with 1oz. internal power and ground planes and 2oz. copper traces on the top and bottom of the board.

Document number: DS44818 Rev. 7 - 2 4 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Recommended Operating Conditions Symbol Parameter Min Typ Max Unit VIN Supply Input Voltage 3.0 — 45 V VOUT Output Voltage — — 5 V TJ Operating Junction Temperature -40 — +125 °C CIN Input Capacitor — 1 — µF COUT Output Capacitor 1 10 — µF Electrical Characteristics (TA = -40°C to +125°C, IOUT = 1mA, CIN = 1µF, COUT = 10µF ceramic capacitor, VIN = VOUTNOM +2.0V) Symbol Parameter Test Conditions Min Typ Max Unit VIN Input Voltage — 3 — 45 V IGND Quiescent Current VIN = 12V, No load — 2.1 8 µA VOUT Output Voltage VIN = 12V, IOUT = 10mA VOUT x 98% — VOUT x 102% V IOUT_MAX Output Current — 300 350 — mA VDROP Dropout Voltage (Note 5) IOUT = 10mA, VIN = VOUTNOM – 0.1V — 35 80 mV IOUT = 100mA, VIN = VOUTNOM – 0.1V — 350 580 mV IOUT = 300mA, VIN = VOUTNOM – 0.1V TA = +25°C — 1200 1400 mV △VOUT(△IOUT) Load Regulation (Note 6) VIN = 12V, 1mA ≤ IOUT ≤ 100mA — 0.02 0.025 %/mA △VOUT(∆VIN) Line Regulation VOUTNOM + 2V ≤ VIN ≤ 45V IOUT = 1mA — 0.01 0.02 %/V ILIMIT Current Limit — — 500 — mA TOTSD Thermal Shutdown Temperature — — +150 — °C THYOTSD Thermal Shutdown Hysteresis — — +10 — °C PSRR Power Supply Rejection Ratio VIN = 12V, IOUT = 10mA VOUT = 3.3V@1kHz — 85 — dB Vn Output Noise Voltage BW = 10Hz to 100kHz, IOUT = 30mA — 120 — µVrms VENH EN High Level Enabled 1 — — V VENL EN Low Level Disabled — — 0.4 V JC Thermal Resistance Junction to Case (Note 4) SOT89 — 43.7 — °C/W SO-8EP — 17.4 — SOT25 — 36.7 — U-DFN2020-6 (SWP) (Type UXC) — 15.8 — Notes: 4. a). Stresses greater than those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods can affect device reliability. b). Ratings apply to ambient temperature at +25°C. The JEDEC STD.51 High-K board design used to derive this data was a 3 inch x 3 inch multilayer board with 1oz. internal power and ground planes and 2oz. copper traces on the top and bottom of the board. 5. Dropout voltage is the voltage difference between the input and output at which the output voltage drops 100mV below its nominal value. This parameter only applies to output voltages above 3.0V since minimum VIN = 3.0V. 6. The AP7375Q internal circuitry is not fully operation al until VIN is at least the greater of 3V or (VOUT + VDROPOUT(MAX)).

Document number: DS44818 Rev. 7 - 2 5 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Performance Characteristics Quiescent Current(µA) Quiescent Current(µA) Quiescent Current(µA) Quiescent Current(µA)

Document number: DS44818 Rev. 7 - 2 6 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Characteristics IOUT=0A IOUT=0A IOUT=1mA IOUT=1mA

Document number: DS44818 Rev. 7 - 2 7 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Characteristics (continued)

Document number: DS44818 Rev. 7 - 2 8 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Characteristics (continued) Power On Power On VOUT=3.3V VOUT=5V VIN=12V(5V/div) VOUT=3.3V(1V/div) IOUT=300mA(200mA/div) VIN=12V(5V/div) VOUT=5V(2V/div) IOUT=300mA(200mA/div) Time(1ms/div) Time(1ms/div) Resistor load Resistor load

Document number: DS44818 Rev. 7 - 2 9 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Characteristics (continued) Power Off Power Off VOUT=3.3V VOUT=5V Line Transient Response Line Transient Response VOUT=3.3V VOUT=5V Load Transient Response Load Transient Response VOUT=3.3V VOUT=3.3V VIN=12V(5V/div) VOUT=3.3V(1V/div) IOUT=300mA(200mA/div) Time(1ms/div) Time(1ms/div) VIN=12V(5V/div) VOUT=5V(2V/div) IOUT=300mA(200mA/div) VIN(DC)=4.3 to 12V(5V/div) tR=tF=5µs VOUT(AC):(10mV/div) Time:200µs/div VIN(DC)=6 to 12V(5V/div) tR=tF=5µs VOUT(AC):(10mV/div) Time:200µs/div VOUT(AC):(50mV/div) IOUT(DC)=10 to 100mA(100mA/div) tR=tF=5µs Time:200µs/div VOUT(AC):(100mV/div) IOUT(DC)=10 to 300mA(100mA/div) tR=tF=5µs Time:200µs/div IOUT= 10mA IOUT= 10mA VIN= 12V VIN= 12V VIN= 12V

Document number: DS44818 Rev. 7 - 2 10 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Typical Characteristics (continued) Load Transient Response Load Transient Response VOUT=5V VOUT=5V

Application Information

An output capacitor is required for the stability of the LDO. The recommended minimum output capacitance is 1μF . A ceramic capacitor is recommended, and temperature characteristics are X7R or X5R. Higher capacitance values help to improve load/line transient response. The output capacitance may be increased to keep low undershoot/overshoot. Place the output capacitor as close as possible to VOUT and GND pins. Input Capacitor A 1μF ceramic capacitor is recommended to connect between VIN and GND pins to decouple input power supply glitch and noise. The amount of the capacitance may be increased with out limit. This input capacitor must be located as close as possible to the device to ensure input stability and less noise. For PCB layout, a wide copper trace is required for both VIN and GND. Current-Limit and Short-Circuit Protection When output current at VOUT pin is higher than the current-limit threshold or the VOUT pin direct ly shorts to GND, current-limit protection will be triggered and clamp the output current at a pre-designed level to prevent overcurrent and thermal damage. Thermal Protection The AP7375Q has internal thermal sense and protection circuits. When excessive power dissipation happens on the device, such as short circuit at the output pin or very heavy load current with a large voltage drop across the device, the internal thermal protection circuit will be triggered, shutting down the power MOSFET to prevent the LDO from damage. As soon as the excessive thermal condition is removed and the temperature of the device drops down, the thermal protection circuit will release the control of the power MOSFET, and the LDO device returns to normal operation. Layout Considerations For good ground loop and stability, the input and output capacitors should be located close to the input, output, and ground pins of the device. The regulator ground pin should be connected to the external circuit ground to reduce voltage drop caused by trace impedance. Gro und plane is generally used to reduce trace impedance. Wide trace should be used for large current paths from VIN to VOUT, and load circuit. VOUT(AC):(50mV/div) IOUT(DC)=10 to 100mA(100mA/div) tR=tF=5µs Time:200µs/div VOUT(AC):(100mV/div) IOUT(DC)=10 to 300mA(100mA/div) tR=tF=5µs Time:200µs/div VIN= 12V

Document number: DS44818 Rev. 7 - 2 11 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q

Ordering Information

7/13: Tape & Reel Output Voltage 18 : 1.8V 30 : 3.0V 33 : 3.3V 50 : 5.0V Package Y : SOT89 SP: SO-8EP W5: SOT25 WR: SOT25 FDCW: U-DFN2020-6 (SWP) (Type UXC) Orderable Part Number Part Number Suffix Package Code Package Packing Qty. Carrier AP7375Q-XXY-13 -13 Y SOT89 2,500 13” Tape & Reel AP7375Q-XXSP-13 -13 SP SO-8EP 2,500 13” Tape & Reel AP7375Q-XXW5-7 -7 W5 SOT25 3,000 7” Tape & Reel AP7375Q-XXWR-7 -7 WR SOT25 3,000 7” Tape & Reel AP7375Q-XXFDCW-7 -7 FDCW U-DFN2020-6 (SWP) (Type UXC) 3,000 7” Tape & Reel Marking Information (1) SOT89 1 32 XXXX Y W X XXXX : Identification Code ( Top View ) Y : Year : 0 to 9 (ex: 4 = 2024) W : Week : A to Z : week 1 to 26; X : Internal Code a to z : week 27 to 52; z represents week 52 and 53 Orderable Part Number Package Identification Code AP7375Q-18Y-13 SOT89 H5AQ AP7375Q-30Y-13 SOT89 H5BQ AP7375Q-33Y-13 SOT89 H5CQ AP7375Q-50Y-13 SOT89 H5DQ

Document number: DS44818 Rev. 7 - 2 12 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Marking Information (continued) (2) SO-8EP 7375-XXQ (Top View) YY WW X X E Logo WW : Week : 01 to 52; 52 YY : Year (ex: 24 = 2024) X X : Internal Code 8 7 6 5 1 2 3 4 represents week 52 and 53 E : SO-8EP Identification Code 7375-18Q : 1.8V 7375-30Q : 3.0V 7375-33Q : 3.3V 7375-50Q : 5.0V Orderable Part Number Package Identification Code AP7375Q-18SP-13 SO-8EP 7375-18Q AP7375Q-30SP-13 SO-8EP 7375-30Q AP7375Q-33SP-13 SO-8EP 7375-33Q AP7375Q-50SP-13 SO-8EP 7375-50Q (3) SOT25 1 2 3 (Top View) XXXX : Identification Code W : Week : A to Z : week 1 to 26; X : Internal Code Y : Year 0 to 9 (ex: 4 = 2024) a to z : week 27 to 52; z represents week 52 and 53 XXXX Y W X Orderable Part Number Package Identification Code AP7375Q-18W5-7 SOT25 H5EQ AP7375Q-30W5-7 SOT25 H5FQ AP7375Q-33W5-7 SOT25 H5GQ AP7375Q-50W5-7 SOT25 H5HQ AP7375Q-18WR-7 SOT25 H5AQ AP7375Q-30WR-7 SOT25 H5BQ AP7375Q-33WR-7 SOT25 H5CQ AP7375Q-50WR-7 SOT25 H5DQ

Document number: DS44818 Rev. 7 - 2 13 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Marking Information (continued) (4) U-DFN2020-6 (SWP) (Type UXC) (Top View) XXXX Y : Year : 0 to 9 (ex: 4 = 2024) X : Internal Code XXXX : Identification Code W : Week : A to Z : week 1 to 26; a to z : week 27 to 52; z represents week 52 and 53 Y W X Orderable Part Number Package Identification Code AP7375Q-18FDCW-7 U-DFN2020-6 (SWP) (Type UXC) H5EQ AP7375Q-30FDCW-7 U-DFN2020-6 (SWP) (Type UXC) H5FQ AP7375Q-33FDCW-7 U-DFN2020-6 (SWP) (Type UXC) H5GQ AP7375Q-50FDCW-7 U-DFN2020-6 (SWP) (Type UXC) H5HQ

Document number: DS44818 Rev. 7 - 2 14 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. (1) SOT89 E H B e c L A D 8° ( 4X) R0.200 z TOP VIEW BOTTOM VIEW SOT89 Dim Min Max Typ A 1.40 1.60 1.50 B 0.50 0.62 0.56 B1 0.42 0.54 0.48 c 0.35 0.43 0.38 D 4.40 4.60 4.50 D1 1.62 1.83 1.733 D2 1.61 1.81 1.71 E 2.40 2.60 2.50 E2 2.05 2.35 2.20 e - - 1.50 H 3.95 4.25 4.10 H1 2.63 2.93 2.78 L 0.90 1.20 1.05 L1 0.327 0.527 0.427 z 0.20 0.40 0.30 All Dimensions in mm (2) SO-8EP b e E1A 9° ( All side) 4°±3° C Q N 45° R 0.1 D E L Seating Plane Gauge Plane F H EXPOSED PAD SO-8EP Dim Min Max Typ A 1.40 1.50 1.45 A1 0.00 0.13 - b 0.30 0.50 0.40 C 0.15 0.25 0.20 D 4.85 4.95 4.90 E 3.80 3.90 3.85 E0 3.85 3.95 3.90 E1 5.90 6.10 6.00 e - - 1.27 F 2.75 3.35 3.05 H 2.11 2.71 2.41 L 0.62 0.82 0.72 N - - 0.35 Q 0.60 0.70 0.65 All Dimensions in mm

Document number: DS44818 Rev. 7 - 2 15 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Package Outline Dimensions (continued) Please see http://www.diodes.com/package-outlines.html for the latest version. (3) SOT25 SOT25 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D - - 0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 N 0.70 0.80 0.75  0° 8° - All Dimensions in mm (4) U-DFN2020-6 (SWP) (Type UXC) A A1 A3 6X- 0.08 C ccc C C Seating Plane aaa B E 2X- b ( Pin #1 ID) e bbb C A B L DB aaa A 2X- Az R0.150 U-DFN2020-6 (SWP) (Type UXC) Dim Min Max Typ A 0.57 0.63 0.60 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.25 0.35 0.30 D 1.95 2.075 2.00 D2 1.55 1.75 1.65 E 1.95 2.075 2.00 E2 0.86 1.06 0.96 e –– –– 0.65 L 0.25 0.35 0.30 z –– –– 0.20 aaa 0.25 bbb 0.10 ccc 0.10 All Dimensions in mm A M J LD B C H K N

Document number: DS44818 Rev. 7 - 2 16 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. (1) SOT89 X Y Y2 G C Dimensions Value (in mm) C 1.500 G 0.244 X 0.580 X1 0.760 X2 1.933 Y 1.730 Y1 3.030 Y2 1.500 Y3 0.770 Y4 4.530 (2) SO-8EP (3) SOT25 Dimensions Value (in mm) Z 3.20 G 1.60 X 0.55 Y 0.80 C1 2.40 C2 0.95 Dimensions Value (in mm) C 1.270 X 0.802 X1 3.502 X2 4.612 Y 1.505 Y1 2.613 Y2 6.500 C X Y X Z Y C2C2 G

Document number: DS44818 Rev. 7 - 2 17 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q Suggested Pad Layout (continued) Please see http://www.diodes.com/package-outlines.html for the latest version. (4) U-DFN2020-6 (SWP) (Type UXC) CX Y Y1Y2 Dimensions Value (in mm) C 0.650 X 0.350 X1 1.650 X2 1.700 Y 0.525 Y1 1.010 Y2 2.400 Mechanical Data

  • Moisture Sensitivity: Level 1 Per J-STD-020
  • Terminals: ▪ SOT89/ SO-8EP/ SOT25: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 ▪ U-DFN2020-6 (SWP) (Type UXC): Finish – NiPdAu over Copper Leads, Solderable per MIL-STD-202, Method 208
  • Weight: ▪ SOT89: 0.054 grams (Approximate) ▪ SO-8EP: 0.075 grams (Approximate) ▪ SOT25: 0.018 grams (Approximate) ▪ U-DFN2020-6 (SWP) (Type UXC): 0.007 grams (Approximate)

Document number: DS44818 Rev. 7 - 2 18 of 18 www.diodes.com September 2024 © 2024 Copyright Diodes Incorporated. All Rights Reserved. AP7375Q IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes ’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who d esign with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality co ntrol techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associ ated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities a ssociated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against al l damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or fore ign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in r espect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any da mages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives a nd agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this docume nt is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any produ ct described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising f rom any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and- conditions/important-notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2024 Diodes Incorporated. All Rights Reserved. www.diodes.com