ANT-418-PW-QW ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Ordering Information
Designed for permanent attachment, PW Series 1/4- wave whips give outstanding performance in a rugged and cost-effective package. The antenna is attached by placing its base through a 1/4” hole in the product and securing it with a nut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves the cost of an antenna connector. The antenna is fed through the base with RG-174 coax cable, which may be soldered directly to the board or attached using a 50- ohm connector. Standard cable length is 8.5”. Custom lengths and terminations are available by special order. 7.01” (178.0) 0.24” (6.0) 0.51” (13.0) 2.05” (52.0) 0.18” (4.5) 0.31” (7.8) End View 0.57” (14.5) * Requires proximity ground plane Electrical specifications and plots measured on 4.00” x 4.00” reference ground plane 0.25”
28 TPI
CENTER 418.000MHz SPAN 200.000MHz S11 SWR 1.158 Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) VSWR Graph
- Low cost
- Outstanding performance
- Omni-directional pattern
- Wide bandwidth
- Flexible main shaft
- Rugged & weatherized
- Integral 8½-inch RG-174 coax cable
- Use with plastic* or metal enclosures
- Center Freq. 418MHz
- Bandwidth 80MHz
- Wavelength 1/4-wave
- VSWR <1.9 typ. at center
- Impedance 50 ohms
- Connection Case-mount
- Cable 8½-inch RG-174 coax
- ANT-418-PW-QW