Download PDFANG ZFSWITCHES
Document overview
- PDF pages: 2
Technical content
Page 1
Angle Position Sensors
ANG Sensors
Thin, programmable, non-contact magnetic position sensors
capable of continuous rotation, with dual outputs available.
Description
The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft.
Actuator magnet part number AS500106 is required to assure proper operation (ordered separately).
Features
Angular position sensor with high tolerance for misalignment
Non-contact angular position sensing and full 360O rotation
Custom programming available for: angle range, slope, PWM
output – contact factory
No mechanical interface means no parts to wear out or jam
Comes with 20 AWG 305 mm (12”) discrete wire leads
RoHS Compliant
IP68\*
Maximum air gap of 6 mm (0.24”)
Compliant to industrial/automotive EMC/EMI/ESD directives
Environmental Specifications
Operating Temperature
-40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F)
Ingress Protection
IP68\*
\*\*Contact ZF for details on testing conditions
Electrical Specifications
Input Supply Voltage
Maximum Overvoltage
5.0 VDC ± 10%
16 VDC
Output Signal
0.5 – 4.5 VDC (with 5 VDC input)
Input Current
Single output Dual output
Resolution
12 bit
Typical Applications
Hydraulic valves Hydraulic controls Electric drives Pneumatic controls Zero-contact encoder alternative Gear selection / shifting position Lifting / ride height position Throttle / pedal position Steering wheel position
Reverse Battery Protection 12 VDC
8 mA typ., 10 mA max. 16 mA typ., 20 mA max.
Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale
Accuracy, overall
Programmed angle sensing range: 65⁰ < 360⁰ : ± 2.0% Full scale Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale
Output Linearity
Programmed angle sensing range: 65⁰ < 360⁰ : ± 1.0% Full scale
Mechanical Specifications
Measuring Range
0⁰ to 360⁰, customizable (see graph) 1 mm to 6 mm (application dependent); 2.5 mm typ.
Air Gap Eccentricity
± 2 mm (0.08”)
www.cherryswitches.com
Last update 2016-07-12; specifications subject to change without notice.
Page 1 of 2
Page 2
Products Part Number
Output
Interface 20 AWG x 305 mm (12") discrete wires
ANG-11HAW1
Analog single
20 AWG x 305 mm (12") discrete wires
ANG-21HAW1
Analog dual
Typical Output vs. Angular Rotation (as percentage of input)
Dimensions mm (inches)
www.cherryswitches.com
Last update 2016-07-12; specifications subject to change without notice.
Page 2 of 2