AND671GST ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • AND671GST: Super Twist Technology
  • AND671GST -LED: STN with LED backlight
  • Low voltage, +5V single power supply
  • Controller on board (HD44780)
  • Direct interface to 4- or 8-bit CPU
  • 11 commands for control
  • Wide temperature range option (WGST) Dot Matrix Dimensions Mechanical Characteristics Item Specification Unit Outline Dimensions 80 (W) x 36 (H) x 11 (D) mm Character Size 3.07 (W) x 6.56 (H) mm Viewing Area 64.5 (W) x 13.8 (H) mm Dot Size 0.55 (W) x 0.75 (H) mm Dot Pitch 0.63 (W) x 0.83 (H) mm Absolute Maximum Ratings Item Symbol Rating Unit Supply Voltage V DD 7.0 V Input Voltage V IN V IN V DD V LED Forward Current I F 200 mA 3.07 0.70 0.05 0.65 0.05 0.65 6.560.40 LED Reverse Voltage V R LED Power Dissipation P D 800 mW Operating Temperature T op 0 to +50 °C Storage Temperature T stg –20 to +60 °C Electrical Characteristics (TA = 25°C) Item Symbol Min. Typ. Max. Unit Supply Voltage V DD 4.75 5.0 5.25 V V DD O 3.0 – 6.3 High Level In Voltage DD = 5.0V) V IH 2.2 – – V Low Level In Voltage OH = 0.2 mA) V IL 0 – 0.6 V High Level Output Volt. (–I OH = 0.2 mA) V OH 2.4 – – V Low Level Output Volt. OL = 1.2 mA) V OL – – 0.4 V LED Forward Voltage F = 150 mA) V F 3.8 4.1 4.4 V LED Reverse Current R = 8 V) I R – – 1.0 mA Optical Characteristics (TA = 25˚C, f = 0°, q = 0°) Item Symbol Min. Typ. Max. Unit Viewing Angle f – 50 – degree Contrast K – 6.0 – – Turn On T on – 200 400 ms Turn Off T off – 250 400 ms Absolute Maximum Ratings (Continued) Item Symbol Rating Unit

Intelligent Character Display AND671GST/GST-LED Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086 6/19/98 2-5 Power Supply The LCD panel is driven by the voltage V DD O , so an adjustable V O is required for contrast control and temperature compensation. Power Supply Block Diagram Block Diagram Dimensional Outline Connector Pin Assignment Pin No. Signal Function

1 GND Ground

+5 Power Supply 3 V O LCD Drive Voltage 4R S “H” Data Input “L” Command Input

5 R/W Read/Write

6 E Enable

7 DBO

DB0-DB7 are for 8-bit operation DB4-DB7 are for 4-bit operation

8 DB1

9 DB2

10 DB3

11 DB4

12 DB5

13 DB6

14 DB7

V DD O 0°C 5.00 +25°C 4.75 +50°C 4..50 VDD VO GND VDD – VO VDD – VO = LCD Drive Voltage VR10 to 20 kΩ VR VDD (+5V) Controller/ Driver E R/W RS VDD VO GND DB0-DB7 8 LCD