Download PDFAN8 ZFSWITCHES
Document overview
- PDF pages: 2
Technical content
Page 1
Angle Position Sensors
AN8 Sensors
Programmable, non-contact magnetic position sensors capable of continuous rotation
Description
The AN8 Series sensors are non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft.
Features
Angular position sensor with high tolerance for misalignment
Non-contact angular position sensing and full 360° rotation
Custom programming available for: angle range, slope, PWM
output, custom magnets – contact factory No mechanical interface means no parts to wear out or jam
Available with Delphi connector or 12” (305 mm) wire leads
RoHS compliant
IP67 Maximum air gap of 5.5 mm (0.22”)\*
Environmental Specifications
Typical Applications
Implement (fork lift, agricultural trailer hitch, etc.) position sensing Steer, throttle by wire Gear selection Zero-contact encoder alternative Replacement for smart bearings Outboard trim sensing
6g sinusoidal, 8 g RMS axial; 40Hz – 2 kHz all 3 axes
Vibration
-40 °C to 125 °C (-40 °F to 257 °F) with Delphi connectors,
Operating Temperature
-40 °C to 150 °C (-40 °F to 302 °F) with wire leads -40 °C to 150 °C (-40 °F to 302 °F)
Storage Temperature Ingress Protection
IP67
Electrical Specifications
Input Voltage
5.0 VDC ± 10% 10% to 90% of input (see graph for voltage vs. rotation angle
Output Voltage
characteristics)
Input Current
14 mA typ., 16 mA max.
Output Current
-8 mA to 8 mA
Output Accuarcy
±3.5%
Output Linearity
±3.5%
Maximum Overvoltage
16 VDC
Absolute Max. Output Current
±30 mA
Output Type
Analog (PWM available)
Mechanical Specifications
Housing Material
Glass Reinforced Plastic
Mechanical Travel
0° to 360° (continuous) Delphi Metri-pak 150.2 12162185; Terminal 1214075 / 2047680
Mating Connector
Maximum Air Gap\*
5.5 mm (0.22")
\*with AS500106 magnet carrier
2 mm radial (magnet to center)
Maximum Center-To-Center Offset
www.cherryswitches.com
Page 1 of 2, last update 2014-10-29, Specifications subject to change without notice.
Page 2
Products
Part Number Sensor (incl.
Sensing Wires
(Sensor)
AS500106 magnet) Range
AN820001
CU103601
180° N/A
AN820002
CU103602
360° N/A
AN820003\* CU103603
45° N/A
AN820031
--------
180° 18 AWG x 305 mm (12")
AN820032
--------
360° 18 AWG x 305 mm (12")
AN820033\* --------
45° 18 AWG x 305 mm (12")
\*Not commonly stocked
Sensor Output
Connectors
Terminals
Packard Metri-pack 1214075 / 2047680 Packard Metri-pack 1214075 / 2047680 Packard Metri-pack 1214075 / 2047680 N/A
N/A
N/A
N/A
N/A
N/A
Page 2 of 2, last update 2014-10-29, Specifications subject to change without notice.