AN7510 PANASONIC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 25

Technical content

New publication, effective from Jan. 13 1999. ¶ The products and specifications are subject to change without any notice. Please ask for the latest product standards to guarantee the satisfaction of your product requirements. Matsushita Electronics Corporation BTL Audio Power IC AN7510/7520 Series n Overview The AN7510/7520 series is a 0.5W to 3W BTL audio power amplifier IC. Equipped with a standby function and mute or DC volume circuit, the series includes a lineup of single and dual output models. With simplified set design due to minimum external components, this IC has a wide variety of applications. n Features

  • Operating power sourcs voltage: 3.0V to 13.5V.
  • Built-in standby function.
  • Built-in mute or DC volume circuit. n Specifications n Applications l TVs l Audio equipment l Personal computers l Active speakers Output power Parameters Product name AN7520 AN7521 AN7522 AN7523 Vcc Load resistanceStandby Mute V olume Package AN7510 AN7511 AN7512 AN7513 1.0W·2ch 5V 8W HDIP-16pin 1.0W·1ch 5V 8W HDIP-16pin1.0W·2ch 5V 8W DIP-8pin 1.0W·1ch 5V 8W DIP-8pin AN7510S AN7511S AN7512S AN7513S 0.5W·2ch 5V 16W SOP-16pin 0.5W·1ch 5V 16W SOP-16pin0.5W·2ch 5V 16W SOP-8pin 0.5W·1ch 5V 16W SOP-8pin 3.0W·2ch 8V 8 W HSIP-12pin 3.0W·1ch 8V 8 W HSIP-12pin3.0W·2ch 8V 8 W HSIP-9pin 3.0W·1ch 8V 8 W HSIP-9pin * : Planned

AN7510, AN7510S Dual 0.5,1W BTL Audio Power Amplifier Circuit n Features

  • AN7510: Vcc=5V,Output=1W(8W )
  • AN7510S:Vcc=5V,Output=0.5W(16W )
  • Built-in Standby function.
  • Built-in Mute circuits. n Applications
  • TVs, Audio equipment, Personal computers,Active speakers Unit : mm Unit : mm SOP016-P-0300 AN7510 AN7510S n Block Diagram HDIP016-P-0300 28dB 28dB AttenuatorAttenuator Ripple Rejection Circuit Thermal Shutdown Attenuator control V CC GND (ch.1 Output) GND (ch.2 Output) ch.2 Output ch.2 Output Standby N.C. N.C. N.C. N.C. GND Mute ch.1 Output ch.1 Output ch.1 Input ch.2 Input 28dB 28dB 27.4±0.3 6.35±0.3 4.7±0.25 1.06±0.25 3.05 ±0.250.5±0.1 1.2±0.252.54±2.54 1.7 1.5±0.13.80±0.3 7.62±0.25 0 to 6 0.45+0.1 –0.05 0.5±0.1f2.1 5.08±0.1 21.6±0.3 0.4±0.25 1.27(0.4) 34567821 14 13 12 11 10 91516 10.09±0.3 7.6±0.3 2.05±0.2 0.1±0.1 0.9±0.250.9±0.25 5.5±0.3(0.4) 0.2 +0.1 –0.05

-25 to +70 2.0 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions Pin No. Pin No. Function N.C Standby ch1 Input GND(Input) Mute ch2 Input N.C ch2 Output(-) Function N.C GND(Output ch2) ch2 Output(+) Vcc ch1 Output(+) GND(Output ch1) ch1 Output(-) N.C AN7510,7510S AN7510 -55 to +150 AN7510S -55 to +125 AN7510 1127 AN7510S 236

min. 0.8 -300 max. 100 0.4 0.5 300 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Muting effect Channel balance Channel crosstalk Unit mA mA mVrms dB W dB mV dB dB dB Symbol I CQ ISTB V NO G V THD PO RR V off MT CB CT Condition V IN=0mV V IN=0mV Rg=10k W PO =0.25W PO =0.25W THD=10% Rg=10k W PO =0.25W PO =0.25W PO =0.25W n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.14 0.05 1.1 Rg=10k W Vr=1Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit 10mF 68kW 10kW 270kW 3 Standby V IN1 1.0mF 47kW 10kW 100kW V IN2Mute Out2 Out1 V CC AN7510,7510S

n Printed Board Circuit Layout TAB TAB GND(Input) V IN(ch.2) Mute/V olume V IN(ch.1) Standby ch.2 Out- ch.2 Out+ ch.1 Out+ ch.1 Out- V CC GND 16 15 14 13 12 11 10 9 12345678 n Characteristic Curve(AN7510) n Package Power Dissipation 02 468 1 0 1 2 1 4 Supply Voltage VCC (V) freq=1kHz THD =10% R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V V MUTE =0V Output Power PO (W) ch.2 ch.1 0.001 0.01 0.1 1 10 100 1000 Input Voltage VIN (mVrms) Output Power PO (W) 0.01 0.1 100 Total Harmonic Distortion THD (%) PO (ch.1),PO (ch.2) V CC =5V freq=1kHz R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V V MUTE =0V THD(1kHz) THD(10kHz) AN7510,7510S PO - VCC PO,THD - V IN Ambient Temperature Ta (°C ) 2000 1800 1600 1400 1200 1000 800 600 400 200 0 25 50 75 100 125 150 Power Dissipation PD (mW) 1) AN7510:Rthj-a=71°C/W,PD =1761mW(25 °C) 2) AN7510S:Rthj-a=127°C/W,PD =787mW(25 °C) Glass epoxy PCB(75mm·75mm ·t0.8mm) 3) AN7510S:Rthj-a=233°C/W,PD =429mW(25 °C)

AN7511, AN7511S 0.5,1W BTL Audio Power Amplifier Circuit n Features

  • AN7511: Vcc=5V,Output=1W(8W )
  • AN7511S:Vcc=5V,Output=0.5W(16W )
  • Built-in Standby function.
  • Built-in Mute circuits. n Applications
  • TVs, Audio equipment, Personal computers,Active speakers Unit : mm Unit : mm SOP008-P-0225C AN7511 AN7511S n Block Diagram DIP008-P-0300 6.4±0.2 9.2±0.2 3.35±0.2 3.89±0.2 0.5 1.32.54 1.5 7.62±0.3 0.3 +0.1 –0.05 0˚ to 15˚ 0.3±0.26 0.9 1.0 5.01±0.20 (1.05) 0.40(0.60) 0.50±0.20 0 to 10 4.30±0.20 1.75max. 1.45±0.100.10±0.10 6.40±0.20 0.1 +0.10 –0.05 SEATING PLANE 1.27 +0.10 –0.05 0.10 Attenuator Ripple Rejection Circuit Thermal Shutdown Attenuator control V CC Standby GND Output Output Output GND Mute Input 28dB 28dB

-55 to +150 -25 to +70 1.0 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions Pin No. Function Standby ch1 Input GND(Input) Mute Vcc ch1 Output(+) GND(Output1) ch1 Output(-) AN7511,7511S AN7511 541 AN7511S 245

min. 0.8 -300 max. 0.4 0.5 300 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Muting effect Unit mA mA mVrms dB W dB mV dB Symbol I CQ ISTB V NO G V THD PO RR V off MT Condition V IN=0mV V IN=0mV Rg=10k W PO =0.25W PO =0.25W THD=10% Rg=10k W PO =0.25W n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.14 0.05 1.1 Rg=10k W Vr=1Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit 10mF 68kW 10kW 270kW Standby V IN1 1.0mF 47kW 100kW Mute Out1 V CC AN7511,7511S

n Printed Board Circuit Layoutn Package Power Dissipation GND(Input) Mute/V olume V IN(ch.1) Standby ch.1 Out+ ch.1 Out- V CC GND 8765 1234 n Characteristic Curve(AN7511) 02 468 1 0 1 2 1 4 Supply Voltage VCC (V) freq=1kHz THD =10% R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V V MUTE =0V Output Power PO (W) PO (8W ) 0.001 0.01 0.1 1 10 100 1000 Input Voltage VIN (mVrms) Output Power PO (W) 0.01 0.1 100 Total Harmonic Distortion THD (%) PO V CC =5V freq=1kHz R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V V MUTE =0V THD(1kHz) THD(100kHz) THD(10kHz) AN7511,7511S PO,THD - V INPO - VCC 1000 900 800 700 600 500 400 300 200 100 02 5 5 0 7 5 70 100 125 150 Power Dissipation PD (mW) Ambient Temperature Ta (°C) 1) AN7511:Rthj-a=148°C/W,PD =845mW(25 °C) 2) AN7511S:Rthj-a=209.3°C/W,PD =597mW(25 °C) Glass epoxy PCB(50mm·50mm ·t0.8mm) 3) AN7511S:Rthj-a=326.6°C/W,PD =383mW(25 °C)

AN7512, AN7512S Dual 0.5,1W BTL Audio Power Amplifier Circuit n Features

  • AN7512: Vcc=5V,Output=1W(8W )
  • AN7512S:Vcc=5V,Output=0.5W(16W )
  • Built-in Standby function.
  • Built-in DC volume circuits. n Applications
  • TVs, Audio equipment, Personal computers,Active speakers Unit : mm Unit : mm SOP016-P-0300 AN7512 AN7512S n Block Diagram HDIP016-P-0300 27.4±0.3 6.35±0.3 4.7±0.25 1.06±0.25 3.05 ±0.250.5±0.1 1.2±0.252.54±2.54 1.7 1.5±0.13.80±0.3 7.62±0.25 0 to 6 0.45+0.1 –0.05 0.5±0.1f2.1 5.08±0.1 21.6±0.3 0.4±0.25 1.27(0.4) 34567821 14 13 12 11 10 91516 10.09±0.3 7.6±0.3 2.05±0.2 0.1±0.1 0.9±0.250.9±0.25 5.5±0.3(0.4) 0.2 +0.1 –0.05 28dB 28dB AttenuatorAttenuator Ripple Rejection Circuit Thermal Shutdown Attenuator control V CC GND (ch.1 Output) GND (ch.2 Output) ch.2 Output ch.2 Output Standby N.C. N.C. N.C. N.C. GND V olume ch.1 Output ch.1 Output ch.1 Input ch.2 Input 28dB 28dB

-25 to +70 2.0 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions Pin No. Pin No. Function N.C Standby ch1 Input GND(Input) DC volume ch2 Input N.C ch2 Output(-) Function N.C GND(Output ch2) ch2 Output(+) Vcc ch1 Output(+) GND(Output ch1) ch1 Output(-) N.C AN7512,7512S AN7512 -55 to +150 AN7512S -55 to +125 AN7512 1127 AN7512S 236

min. 0.8 -250 max. 100 0.4 0.5 250 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Maximum attenuation Input impedance Channel balance1 Channel balance2 Center voltage gain Channel crosstalk Unit mA mA mVrms dB W dB mV dB kW dB dB dB dB Symbol I CQ ISTB V NO G V THD PO RR V off Att ZI CB1 CB2 G VM CT Condition V IN=0mV,Vol.=0V V IN=0mV,Vol.=0V Rg=10k W ,Vol.=0V PO =0.25W,Vol.=1.25V PO =0.25W,Vol.=1.25V THD=10%,Vol.=1.25V Rg=10k W ,Vol.=0V PO =0.25W,Vol=0V V IN=–0.3VDC PO =0.25W,Vol=1.25V PO =0.25W,Vol=0.6V PO =0.25W,Vol=0.6V PO =0.25W,Vol=1.25V n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.10 0.10 1.1 Rg=10k W,Vol.=0V Vr=0.5Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit 10mF 68kW 10kW 270kW 3 Standby V IN1 1.0mF 1.0mF 10kW V IN2V olume Out2 Out1 V CC 1.0mF AN7512,7512S

n Printed Board Circuit Layout TAB TAB GND(Input) V IN(ch.2) Mute/V olume V IN(ch.1) Standby ch.2 Out- ch.2 Out+ ch.1 Out+ ch.1 Out- V CC GND 16 15 14 13 12 11 10 9 12345678 n Package Power Dissipation AN7512,7512S Ambient Temperature Ta (°C ) 2000 1800 1600 1400 1200 1000 800 600 400 200 0 25 50 75 100 125 150 Power Dissipation PD (mW) 1) AN7512:Rthj-a=71°C/W,PD =1761mW(25 °C) 2) AN7512S:Rthj-a=127°C/W,PD =787mW(25 °C) Glass epoxy PCB(75mm·75mm ·t0.8mm) 3) AN7512S:Rthj-a=233°C/W,PD =429mW(25 °C)

AN7513, AN7513S 0.5,1W BTL Audio Power Amplifier Circuit n Features

  • AN7513: Vcc=5V,Output=1W(8W )
  • AN7513S:Vcc=5V,Output=0.5W(16W )
  • Built-in Standby function.
  • Built-in DC volume circuits. n Applications
  • TVs, Audio equipment, Personal computers Unit : mm Unit : mm SOP008-P-0225A AN7513 AN7513S n Block Diagram DIP008-P-0300B 9.4–0.3 2.54 6.3–0.3 3.8–0.25 0.15 +0.1 –0.05 (3.45) 0.51 min. 1.2–0.25 0.5–0.1 7.62–0.253 to 15° 0.4–0.25 0.6–0.31.27 5.0–0.3 0.1–0.1 0.3 4.2–0.3 6.5–0.3 0.15 0.65 1.5–0.2 Attenuator Ripple Rejection Circuit Thermal Shutdown Attenuator control V CC Standby GND Output Output Output GND V olume Input 28dB 28dB

-55 to +150 -25 to +70 1.0 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions AN7513,7513S Pin No. Function Standby ch1 Input GND(Input) DC volume Vcc ch1 Output(+) GND(Output1) ch1 Output(-) AN7513 541 AN7513S 245

min. 0.7 -250 20.5 max. 0.4 0.5 250 26.5 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Maximum attenuation Center voltage gain Unit mA mA mVrms dB W dB mV dB dB Symbol I CQ ISTB V NO G V THD PO RR V off Att G VM Condition V IN=0mV,Vol.=0V V IN=0mV,Vol.=0V Rg=10k W ,Vol.=0V PO =0.25W,Vol.=2.5V PO =0.25W,Vol.=2.5V THD=10%,Vol.=2.5V Rg=10k W ,Vol.=0V PO =0.25W,Vol=0V PO =0.25W,Vol=0.1.25V n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.10 0.10 1.0 23.5 Rg=10k W,Vol.=0V Vr=1.0Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit AN7513,7513S 10mF 68kW 10kW 270kW Standby V IN1 V olume Out1 V CC 1.0mF

n Printed Board Circuit Layout TAB TAB GND(Input) V IN(ch.2) Mute/V olume V IN(ch.1) Standby ch.2 Out- ch.2 Out+ ch.1 Out+ ch.1 Out- V CC GND 16 15 14 13 12 11 10 9 12345678 n Package Power Dissipation AN7513,7513S 1000 900 800 700 600 500 400 300 200 100 02 5 5 0 7 5 70 100 125 150 Power Dissipation PD (mW) Ambient Temperature Ta (°C) 1) AN7513:Rthj-a=148°C/W,PD =845mW(25 °C) 2) AN7513S:Rthj-a=209.3°C/W,PD =597mW(25 °C) Glass epoxy PCB(50mm·50mm ·t0.8mm) 3) AN7513S:Rthj-a=326.6°C/W,PD =383mW(25 °C)

Dual 3W BTL Audio Power Amplifier Circuit n Features

  • Vcc=8V,Output=3W(8W )
  • Built-in Standby function.
  • Built-in DC volume circuits. n Applications
  • TVs, Audio equipment, Personal computers,Active speakers Unit : mm n Block Diagram HSIP012-P-0000A 7.7±0.3 (12.5) 19.1±0.3 21.9±0.3 (1.2) (10.0)(10.0) 29.6±0.3 20.0±0.3 0.6 28.0±0.3 29.75±0.30 f3.6 R1.8 0.6 (1.27) (1.27) (1.3) 121 +0.15 –0.052.540.25 1.45±0.151.80±0.15 1.2±0.1 3.5±0.3 +0.10 –0.05 V CC ch1. Output ch.1 Output Standby GND (ch.1 Output) GND (ch.2 Output) GND ch.1 Input ch.2 Input V olume ch.2 Output ch.2 Output

-55 to +150 -25 to +70 2.0 1920 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions Pin No. Pin No. Function Vcc ch1 Output(+) GND(Output ch1) ch1 Output(-) Standby ch1 Input Function GND(Intput) ch2 Input DC Volume ch2 Output(-) GND(Output ch2) ch2 Output(+) AN7522

min. 2.4 -250 max. 100 0.4 0.5 250 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Maximum attenuation Input impedance Channel balance1 Channel balance2 Center voltage gain Channel crosstalk Unit mA mA mVrms dB W dB mV dB kW dB dB dB dB Symbol I CQ ISTB V NO G V THD PO RR V off Att ZI CB1 CB2 G VM CT Condition V IN=0mV,Vol.=0V V IN=0mV,Vol.=0V Rg=10k W ,Vol.=0V PO =0.25W,Vol.=1.25V PO =0.25W,Vol.=1.25V THD=10%,Vol.=1.25V Rg=10k W ,Vol.=0V PO =0.25W,Vol=0V V IN=–0.3VDC PO =0.25W,Vol=1.25V PO =0.25W,Vol=0.6V PO =0.25W,Vol=0.6V PO =0.25W,Vol=1.25V n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.10 0.10 3.0 Rg=10k W,Vol.=0V Vr=0.5Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit AN7522 Out2 Out1 10mF 68kW 10kW 270kW Standby V IN1 470mF V CC 1.0mF 10kW V IN2 V olume 1.0mF

n Printed Board Circuit Layoutn Package Power Dissipation n Characteristic Curve AN7522 PO - VCC PO,THD - V IN 02 468 1 0 1 2 1 4 Supply Voltage VCC (V) freq=1kHz THD =10% R L=8W ,16W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V Vol.=1.25V Output Power PO (W) ch.2(8W ) ch.1, ch.2(16W ) ch.1(8W ) 0.001 0.01 0.1 1 10 100 100 1000 Input Voltage VIN (mVrms) Output Power PO (W) 0.01 0.1 Total Harmonic Distortion THD (%) V CC =8V freq=1kHz R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V Vol.=1.25V PO (ch.1) THD(ch.1,10kHz) PO (ch.2) THD (ch.1,100kHz) THD (ch.2,100kHz) THD (ch.1,1kHz) THD(ch.2,10kHz) THD(ch.2,1kHz) 20°C/W Heat sink 10°C/W Heat sink 5°C/W Heat sink 02 5 5 0 7 5 70 100 125 150 Without heat sink R thj-a=41.7°C/W Ambient Temperature Ta (°C ) Power Dissipation PD (mW) GND GND(Input) V IN(ch.2) Mute/V olume V IN(ch.1) Standby V CC 4567123 89 1 0 1 1 12 ch.2 Out+ ch.2 Out- ch.1 Out+ ch.1 Out-

3W BTL Audio Power Amplifier Circuit n Features

  • Vcc=8V,Output=3W(8W )
  • Built-in Standby function.
  • Built-in DC volume circuits. n Applications
  • TVs, Audio equipment Unit : mm AN7523 n Block Diagram HSIP099-P-0000 f3.3±0.1 0.1±0.05 5.6±0.25 1.7±0.25 1.7±0.25 0.45 +0.1 –0.05 f2.65±0.10 8.4±0.25 3.75±0.250.50±0.10 1.20±0.252.54 15.0 19.9±0.10 18.3±0.25 5.8±0.25 1.5±0.25 6.3±0.3 7.1±0.25 22.3±0.3 V CC Output GND Output Output Standby Input GND N.C. V olume

-55 to +150 -25 to +70 1.0 1220 n Absolute Maximum Ratings Note1) Ta=25ºC except storage temperature and operating ambient temperature. Note2) At no-signal. Unit ºC ºC V A mW Note Ta=70ºC Symbol T stg Topr V cc Icc PD Parameter Storage temperature Operating ambient temperature Supply voltage Supply current Power dissipation Operating supply voltage range Vcc 3.5V to 13.5V n Operating Supply Voltage Range n Pin Descriptions AN7523 Pin No. Function Vcc ch1 Output(+) GND(Output1) ch1 Output(-) Standby ch1 Input GND N.C DC volume

min. 2.4 -250 20.5 -12 max. 0.4 0.5 250 26.5 Parameter Quiescent current Standby current Output noise voltage Voltage gain Total harmonic distortion Maximum power output Ripple rejection ratio Output offset voltage Maximum attenuation Center voltage gain Standby terminal current Volume terminal current Unit mA mA mVrms dB W dB mV dB dB mA mA Symbol I CQ ISTB V NO G V THD PO RR V off Att G VM ISTB Ivol Condition V IN=0mV,Vol.=0V V IN=0mV,Vol.=0V Rg=10k W ,Vol.=0V PO =0.25W,Vol.=1.25V PO =0.25W,Vol.=1.25V THD=10%,Vol.=1.25V Rg=10k W ,Vol.=0V PO =0.5W,Vol=0V PO =0.5W,Vol=0.6V V IN=0mV,V STB =3V V IN=0mV,Vol=0V n Electrical Characteristics (Vcc=5.0V,RL=8W ,freq=1kHz,Ta=25ºC –2 ºC) typ. 0.10 0.10 3.0 23.5 Rg=10k W,Vol.=0V Vr=0.5Vrms,fr=120Hz Note Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)> n Application Circuit AN7523 Out1 10mF 68kW 10kW 270kW Standby V IN1 470mF V CC 1.0mF V olume

n Printed Board Circuit Layoutn Package Power Dissipation n Characterristic Curve AN7523 PO - VCC PO,THD - V IN 02 468 1 0 1 2 1 4 Supply Voltage VCC (V) freq=1kHz THD =10% R L=8W ,16W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V Vol.=1.25V Output Power PO (W) 16W 2000 1800 1600 1400 1200 1000 800 600 400 200 0 25 50 75 100 125 150 Without heat sink R thj-a=65.5°C/W PD =1880mW(25 °C) Ambient Temperature Ta (°C ) Power Dissipation PD (mW) GND GND(Input) Mute/V olume V IN(ch.1) Standby V CC 4567123 89 ch.1 Out+ ch.1 Out- 0.001 0.01 0.1 1 10 100 100 1000 Input Voltage VIN (mVrms) Output Power PO (W) 0.01 0.1 Total Harmonic Distortion THD (%) V CC =8V freq=1kHz R L=8W 400Hz HPF 30kHz LPF 2-ch Input R g=10kW V STB =5V Vol.=1.25V PO THD(10kHz) THD(100kHz) THD(1kHz)