AN2492FH

AN2492FH PANASONIC

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 23

Technical content

Luminance and chrominance signal processing circuit for 8 mm video (NTSC) n Overview The AN2492FH is a single chip LSI on which Y/C main signal processing circuit of NTSC normal 8 mm VCR is integrated. It is possible to reduce the system cost drastically thanks to the introduction of an external filter on to the chip and fc auto adjustment. n Features

• 5 V single power supply
• Reduction of the external components and adjusting parts by adopting automatic adjustment filter
• No need of glass delay lines
• For NTSC (PAL: AN2493 pin-compatible) n Applications
• 8 mm VCR, 8 mm video camera QFP064-P-1010 Unit: mm 10.00–0.20 48 33 161 12.00–0.20 10.00–0.20 0.10–0.10 (1.25) (1.25) 0.50 0.18 +0.10 -0.05 0.15 +0.10 -0.05 Seating plane (1.00) 0.50–0.20 0° to 10°

f det. PB APC det. PG in C VCC CK Data C GND C MIX in PB C out CLCA det. REC C out GCA4 CTL NL in LNC out ADD out CONP C L IMC To CCD G2 det. YCL det. YDL in Y GND VNF VF mute CTL V mute CTL Clamp det. Line in VF out Video out Y V CC CL in ML out CTL1 CCL det. CDL in G1 det. V REF VXO f det. REC APC RF AGC 90 PS DP PC DEMOD D LIM F PC SLD VCO Sub BM 1/46 1/8 1/8 CL det. GCA4 GCA3 GCA2 GCA1 Trap CACC HPF1 HPF LPF LPFACCBM BPF HPF LIM HSS ATT Amp. LIM CORR Main LPF Sync. MIX Det. Det.Clamp Clamp Clamp Clamp Trap Mute CNR MOD W/D Smear N.C. ACC det. REC AFC C sub LPF Burst DE/EM Chroma DE/EM 4DIV CK DL DOC ATT AGC OSD OSD OSDClamp SS CK PC PBA PC DCL Amp. Amp. Sub LPF AGC det. MA in LIM Clip VXO in VXO out REC APC det. Clip in DCL in MDC MDE D LIM in RF out FM in RF det. SS out SS det. REC PB VOL CONP Y AGC det. V REF det. fSC out f0 CTL PB C in CEC det. CE CTL GCA3 CTL DEV CTL ME out (COR det. out) W CTL ME NF FM out (DOC) SW 19 SW 21 SW 0 SW 1 SW 3 SW 4 R P Test 9 C NOR PS N DOC CONP SW 6 SW 5 Line PBY P R SW 11 SW 8 SW 12 V mute CTL R P (d) Sub 2C A PB PR CK SW 13 SW 14SW 17 P PP PP P R RR R R R SW 15 SW 16 SW 18 SW 2 Line CONP PB

Pin No. Description

1 VXO in

2 REC APC det. 3V REF det. 4f SC out 5 f det. 6 PB APC det. 7 PG in. 8C V CC 9C K

10 Data

11 C GND

12 C MIX in

13 PB C out

14 CLCA det.

15 REC C out

16 GCA4 CTL

17 PB C in

18 CEC det. 19 Chroma emph. CTL

20 GCA3 CTL (APT CTL)

21 FM out (DOC)

22 DEV CTL

24 ME out (COR det. out)

25 W CTL

26 MENF

27 NL in

28 LNC out

29 CCL det.

30 CDL in

31 G1 det.

32 ADD out

Pin No. Description

33 GCA1 CTL

34 CONP C

35 LIMC

36 To CCD

37 G2 det.

38 YDL in

39 YCL det.

40 CL in

41 ML out

42 Y GND

43 Video out

44 Y V CC

45 VNF

46 VF mute CTL

47 VF out (BGP out)

48 V mute CTL

49 Clamp det.

50 Line in

51 AGC det.

52 CONP Y

53 REC PB VOL

54 SS det.

55 SS out

56 RF det.

57 FM in

58 RF out

59 DLIM in

60 MD E

61 MD C

62 DCL in

63 Clip in

64 VXO out

Parameter Symbol Conditions Min Typ Max Unit Consumption current 1 I CC1 Consumption current for recording 52 72 92 mA Consumption current 2 I CC2 Consumption current for playback 58 78 98 mA Consumption current 3 I CC3 Power save mode 42 62 82 mA Consumption current 4 I CC4 Camera power save mode -8 -4.2 -1m A Internal reference voltage source VREF Pin 3 voltage ¾ 2.5 ¾ V REC overall V ME Adjust pin 53 to set pin 47 output-14 -12 -10 dB at 1 V[p-p] Y-AGC control characteristicsDV AGC Pin 47 output gain ratio with input-1.5 0 1.5 dB 0.5 V[p-p] and 2.0 V[p-p] Y-AGC through mode V 26S Pin 24 output at pin 50 input 200 250 300 mV[p-p] View finder amp. frequency f BA Output ratio of 5 MHz/100 kHz -1.5 0 1.5 dB characteristics at input 100 kHz, 5 MHz Video-OSD white mute level V OW DC voltage based on a pedestal level 56 68 80 IRE Video-OSD black mute level V OB DC voltage based on a pedestal level-7 0 12 IRE Video-OSD white mute CTL V 48W Pin 48 input at inserting a record 3.6 ¾ 4.8 V voltage character Video-OSD black mute CTL V 48B Pin 48 input at inserting a record 2.0 ¾ 2.6 V voltage character Video-OSD through CTL voltage V 48S Pin 48 input at inserting a record 0 ¾ 1.0 V character n Absolute Maximum Ratings Parameter Symbol Range Unit Supply voltage V CC 4.7 to 5.2 V n Recommended Operating Range Parameter Symbol Rating Unit Supply voltage V CC 5.5 V Supply current I CC 100 mA Power dissipation *2 PD 359 mW Operating ambient temperature *1, *3 T opr -10 to +70 °C Storage temperature *1 Tstg -55 to +125 °C Note) *1: Except for the power dissipation, operating ambient temperature and storage temperature, all ratings are for Ta = 25°C. *2: The power dissipation shown is for the IC package at Ta = 70°C. PD = 696 (mW) (Ta = 70°C) in mounting on the glass epoxy printed circuit board of 50 · 50 · 0.8 (mm). *3: PD = 471 (mW) at supply voltage VCC = 4.8 V. n Electrical Characteristics at VCC = 4.8 V, Ta = 25°C

Parameter Symbol Conditions Min Typ Max Unit Video-OSD quasi V level V OV DC voltage difference based on sync.-100 -50 0 mV tip in PB mode Video-OSD quasi V mute CTL V 48V PB mode, pin 48 input 2.0 ¾ 4.8 V voltage Video-OSD through CTL V 48G PB mode, pin 48 input 0 ¾ 1.0 V voltage Y-main-LPF frequency Df ML1 Input: 100 kHz, 2.5 MHz -5 -22 d B characteristics 1 Output: 2.5 MHz/100 kHz Y-main-LPF frequency Df ML2 Input: 100 kHz, 3.58 MHz ¾¾ - 25 dB characteristics 2 Output: 3.58 MHz/100 kHz Video amp. output amplitude V VO VF out 1 V[p-p] adjustment 1.75 2.0 2.25 V[p-p] Video amp. frequency f VI Input: 100 kHz, 5 MHz -1.5 0 1.5 dB characteristics Output: 5 MHz/100 kHz View finder OSD white mute levelV BOW DC voltage based on a pedestal level 56 68 80 IRE View finder OSD black mute levelV BOB DC voltage based on a pedestal level-7 0 12 IRE View finder OSD white mute V 46W Pin 48 = 0 V at inserting 3.6 ¾ 4.8 V CTL voltage the display characters View finder OSD black mute V 46B Pin 48 = 0 V at inserting 2.0 ¾ 2.6 V CTL voltage the display characters View finder OSD through CTL V 46S Pin 48 = 0 V at inserting 0 ¾ 1.0 V voltage the display characters View finder OSD quasi V level VBOV DC voltage based on sync. tip in -60 -20 20 mV PB mode View finder OSD quasi V mute VB48V PB mode, pin 48 input 2.0 ¾ 4.8 V CLT voltage View finder OSD through CTL V B48S PB mode, pin 48 input 0 ¾ 1.0 V voltage PB OSD white mute level V POW DC voltage based on a pedestal level 56 68 80 IRE PB OSD black mute level V POB DC voltage based on a pedestal level-7 0 12 IRE PB OSD white mute CTL V 46W Pin 48 = 0 V at inserting 3.6 ¾ 4.8 V voltage the display characters PB OSD black mute CTL V 46B Pin 48 = 0 V at inserting 2.0 ¾ 2.6 V voltage the display characters PB OSD through CTL voltage V 46S Pin 48 = 0 V at inserting 0 ¾ 1.0 V the display characters PB OSD off V VOO Pin 48 = 0 V at inserting 1.75 2.0 2.25 V[p-p] the display characters Sync. separation min. input V SS Input sync. level ¾¾ 65 mV[p-p] sensitivity Sync. separation pulse delay tSS Measurement of sync. delay at 560 760 960 ns amount pin 40 and pin 55 n Electrical Characteristics at VCC = 4.8 V, Ta = 25°C (continued)

Parameter Symbol Conditions Min Typ Max Unit Sync. separation output amplitude 1V SSH Pin 55 output amplitude 4.0 ¾¾ V Sync. separation output amplitude 2V SSL Pin 55 output amplitude ¾¾ 0.4 V Non linear emphasis 1 f RNL1 Input: 0 dB, output: 1 MHz/10 kHz 1.0 3.0 5.0 dB Non linear emphasis 2 f RNL2 Input: -10 dB, output: 1 MHz/10 kHz 3.7 6.2 8.7 dB Non linear emphasis 3 f RNL3 Input: -20 dB, output: 1 MHz/10 kHz 6.3 9.3 12.3 dB Non linear de-emphasis 1 f PNL1 Input: 0 dB, output: 1 MHz/10 kHz-5.0 -3.0 -1.0 dB Non linear de-emphasis 2 f PNL2 Input: -10 dB, output: 1 MHz/10 kHz-10 -7.5 -5.0 dB Non linear de-emphasis 3 f PNL3 Input: -20 dB, output: 1 MHz/10 kHz-11.5 -8.5 -5.5 dB Dark clip level V CD Fixed 90 100 110 % White clip level V CW Adjust at pin 25 ¾ 220 ¾ % FM carrier interleave V CI Apply voltage to pin 7 ¾ 1.64 ¾ mV[p-p] FM modulator oscillation frequencyf0 Adjust at pin 23 ¾ 4.2 ¾ MHz FM modulator deviation CTL f DEV Apply voltage to pin 27, adjust at pin 22 ¾ 2.4 ¾ MHz/V FM modulator secondary distortion2fFM Pin 21 output ¾¾ - 30 dB Y-FM-GCA output amplitude 1 V FMS Pin 20 = 0 V ¾¾ 100 mV[p-p] Y-FM-GCA output amplitude 2 V FML Pin 20 = 4.8 V 370 ¾¾ mV[p-p] PB-Y-RFAGC output amplitude V 58 Input 50 mV[p-p], 200 mV[p-p], f = 5 MHz 345 420 495 mV[p-p] PB-Y-RFAGC output secondary distortion 2f58 Input 100 mV[p-p], f = 5 MHz ¾¾ - 30 dB PB-over-all 1 (NOR) V NOR Pin 47 output, adjust pin 53 ¾ 1.0 ¾ V[p-p] FM demodulation linearity 1 DV NOR Input 3 MHz, 5 MHz, 7 MHz 90 97 110 % Pin 63 = 4.8 V, adjust pin 53 Dropout detection on level V DOC Input pin 57, f = 5 MHz -17 -12 -7d B Dropout detection off hysteresisDV DOC Input pin 57, f = 5 MHz 1 4 10 dB Dropout detection ENV off V DOCH Input pin 57, f = 5 MHz 5 8 11 H Dropout detection output high-levelV P21H Input pin 57, pin 21 output 2.8 ¾¾ V Dropout detection output low-levelV P21L Input pin 57, pin 21 output ¾¾ 0.4 V Noise canceller frequency f NC11 Input 0 dB, NC1 mode output -3 - 0.3 0.5 dB characteristics 1 1 MHz/50 kHz Noise canceller frequency f NC12 Input -10 dB, NC1 mode output -3.5 - 0.8 0.5 dB characteristics 2 1 MHz/50 kHz Noise canceller frequency f NC13 Input -20 dB, NC1 mode output -6 -2.3 0 dB characteristics 3 1 MHz/50 kHz Noise canceller frequency f NC14 Input -30 dB, NC1 mode output -10 -6.5 -3.0 dB characteristics 4 1 MHz/50 kHz NC off mode f NCOFF Input -30 dB, NC1 mode output -10 -6.5 -3.0 dB

1 MHz/50 kHz, NC off

Clip comp. limiter level V CL Input pin 63, pin 41 output 45 70 95 mV Line noise canceller frequency fLNC1 Input 0 dB -2.2 - 0.2 1.8 dB characteristics 1 n Electrical Characteristics at VCC = 4.8 V, Ta = 25°C (continued)

Parameter Symbol Conditions Min Typ Max Unit Line noise canceller frequency fLNC2 Input: -30 dB -15.0 -8.5 -3.0 dB characteristics 2 Line noise canceller (off) f LNC3 Input: -30 dB -1.5 0 1.5 dB C-BPF frequency characteristics 1fBP1 Input: 100 mV[p-p], -2.5 - 0.5 -1.5 dB output: 3.28 MHz/3.58 MHz C-BPF frequency characteristics 2fBP2 Input: 100 mV[p-p], -2.5 - 0.5 -1.5 dB output: 3.88 MHz/3.58 MHz C-BPF frequency characteristics 3fBP3 Input: 100 mV[p-p], ¾¾ - 20 dB output: 2.09 MHz/3.58 MHz C-BPF frequency characteristics 4fBP4 Input: 100 mV[p-p], ¾¾ - 20 dB output: 5.07 MHz/3.58 MHz REC APC pull-in range 1 +D fSC Input: fSC +300 Hz 275 ¾¾ Hz Pin 4 output (specified Xtal) REC APC pull-in range 2 -D fSC Input: fSC -300 Hz ¾¾ - 275 Hz Pin 4 output (specified Xtal) Xtal output amplitude V FSC Pin 4 output, at lock (specified Xtal) 320 520 720 mV[p-p] Xtal oscillation frequency f SC Pin 4 frequency deviation at PB -50 ¾ 50 Hz ACC output amplitude V AC Pin 34 input, pin 15 output (test 3) 350 450 600 mV[p-p] ACC control characteristics DV AC Level ratio of -14 dB to 6 dB input -2.0 0 2.0 dB ACC maximum gain V ACM Input/output level ratio 14 20 ¾ dB C ACC output characteristics VCAC Output burst ratio at input chroma 1.0 3 5.0 dB signal 0 dB and -14 dB Burst emphasis amount V BU Pin 34 input, pin 15 output 4.0 6.0 8.0 dB Burst de-emphasis amount V BD Pin 17 input, pin 13 output -8.5 -6.0 -3.5 dB Chroma de-emphasis characteristics 1V CE1 Input: 0 dB, output: fsc +500/fsc -3.3 ¾ 1.3 dB Chroma de-emphasis characteristics 2V CE2 Input: 0 dB, output: fsc -500/fsc -3.3 ¾ 1.3 dB Chroma de-emphasis characteristics 3V CE3 Input: -10 dB, output: fsc -500/fsc -5.8 ¾- 1.0 dB Chroma de-emphasis characteristics 4V CE4 Input: -10 dB, output: fsc +500/fsc -5.8 ¾- 1.0 dB REC chroma out level 1 V RCO1 Pin 16 = 0 V, pin15 output ¾¾ 100 mV[p-p] REC chroma out level 2 V RCO2 Pin 16 = 4.8 V, pin 15 output 230 ¾¾ mV[p-p] Color killer on level CK ON Pin 34 input signal, 100 mV[p-p] fi¾ ¾ 0.4 V 2 mV[p-p], pin15 output DC Color killer off level CK OFF Pin 34 input signal, 0 mV[p-p] fi 1.5 1.9 2.3 V 40 mV[p-p], pin15 output DC PB APC pull-in range 1 DfXO1 Pin 40, pin 17 input, pin 13 output-100 ¾ 100 Hz PB APC pull-in range 2 DfXO2 Pin 40, pin 17 input, pin 13 output-100 ¾ 100 Hz CNR characteristics 1 CNR3 Pin 40 white 50%, pin 52: B+C signal input-13 -9 -5.5 dB CNR characteristics 2 CNR4 Pin 40 white 50%, pin 52: B+C signal input-13 -9 -5.5 dB PB burst level V PBC Pin 13 output burst level 110 200 280 mV[p-p] Clip comp. gain V CG Input pin 63, pin 41 output -8.5 -6 -3.5 dB n Electrical Characteristics at VCC = 4.8 V, Ta = 25°C (continued)

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 1 VXO in 500 mV[p-p] DC 2.76 f = 3.5795 MHz 2 REC APC Det. pin DC 2 – 0.75 det. 3V REF det. Bias pin DC 2.48 4f SC out AC 540 mV[p-p] DC 2.7 f = 3.5795 MHz n Terminal Equivalent Circuits 2.38 kW 1.62 kW 3 kW 5 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 5 f det. Det. pin ¾ 6 PB APC Det. pin DC det. 1.974 – 0.75 7 PG in * FM out comes to high frequency 0 « 4.8 with high carrier interleave (reference: DC 2.5 V) 8C V CC ¾¾ ¾ 9C K 0 « 4.8 (reference: DC 2.5 V) n Terminal Equivalent Circuits (continued) 3 kW 3 kW 3 kW 40 kW 4.8 V 0 V 30 kW 10 kW 4.8 V 0 V

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 10 Data 0 « 4.8 (reference: DC 2.5 V)

11 C GND ¾¾ ¾

12 C MIX in B: 200 mV[p-p] (NTSC) DC 2.475 f = 3.5795 MHz (Input at a low impedance.) 13 PB C out DC 2.145 B: 200 mV[p-p] f = 3.5795 MHz 14 CLCA det. Det. pin DC 3.62 – 0.75 n Terminal Equivalent Circuits (continued) 10 kW 4.8 V 0 V 7.8 kW 3 kW20 kW 200 W 3 kW 3 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V)

15 REC C out REC mode

f = 743 kHz 16 CTL 4 REC out level adjustment 0 to 4.8 17 PB C in DC 2.75 B: 100 mV[p-p] f = 743 kHz Being inputted into PB-C-in with Y+C signal, Y signal is 400 mV[p-p] 18 CE C Det. pin DC 2.9 n Terminal Equivalent Circuits (continued) 30 kW 3 kW30 kW 5 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 19 CE CTL Chroma emphasis, de-emphasis 0 to 4.8 adjustment pin Adjustment off at 1 V or less 20 CTL 3 REC mode (GCA3 control) 0 to 4.8 (1.5 to 3.0)

21 FM out REC mode

DC 3.35 PB mode:

2.5 V or more at DOC on

0.4 V or less at DOC off

22 DEV CTL Adjust to 5.4 MHz with DC 1.3 to 3.7 at 100% white. typ. 2.5 23 f 0 CTL Adjust FM out to 4.2 MHz 1.3 to 3.7 at sync. tip. typ. 2.5 n Terminal Equivalent Circuits (continued) 10 kW 10 kW 10 kW25 kW 100 kW 100 kW 3 kW 100 mV to 400 mV 3 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 24 ME out DC 2.195 25 W CTL Adjust a white clip level to 220%. 1.5 to 3.7 typ. 2.0 26 MENF DC 2.19 (sync. tip) (With exter- nally attached feedback re- sistor R) 27 NL in DC 2.93 (sync. tip) n Terminal Equivalent Circuits (continued) 30 kW 30 kW 30 kW30 kW10 kW 48 kW 250 mV[p-p] 3 kW 250 mV[p-p] 3 kW 500 mV[p-p]

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 28 LNC out DC 3.14 (sync. tip) 29 CCL det. Det. pin DC 2.66 – 0.75 30 CDL in DC 2.755 B: 143 mV[p-p] f = 3.5795 MHz 31 G1 det. Det. pin DC 3.515 – 0.75 n Terminal Equivalent Circuits (continued) 500 mV[p-p] 3 kW 3 kW 50 kW 510 kW 3 kW 50 kW 3 kW 3 kW 3 kW 150 mV[p-p]

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 32 ADD out Adjust pin 33 voltage (CTL1) so as not DC 2.0 to mix a chroma signal. 33 CTL 1 Adjust so that a comb shape chroma DC 2.994 level adjustment pin 32 (ADD out) becomes Y signal only. 34 CONP C DC 1.96 B: 286 mV[p-p] f = 3.5795 MHz 35 LIMC Det. pin DC 2.7 n Terminal Equivalent Circuits (continued) 3 kW 80 kW 120 kW 10 kW 10 kW 10 kW 3 kW 3 kW 30 kW 30 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 36 To CCD DC 2.031 (sync. tip) B: 143 mV[p-p] f = 3.5795 MHz 37 G2 det. Det. pin DC 3.515 – 0.75 38 YDL in DC 2.622 B: 143 mV[p-p] f = 3.5795 MHz 39 YCL det. Det. pin DC 2.66 – 0.75 n Terminal Equivalent Circuits (continued) 20 kW 60 kW 40 kW 3 kW 20 kW kW 16.7 kW 150 mV[p-p] 3 kW 3 kW 50 kW 3 kW 3 kW50 kW 150 mV[p-p] 3 kW3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 40 CL in DC 3.4 (sync. tip) 500 mV[p-p] with 100% white input 41 ML out DC 1.897 500 mV[p-p] with 100% white input

42 Y GND ¾¾ ¾

43 Video out 2 V[p-p] with 100% white input DC 1.236 (sync. tip) B: 0.57 V[p-p] f = 3.5795 MHz

44 Y V CC ¾¾ ¾

45 VNF DC 1.237 (sync. tip) B: 143 mV[p-p] f = 3.5795 MHz Video amp. off when pin 45 is 0.3 V or less n Terminal Equivalent Circuits (continued) 143 mV[p-p] 143 mV[p-p] 3 kW 30 kW 20 kW 3 kW 20 kW 60 kW 0.6V[p-p] 3 kW 20 kW 60 kW 150 mV[p-p]

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 46 VF mute VF amp.-OSD-CTL voltage 0 V to 4.8 V 47 VF out DC 1.968 (sync. tip) B: 286 mV[p-p] f = 3.5795 MHz (1 V[p-p] with 100% white input) 48 V mute Video amp.-OSD-CTL voltage 0 to 5 49 Clamp det. Det. pin DC 3.506 n Terminal Equivalent Circuits (continued) 10 kW 300 mV [p-p]47 10 kW10 kW 3 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 50 Line in DC 3.2 B: 286 mV[p-p] f = 3.5795 MHz (AGC through mode is 6 dB down.) 51 AGC det. Det. pin DC 1.63 52 CONP Y DC 3.2 (AGC through mode is 6 dB down.)

53 REC PB REC mode: Normally

VOL Adjust to 2 V[p-p] at video out. 0 « 4.8 0.7 V to 4.8 V PB mode: Filter off Adjust to 2 V[p-p] at video out. 0 « 0.3 0.7 V to 4.8 V Filter off mode: 0 V to 0.3 V n Terminal Equivalent Circuits (continued) 41.5 kW3.5 kW 60 kW 286 mV [p-p] 286 mV[p-p] 3 kW375 W 100 kW 60 kW 3.5 kW 41.5 kW 53 200 W 3 kW 3 kW3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 54 SS det. Det. pin DC 2.781 55 SS out 4 V « 0.4 V 56 RF det. Det. pin DC 3 57 FM in 200 mV[p-p] DC 3.26 n Terminal Equivalent Circuits (continued) 3 kW 500 W 100 W 100 W 500 kW 40 kW 200 kW 54 55 4 V or more 0.4 V or less 3 kW 3 kW 300 W56 3 kW 20 kW23 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 58 RF out 400 mV[p-p] DC 2.40 59 DLIM in 400 mV[p-p] DC 2.49

60 MDE DC (emitter)

1.6 61 MDC DC 3.4 n Terminal Equivalent Circuits (continued) 30 kW 3 kW

Pin No. Symbol Equivalent circuit Description Vo ltage (V) 62 DCL in DC 3.421 63 Clip in DC 3.4 64 VXO out 350 mV[p-p] DC 3.33 f = 3.5795 MHz n Terminal Equivalent Circuits (continued) 3 kW20 kW 19 kW1 kW 20 kW 900 W 150 mV [p-p]

n Application Circuit Example Note) *1: Optimize the C1 and C2 to meet Xtal characteristics. 1. Adjust variable resistor (VR), V33 voltage and variable resistor in that order so as to get a minimum level of chroma signal at ADD out (pin 32) output. (REC mode, line mode, chroma 100% input) 2. The application circuit diagram in this data is just a typical circuit example as a reference data for use, and whatever the loss caused or the infringement of the third party's industrial property right by the use of this circuit is not our responsibility. Video out Open VF out 16 1 Line in CONP in PB FM in SS out (JOG*DOC) 0.22 mF 3.3 mF 10 mF 0.22 mF 0.01 mF 0.01 mF 3.3 mF 22 mH 0.47 mF 0 pF 1 mF 1 mF1 mF 0.01 mF 0.01 mF 0.01 mF 0.1 mF 100 mF 100 mF10 mF0.01 mF 0.01 mF 0.01 mF 47 pF 82 pF 27 pF 720 pF 0.47 mF 3.3 mF 6 800 pF 75 W High V CC (Y) = 4.8 V 75 W V53 1.2 kW 1.2 kW 1.2 kW 22 kW 10 kW 10 kW 10 kW 10 kW 75 W 3 kW

470 W C1

Xtal (*1) 470 W 75 W C V CC 4.8 V REC out V16 Data CK PG in PB C in REC: FM out (PB: DOC out) V19V20 V21 V23 V25 1.2 kW 470 W 75 W kW kW M W 0.22 mF 3.3 mF 10 mF 10 mF 0.01 mF 1 mF 1 mF 1 mF10 mF 0.01 mF 0.1 mF 0.01 mF 0.01 mF 0.01 mF 100 mF 100 mF 3.3 mF 0.01 mF 1 mF100 mF 100 mF 4.7 mF 3.3 mF 10 mF 720 pF 150 pF VR ADD out CONP C in NTSCCD-DL V33 1 kW

330 W 75 W

V CC (Y) = 4.8 V V CC (Y) = 4.8 V V CC (Y) = 4.8 V EQ