AN13301A PANASONIC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
Datasheet sections
1Publication date: February 2005 SDB00086AEB DATA SHEET SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. AN13301APart No.
Silicon Monolithic Bi - CMOS IC Function y Video signal output interface for D - terminal Applications y STB Package y 4Directions - 48Pin Plastic Package ( QFP Type )
Block Diagram
Pin Descriptions 30 kΩCb Sag compensation35Lo - ZLine 1 output11 E. F.Cb output36Hi - ZCPS input12 GND37N. C.13 30 kΩDY sag compensation38N. C.14 E. F.DY output39Lo - ZLine 2 output15 GND40GND16 N. C.41Hi - ZI2C data / ctrl 2 input17 Hi - ZMute input42Hi - ZI2C clock / ctrl 2 input18 ( GND )43Lo - ZLine 3 output19 GND44N. C.20 Hi - ZDet input45GND21 Hi - ZMix / CPS input4630 kΩCPS Sag compensation22 N. C.47E. F.CPS output23 N. C.48GND24 VCC34Hi - ZAC input10 E. F.Cr output33Hi - ZDC shift9 30 kΩCr Sag compensation32Hi - ZAY input8 GND31VCC7 GND30VCC6 E. F.AY output29Hi-ZCr input5 30 kΩAY Sag compensation28Hi - ZDC shift4 VCC27Hi - ZCb input3 E. F.AC output26Hi - Zctrl 3 input2 Lo - ZS2 output25Hi - ZDY input1 ImpedanceFunctionPin No.ImpedanceFunctionPin No.
Absolute Maximum Ratings Operating Supply Voltage Range Note) *1 : Expect for the operating ambient temperature and storage temperature , all ratings are for Ta = 25°C. Note) *2 : The above power dissipation shows the package dissipation of the IC without heat sink at TA = 70℃ Refer to the Pd - Ta characteristic curve in page 21. ICC 5.5VCC Power dissipation Supply current Supply voltage Operating shock Operating constant gravity Operating ambient atmospheric pressure Operating ambient temperature Storage temperature Parameter *2mW468P mAICC7 VVCC6 m/s24 900Sopr5 m/s29 810Gopr4 Pa1.013 × 105 ± 0.61 × 105Popr3 *1°C–20 to +70Topr2 *1°C–55 to +125Tstg1 NoteUnitRatingSymbolNo. 4.75 V to 5.25 VVCCOperating supply voltage range
Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general elec- tronic equipment (such as office equipment, communications equipment, measuring instruments and house- hold appliances). Consult our sales staff in advance for information on the following applications:
- Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus- tion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
- Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica- tions satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat- ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.