AMW006 Datasheet PDF & Specifications | DigiCamel IC Datasheet

Manufacturer Specifications

Compare AMW006 variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

2 manufacturers / 2 documents

Manufacturer	Series	Package	Documents	Available	Select specification
List of Unclassifed Man...	-	-	1	PDF HTML	Viewing
Silicon Laboratories	-	-	1	PDF HTML	View spec

Online Datasheet

Read the List of Unclassifed Man... document online.

DATASHEET SEARCH SITE

Document overview

Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 32

Technical content

Datasheet sections

1 General Description
2 Block Diagram
3 Electrical Specifications
3.1 Absolute Maximum Ratings
3.2 Recommended Operating Conditions
3.3 Power Consumption
4 WLAN RF Specifications
4.1 Summary WLAN Specifications
4.2 WLAN Receiver Specifications
4.3 WLAN Transmitter Specifications
5 Pinout and Signal Descriptions
5.1 Pinout
5.2 Pin Description
6 Design Guidelines
6.1 Recommended PCB Footprint
6.2 Routing Recommendations
6.3 Soldering Information
6.4 Module Photograph
6.5 External Antennas
6.6 Application Examples
7 Regulatory Certification
7.1 United States
7.2 Canada
7.3 Europe
7.4 Australia
7.5 New Zealand
7.6 Japan
8 Packaging, Handling and Storage, RoHS
8.1 Packaging
8.2 Handling & Storage
8.3 RoHS Directive
8.4 Tape and Reel Specifications
9 Ordering Information
10 Revision History & Glossary
10.1 Revision History
10.2 Glossary
11 References

ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | i AMWx06 • Embedded Wi-Fi Networking Solutions Disclaimer While the information provided in this document is be- lieved to be accurate, it is under development and ACKme Networks reserves the right to make changes without further notice to the product described herein to improve reliability, function, or design, and makes no guarantee or warranty concerning the accuracy of said information, nor shall it be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon, such information. ACKme Networks makes no warranties of any kind, whether express, im- plied or arising by custom or course of trade or perfor- mance, and specifically disclaims the i mplied warranties of title, non-infringement, merchantability, or fitness for a particular purpose. No part of this document may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photographic, or otherwise, or used as the basis for manufacture or sale of any items without the prior written consent of ACKme Networks. Trademarks ACKme Networks and the ACKme Networks logo are trademarks of ACKme Networks. Other trademarks in this document belong to their respective owners. Copyright © 2014-2015 ACKme Networks. All rights reserved. Document Number: ADS-Mx006 Release Date: September 1, 2015 Contact http://ack.me/contact About this Data Sheet This document provide s information on the AMWx06 802.11b/g/n Wi-Fi networking module from ACKme Networks. Specifications for the module I/O and peripherals are taken from MCU datasheet . Specifica- tions for the WLAN subsystem were compiled from measured data unless otherwise noted. Organization This data sheet is organized into the following sections:  Features & Applications  General Description, Section 1  Block Diagram, Section 2  Electrical Specifications, Section 3  WLAN RF Specifications, Section 4  Pinout and Signal Descriptions, Section 5  Design Guidelines, Section 6  Regulatory Certification, Section 7  Packaging, Handling & Storage, RoHS, Section 8  Ordering Information, Section 9  Revision History & Glossary, Section 10  References, Section 11

Features

 Self-contained ultra-low power Wi-Fi module with microcontroller and secure TCP network stack.  Integrated SPI -serial flash for software upgrades and user accessible read/write file system Wi-Fi  Broadcom single band 2.4GHz IEEE 802.11b/g/n 1x1 Wi-Fi transceiver  Includes support for all Wi-Fi security modes includ- ing Open, WEP, WPA, and WPA2-PSK Microprocessor  ARM Cortex® M4 based microprocessor  AMW006: operates up to 84MHz core frequency  AMW106: operates up to 100MHz core frequency RAM  AMW006: 96 KB  AMW106: 128 KB Interfaces*  UART: 2 x 4-wire up to 10.5Mbit/s  SPI : SPI-Master (42Mbit/s), SPI-Slave (21Mbit/s)  GPIO: Up to 21 GPIOs (overlaid with peripherals)  A/D converter : 9 channel input, 12-bit resolution, 2.4MSPS sampling in single-shot or scan mode  PWM: Up to 14 PWM outputs  Wake-up: Wake pin for ultra-low power operation  Two external antennas for diversity and improved range *Some interfaces share module pins Operational & Radio  Single operating voltage : 3.3V (typical)  All I/O pins are +5V tolerant  Operational Temperature Range: -30°C to +85°C  Weight : 0.07 oz (2g)  Current consumption @ 3.3V, 25°C - VBAT : 0.97µA (with 32k RTC) - Standby : 2.8µA (3.8uA with 32k RTC) - Stop : 10µA with RAM retention (113µs wake) - Wi-Fi Powersave : 0.77mA (DTIM = 3) - Active receive : 5.7mA @ 1Mbit/s UDP  Active transmit : 11.4mA @ 1Mbit/s UDP  Maximum RF transmit power - 802.11b/g : +18 dBm - 802.11n : +14 dBm  Minimum Receive sensitivity - 802.11b/g : -94 dBm - 802.11n : -86 dBm  Sustained TCP throughput : 10 Mbit/s

Applications

 Industrial, M2M and Home Automation - Environmental monitoring - Energy monitoring - Wireless sensing, remote data logging - HVAC, power, light, & thermostat control - Appliance control  Security - Cameras, Doors/Window monitoring - Alarms, Smoke Detectors - Door and entry control  Health & Fitness - Fitness Equipment - Home health monitoring e.g. weight scales  Consumer - Audio, Toys, Robots

1 General Description

The AMW006 and AMW106 modules from ACKme Net- works combine a microcontroller with a BCM43362 Wi - Fi device to provide an advanced stand-alone Wi-Fi and networking solution. The term AMWx06 refers to both modules. An integrated module avoids difficult RF layout and ena- bles designers to rapidly embe d Wi -Fi and secure net- working functionality into virtually any device. The ACKme Networks WiConnect serial-to-Wi-Fi applica- tion, pre-programmed into all modules, may be used to fast-track module integration into end-products. With dimensions of just 20.3mm x 15.2mm and a wide temperature range, the module is suitable for integra- tion into most embedded applications. The Wi-Fi device from Broadcom includes an integrated RF transmit power amplifier and provides superior Wi- Fi performance and full compatibility with all 2.4GHz 802.11b/g/n Wi-Fi networks. Connections for two exter- nal antennas provide applications with maximum radio range and mechanical design flexibility. The microprocessor is based on a high -performance ARM® 32-bit Cortex™-M4. The AMW006/AMW106 microcontroller core operates at a frequency up to 84/100MHz providing up to 125 DMIPS or 1.25 DMIPS/MHz (Dhrystone 2.1). The AMW006 has 96KB of RAM. The AMW106 has 128KB of RAM. The AMWx06 module offers extensive I/O and periph- eral interfaces listed below , and provides additional interface combinations by leveraging multiplexing and alternate function capabilities.  2 x 4-Wire UART interfaces  2 x SPI interfaces (1 master, 1 slave)  21 x GPIOs  9 x 12-bit A/D converters  14 x PWM outputs  1 x ultra-low power wake input The module is powered by a 3.3V power supply, a sepa- rate WLAN power supply pin is provided to minimize noise coupling into the WLAN subsystem. Various powersave modes offer ultra-low power opera- tion. Wake from low power sleep mode is possible using IO pins or the internal real-time clock, and wake from ul- tra-low power standby mode is achieved using the dedi- cated wake pin. The module incorporates a 32.768kHz crystal to main- tain an accurate real time clock. A 32kHz clock output is available on a dedicated module pin in both active power save modes. The 32kHz clock output may be used to drive the clock input of other system devices. This avoids the need for an additional crystal thereby minimizing to- tal system cost. The module has FCC & IC modular approval for use in the United States and Canada, CE approval for use in Europe, TELEC/MIC approval for use in Japan and related approv- als for use in other countries.

2 Block Diagram

cure over the air (OTA) update process. tion when the Wi-Fi networking interface is not required. Figure 1. AMW006 / AMW106 Architecture

1 MByte

3 Electrical Specifications

3.1 Absolute Maximum Ratings

The values in Table 1 reflect absolute maximum ratings from the respective microprocessor and BCM43362 datasheets. Table 1. Absolute Maximum Voltage Ratings Table 2. Absolute Maximum Environmental Ratings

3.2 Recommended Operating Conditions

limits for extended periods can adversely affect long-term reliability of the device. Table 3. Recommended DC Operating Conditions

VDD_3V3 and VDD_WIFI must be at the same voltage when using the Wi-Fi subsystem
The performance of the Wi-Fi subsystem is degraded significantly at low voltages

Table 4. Recommended Environmental Conditions

3.3 Power Consumption

Table 5. Power consumption (VDD_3V3, VDD_WIFI, VBAT @ 3.3V)

Total combined current consumed by all power supplies: VBAT, VDD_3V3, VDD_WIFI.
802.11 beacon Interval = 102.4ms, DTIM=3, Beacon Duration = 1ms @ 1Mbps.
MCU Stop Mode with 113µs wakeup latency (flash in deep power down mode), VDD_WIFI = 0V
Average current receiving 1Mbit/s UDP at 802.11n MCS7
Average current transmitting 1Mbit/s UDP at 802.11n MCS7
Wi-Fi Transmitting at +18dBm CCK 11Mbit/s with maximum duty cycle
Hardware capability; minimum power consumption is dependent on WiConnect version and external compo-

Table 6. 32kHz Crystal Specifications1

Reproduced from manufacturer’s datasheet.

4 WLAN RF Specifications

The AMWx06 WLAN radio specifications are derived from the Broadcom BCM43362 WLAN radio specifications. other antenna port terminated in 50 ohms.

4.1 Summary WLAN Specifications

Table 7. Summary WLAN Specifications

4.2 WLAN Receiver Specifications

Table 8. WLAN Receiver Performance Specifications

1 Mbps DSSS – -94 -91

6 Mbps OFDM – -86 -81

PSDU) at either antenna port3.

65 Mbps MCS0, HT20 – -86 -81

Operation below -20°C and above +65°C with parameter derating per Note 2
Derate receive sensitivity by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C
All measurements performed with the other antenna port terminated in 50 ohms

4.3 WLAN Transmitter Specifications

Table 9. WLAN Transmitter Performance Specifications

1 Mbps DSSS -11 dB +14 +16 +18

11 Mbps CCK -11 dB +14 +16 +18

6 Mbps OFDM -22 dB +12 +14 +16

54 Mbps OFDM -25 dB +12 +14 +16

Operation below -20°C and above +65°C with parameter derating per Note 2
Derate transmit power by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C
All measurements performed with the other antenna port terminated in 50 ohms

5 Pinout and Signal Descriptions

5.1 Pinout

A top view of the AMWx06 pinout is depicted in Figure 2. mended footprint is provided in Section 6.1. Figure 2. AMWx06 Pinout (TOP View – Pins NOT visible from top!)

5.2 Pin Description

Table 10. AMWx06 WiConnect Pin Definitions

3 VBAT S VBAT MCU supply -

4 GPIO_0 I/O Factory Reset2 SPI1_MISO (S), GPIO

5 GPIO_1 I/O GPIO -

6 GPIO_2 I/O GPIO SPI1_SCK (S)

7 GPIO_3 I/O GPIO SPI1_CS (S)

8 GPIO_4 I/O GPIO -

9 OSC_32K_OUT O OSC_32K_OUT -

13 GPIO_5 I/O GPIO SPI1_MOSI (slave), PWM5

Pinout and Signal Descriptions, Section 5 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 9 Pin Name Type1 Primary Function Alternate & Other Function(s) 14 GPIO_6 I/O SPI0_MISO (M) 5 ADC6 (when SPI not in use). Not available for digital I/O. 15 GPIO_7 I/O SPI0_SCK (M) 5 ADC5 (when SPI not in use). Not available for digital I/O. 16 GPIO_8 I/O SPI0_MOSI (M) 5 ADC7 (when SPI not in use). Not available for digital I/O.

17 GPIO_9 I/O GPIO UART0_RTS

18 GPIO_10 I/O GPIO UART0_CTS, PWM0

19 GPIO_11 I/O UART0_RX GPIO, PWM0

20 GPIO_12 I/O UART0_TX GPIO, PWM0

21 GPIO_13 I/O GPIO PWM1

22 GPIO_14 I/O GPIO PWM3

23 GPIO_15 I/O GPIO PWM3

24 GPIO_16 I/O GPIO PWM6

25 GPIO_17 I/O GPIO UART1_RX, ADC3, PWM4

28 GPIO_18 I/O GPIO -

29 GPIO_19 I/O GPIO UART1_TX, ADC2, PWM4

30 GPIO_20 I/O GPIO ADC9, PWM2

31 GPIO_21 I/O GPIO ADC8, PWM2

32 GPIO_22 I/O GPIO UART1_CTS, WAKE, ADC0, PWM1

33 GPIO_23 I/O GPIO UART1_RTS, ADC1, PWM4

34 RESET_N I System Reset4

35 VDD_WIFI S 3.3V WLAN supply - 36-42 GND S Ground -

43 ANTENNA_1 O Wi-Fi Antenna3 -

47 ANTENNA_2 O Wi-Fi Antenna3 -

Notes: 1. I = Input, O = Output, S = Supply 2. Factory reset is sampled at power-on-reset and available for other purposes thereafter. 3. Wi-Fi Antenna pins are AC-coupled and have a nominal 50 ohms output impedance.

The module Reset pin is connected to the internal MCU via a 1k resistor.

bypass noise which may cause unintended reset.

Connected to SPI serial flash inside the module.

6 Design Guidelines

6.1 Recommended PCB Footprint

All dimensions in Figure 3 are in thousands of an inch unless otherwise marked. Figure 3. AMWx06 Recommended Footprint (Top)

6.2 Routing Recommendations

Figure 4. AMWx06 Keepouts (TOP VIEW)

6.3 Soldering Information

Figure 5 - Recommended solder reflow profile Figure 6 - Example solder reflow profile (AMW006-E03 evaluation board)

6.4 Module Photograph

Figure 7. AMW006 Photograph (Top)

6.5 External Antennas

in-band and out-of-band radiation patterns. undesirable out -of-band radio transmissions.

6.6 Application Examples

(pins 25/29) as shown in Figure 14. Figure 14. Using the AMW006 Module with WiConnect and a UART serial interface

7 Regulatory Certification

The AMW006 module has been certified for operation in various regulatory domains. This section outlines certifi- cation information specific to the following countries and regions:  United States  Canada  Europe  Australia  New Zealand  Japan Should you require regulatory certification for the AMW006 module in a country or region not listed, please contact your local ACKme Networks sales office or create a support request via our website at http://ack.me/contact.

7.1 United States

The ACKme Networks AMW006 module has received Federal Communications Commission (FCC) CFR47 Tele- communications, Part 15 Sub-part C “Intentional Radia- tors” modular approval in accordance with Part 15.212 Modular Transmitter approval. Modular approval allows the end user to integrate the AMW006 module into a fin- ished product without obtaining subsequent and sepa- rate FCC approvals for intentional radiation, provided no changes or modifications are made to the module cir- cuitry. Changes or modifications could void the user’s au- thority to operate the equipment. The end user must comply with all of the instructions provided by the Grantee which indicate installation and/or operating conditions necessary for compliance. The finished product is required to comply with all appli- cable FCC equipment authorization, regulations, require- ments, and equipment functions not associated with the transmitter module portion. For example, compliance must be demonstrated to regulations for other transmit- ter components within the host product; to require- ments for unintentional radiators (Part 15 Sub -part B “Unintentional Radiators”), such as digital devices, com- puter peripherals, radio receivers, etc.; and to additional authorization requirements for non -transmitter fun c- tions on the transmitter module (i.e. Verification, or Dec- laration of Conformity) (e.g., transmitter modules may also contain digital logic functions) as appropriate. Labeling and User Information Requirements The AMW006 module has been labelled with a u nique FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the out- side of the finished product into which the module is in- stalled must also display a label referring to the enclosed module. This exterior label can use wording as follows: The user manual for the product should include the fol- lowing statement: Contains FCC ID: 2ABPY-B5BD9 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause unde- sired operation. This equipment has been tested and found to com - ply with the limits for a Class B digital devi ce, pursu- ant to part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and if not installed and used in ac- cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television re- ception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol- lowing measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equip- ment and receiver.  Connect the equipment into an outlet on a cir- cuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

Regulatory Certification, Section 7 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 17 Additional information on labeling and user information requirements for Part 15 devices can be found in KDB Publication 784748 available at the FCC Office of Engi- neering and Technology (OET) Laboratory Division Knowledge Database (KDB) at the following website: https://apps.fcc.gov/oetcf/kdb/index.cfm RF Exposure All transmitters regulated by FCC must comply with RF exposure requirements. OET Bulletin 65, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields, provides assis- tance in determining whether proposed or existing transmitting facilities, operations or devices comply with limits for human exposure to Radio Frequency (RF) fields adopted by the Federal Communications Commission (FCC). The bulletin offers guidelines and suggestions for evaluating compliance. If appropriate, compliance with exposure guidelines for mobile and unlicensed devices can be accomplished by the use of warning labels and by providing users with in- formation concerning minimum separation distances from transmitting structures and proper installation of antennas. The following statement must be included as a CAUTION statement in manuals and OEM products to alert users of FCC RF exposure compliance: If the AMW006 module is used in a portable application (i.e., the antenna is less than 20 cm from persons during operation), the integrator is responsible for performing Specific Absorption Rate (SAR) testing in accordance with FCC rules 2.1091. Approved External Antenna Types Modular approval testing of the AMW006 was per- formed with the antenna types listed in Table 11 - Tested External Antenna Types. To maintain modular approval in the United States, only the tested antenna types shall be used. It is permissible to use different antenna manufacturers provided the an- tenna types match: in -band and out -of-band radiation patterns and antenna gain must be similar to those tested. Further Information Additional information regarding FCC certification and use of the AMW006 module in the United States is avail- able from the following sources.  Federal Communications Commission (FCC) http://www.fcc.gov.au  FCC Office of Engineering and Technology (OET) La- boratory Division Knowledge Database (KDB) http://apps.fcc.gov/oetcf/kdb/index.cfm

7.2 Canada

The AMW006 module has been certified for use in Can- ada under Industry Canada (IC) Radio Standards Specifi- cation (RSS) RSS-210 and RSSGen. Modular approval per- mits the installation of a module in a host device without the need to recertify the device. Labeling and User Information Requirements Labeling Requirements for the Host Device (from Section 3.2.1, RSS-Gen, Issue 3, December 2010): The host de- vice shall be properly labeled to identify the module within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labeled to dis- play the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording ex- pressing the same meaning, as follows: To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or more should be maintained be- tween the antenna of this device and persons dur- ing operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Contains transmitter module IC: 11685A-61F8D

Regulatory Certification, Section 7 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 18 User Manual Notice for License-Exempt Radio Apparatus (from Section 7.1.3 RSS -Gen, Issue 3, December 2010): User manuals for license -exempt radio apparatus shall contain the following or equivalent notice in a conspicu- ous location in the use r manual or alternatively on the device or both: Transmitter Antenna Notification (f rom Section 7.1.2 RSS-Gen, Issue 3, December 2010): User manuals for transmitters shall display the following notice in a con- spicuous location: The above notice may be affixed to the device instead of displayed in the user manual. User manuals for transmitters equipped with detach - able antennas shall also contain the following notice in a conspicuous location: This device complies with Industry Canada license - exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux onditions suiv antes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appa- reil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en com- promettre le fonctionnement. Under Industry Canada regulations, this radio trans- mitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the trans- mitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotrop- ically radiated power ( EIRP) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Can - ada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infé- rieur) approuvé pour l'émetteur par Industrie Can- ada. Dans le but de réduire les risques de brouil-lage radioélectrique à l'intention des autres utilisa -teurs, il faut choisir le type d'antenne et son gain de sorte que la pui ssance isotrope rayonnée équiva lente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter (identify the device by certifi- cation number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna imp edance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'an- tenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Regulatory Certification, Section 7 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 19 Immediately following the above notice, the manufac- turer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi) and required imped- ance for each. External Antenna Types Modular approval testing of the AMW006 was per- formed with the antenna types listed in Table 11 - Tested External Antenna Types. Transmitter Antenna (from Section 7.1.2 RSS-Gen, Issue 3, December 2010): The AMW006 module can only be sold or operated with antennas with which it was approved. Transmitter may be approved with multiple antenna types. An antenna type comprises antennas having similar in-band and out- of-band radiation patterns. Testing shall be performed using the highest gai n antenna of each combination of transmitter and antenna type for which approval is being sought, with the transmitter output power set at the maximum level. Any antenna of the same type having equal or lesser gain as an antenna that had been success- fully tested with the transmitter, will also be considered approved with the transmitter, and may be used and marketed with the transmitter. When a measurement at the antenna connector is used to determine RF output power, the effective gain of the device's antenna shall be stated, based on measurement or on data from the antenna manufacturer. For transmitters of output power greater than 10 milli- watts, the total antenna gain shall be added to the meas- ured RF output power to demonstrate compliance to the specified radiated power limits. Further Information Additional information may be obtained from the Indus- try Canada website at http://www.ic.gc.ca

7.3 Europe

The AMW006 module is an R&TTE Directive assessed ra- dio module that is CE marked and has been manufac- tured and tested with the intention of being integrated into a final product. The AMW006 module has been tested to R&TTE Direc- tives as summarized in Table 12. European Compliance Testing. Opinion has also been issued. All AMW006 test reports are available on the ACKme Networks website at http://ack.me/contact. The R&TTE Compliance Association provides guidance on modular devices in the document titled Technical Guidance Note 01 available on the website at http://www.rtteca.com/html/download_area.htm. Labeling and User Information Requirements The label on the final product which contains the AMW006 module must follow CE marking requirements. The R&TTE Compliance Association Technical Guidance Note 01 provides guidance on final product CE marking External Antenna Requirements From R&TTE Compliance Association document Tech- nical Guidance Note 01: Provided the integrator installing an assessed radio mod- ule with an integral or specific ant enna and installed in conformance with the radio module manufacturer’s in- stallation instructions requires no further evaluation un- der Article 3.2 of the R&TTE Directive and does not re- quire further involvement of an R&TTE Directive Notified Body for the final product. [Section 2.2.4] The European Compliance Testing listed in Table 12. Eu- ropean Compliance Testing was performed using an- tenna types listed in Table 11 - Tested External Antenna Types. NOTE: To maintain conformance to the testing listed in Table 12. European Compliance Testing, the mod- ule shall be installed in accordance with the installa- tion instructions in this data sheet and shall not be modified. When integrating a radio module into a completed product the integrator becomes the manufacturer of the final product and is therefore responsible for demonstrating compliance of the final produc t with the essential requirements of the R&TTE Directive.

(ERO) at: http://www.ero.dk. Table 12. European Compliance Testing EMF EN 62311:2008 EA560122 Jul 1, 2015 Sporton International, Inc. Jul 5, 2015 TIMCO Engineering, Inc.

7.4 Australia

our website at http://ack.me/contact. listed in Table 11 - Tested External Antenna Types. Australian regulatory requirements.

7.5 New Zealand

listed in Table 11 - Tested External Antenna Types. New Zealand regulatory requirements. ment website at http://www.rsm.govt.nz.

7.6 Japan

Table 13. Japan Compliance Testing VCCI V-3/2014.04 Class B ITE JV560122 Jul 1, 2015 Sporton International, Inc.

Packaging, Handling and Storage, RoHS, Section 8 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 22

8 Packaging, Handling and

Storage, RoHS

8.1 Packaging

Each AMWx06/S module is in dividually packaged in an ESD bag. The bag is NOT compliant with MSL3, and ac- cordingly AMW x06/S modules should NOT be passed through a reflow oven. AMW x06/S modules should be hand-soldered ONLY! If reflow is required, AMWx06/S must be baked first ac- cording to Joint Industry Standard J-STD-033C. AMWx06/R modules are shipped in a reel enclosed in- side a moisture resistant sealed bag. The shelf life of the sealed reel is 12 months at 40°C and <90% Relative Hu- midity (RH). Please refer to the bag seal date and the fol- lowing section for handling & storage.

8.2 Handling & Storage

MSL3 Sensitive Device! The AMW00 6 module is a moisture sensitive device rated at Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC J-STD-20. After opening the moisture sealed storage bag, modules that will be subjected to reflow solder or other high tem- perature processes must be: 1. mounted to a circuit board within 168 hours at factory conditions (≤30°C and <60% RH) OR 2. continuously stored per IPC/JEDEC J-STD-033 Modules that have been exposed to moisture and envi- ronmental conditions exceeding packaging and storage conditions MUST be baked before mounting according to IPC/JEDEC J-STD-033. Failure to meet packaging and storage conditions will re- sult in irreparable damage to modules during solder re- flow.

8.3 RoHS Directive

The AMWx06 module is produced according to the RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) directive and complies with the directive.

Packaging, Handling and Storage, RoHS, Section 8 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 23

8.4 Tape and Reel Specifications

Figure 15 - Tape Specifications Symbol A0 B0 D0 E F K0 Symbol P P0 P2 T W  Tape material : black PS material, in line with ROHS environmental management substances  Tape thickness: 0.3 mm ± 0.05 mm  Tape width: 32mm (1.3")  Protection zone: black PS material  Distance between chain hole centers within the range of ± 0.2 mm of cumulative error  Anti-camber at 1 mm / 250 mm  All dimensions in line with the requirements of EIA-481-D

Packaging, Handling and Storage, RoHS, Section 8 AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ADS-MWx06-106R • Preliminary Data Sheet September 1, 2015 ©2014-2015 ACKme Networks. http://ack.me Page | 24 Figure 16 - Reel Specifications Symbol A B C1 D E H T

9 Ordering Information

The AMWx06 module is available individually or in a bulk reel of 900 units as described in Table 14. Table 14. Ordering Information tire reel is packaged in an ESD and MSL3-rated moisture sensitive bag. tire reel is packaged in an ESD and MSL3-rated moisture sensitive bag.

10.1 Revision History

Table 15: Document Revision History Revision Date Change Description ADS-MW006-100R Oct 20, 2014 Initial preliminary release ADS-MW006-101R Nov 25, 2014 Updated schematic, PCB trace antenna ADS-MW006-102R Mar 20, 2015 Added note on reset pin ADS-MW006-103R Apr 10, 2015 Added note on MLS3 non-compliance, and note on power consumption ADS-MW006-104R May 5, 2015 Added solder reflow charts, AMW106 properties ADS-MW006-105R Jun 9, 2015 Removed AMW106 properties; updated GPIO and ADC details ADS-MWx06-106R Sep 1, 2015 Added AMW106 Updated/added ETSI/CE v1.9.1 and Japan certification Added tape and reel specifications.

10.2 Glossary

In most cases, acronyms and abbreviations are defined on first use. A comprehensive list of acronyms and other terms used in ACKme Networks documents are provided on the ACKme Networks website at https://www.ack.me/FAQs/Glossary_of_Terms.

11 References

Throughout this data sheet, referen ces to other docu- ments are listed. The following documents provide addi- tional material: 1. IEEE 802.11 Standard – 2012 Institute of Electrical and Electronics Engineers. http://standards.ieee.org

AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions ACKme reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by ACKme is believed to be accurate and reliable. However, ACKme does not assume any liability aris ing out of the application or use of this information, nor the application or use of any product described herein, neither does it convey any license under its patent rights nor the rights of others. ACKme Networks US Headquarters:

20 North Santa Cruz Ave

Selected Specification

List of Unclassifed Man... AMW006 overview.

Change manufacturer

Overview

AMW006 is listed in the IC category. Available datasheets include documents from Silicon Laboratories. DigiCamel provides a local PDF and searchable HTML technical text for online reference.

Summary

Embedded Wi-Fi Networking Solutions

Description

Embedded Wi-Fi Networking Solutions

Source title AMW006 Datasheet(PDF) - List of Unclassifed Manufacturers

Related Parts

More parts from the same family.

Browse manufacturer