AMG88X543

Datasheet search site

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 10

Technical content

• Temperature detection of two-dimensional area: 8 × 8 (64 pixels)
• Digital output (capability of temperature value output)
• Compact SMD package (adaptively to reflow mounting)
• RoHS compliant
• Energy saving at office (air-conditioning/lighting control)
• Automatic doors/elevators Product name (Vertical 8 × Horizontal 8 Matrix) 3.3 V Number of pixel Tape and reel package (pcs) AMG885543 AMG883543 Part number 5.0 V 3.3 V Operating voltage 1000 8 8 pixels 8 8 pixels 3 Fixed value 5 5.0 V Infrared array sensor Grid-EYE Types 543 Infrared Array Sensor Grid-EYE Surface Mount Type AMG88x543 (Wide angle type) Vertical pixel Code Horizontal pixel Code Power supply voltage Feature Code Code Recommended applications

Ordering information

Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-Aug-22 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Absolute maximum ratings Terminal −0.3 V to 6.5 V VDD −0.3 V to VDD +0.3 V SCL, SDA, AD_SELECT ± 1 kV All terminals ± 200 V All terminals Static electricity (Human Body Model) Static electricity (Machine Model) Rating Item Applied voltage Input/Output voltage Output sink current Applied voltage Temperature range of measuring object Operating temperature range Storage temperature range 0 ℃ to 80 ℃ +32 ℉ to +176 ℉ 0 ℃ to 80 ℃ +32 ℉ to +176 ℉ -20 ℃ to 80 ℃ -4 ℉ to +176 ℉ 3.3 V ± 0.3 V or 5.0 V ± 0.5 V Item Performance −10 mA to 10 mA INT, SDA Absolute maximum ratings NEW AMG 8 8 3 543

AMG88x543 (Wide angle type) *1: Temperature output after starting in normal mode and waiting longer than setup time. *2: The measurement conditions for guaranteed characteristic are as follows. ・ Measurement equipment : inspection equipment in our manufacturing process ・ Operation temperature : standard temperature (Around 20℃) ・ Ambient humidity : standard humidity (Around 65%RH) ・ Measurement object and temperature : black body, 25℃, 50℃, 75℃ ・ Frame rate : 10fps ・ Moving average : setting off ・ Average value of multiple frame outputs is measurement value *3: Within Typ. ±2.5℃ means that the average of all 64 pixels measurement value is within ±2.5℃. NETD *4 1fps:Typ.0.09℃ 10fps:Typ.0.27℃ Thermistor output resolution Typ. 50 ms（Time to enable communication after setup） Typ. 15 s（Time to stabilize output after setup） Temperature output No moving average or Twice moving average 0.25 ℃ 0.45 ℉ Within Typ. ± 2.5 ℃ ±4.5 ℉ *3 Typ. 90 ° Within Typ. ±10 ° Typ. 4.5 mA（Normal mode） Typ. 0.2 mA（Sleep mode） Characteristics Performance 64 (Vertical 8 × Horizontal 8 Matrix) I2C Typ. 1 fps or Typ. 10 fps External interface Performance Setup time Viewing angle Temperature accuracy *1 *2 Number of pixel Item Item Optical axis gap Current consumption Performance Should a safety concern arise regarding this product, please be sure to contact us immediately. Frame rate Output mode Calculate mode Temperature output resolution Number of sensor address Thermistor output temperature range −20 ℃ to 80 ℃ –4 ℉ to +176 ℉ Operating mode Normal (Detection on) Sleep (Detection off) Internal circuit 10-Aug-22 0.0625 ℃ 0.1125 ℉ 2（I2C slave address)） Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Sensor element Selector Gain amp GND VDD Thermistor ADC Control ROM I2C I/F SDA SCL INT AD SELECT

AMG88x543 (Wide angle type) (1) Pixel array (2) Viewing angle (Typ.) Pixel array from 1 to 64 is shown below. Sensor viewing angle is shown below. (1) Each pixel’s viewing central angle (Typ.) (2) Each pixel’s viewing angle (Typ.) Sensor viewing angle is shown below. External dimensions (Typ.) Recommended PC board pad (Typ.) Note）NC：Leave terminal unconnected. Unit : mm inch Optical properties Pixel array and viewing angle Dimensions 10-Aug-22Should a safety concern arise regarding this product, please be sure to contact us immediately. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. VPP NC Number AVDD-PC NC DVDD-PC Terminal name NC VDD Number Terminal name ① NC ② SDA ⑥ GND ⑦ NC ③ SCL ④ INT ⑤ AD_SELECT -60 -50 -40 -30 -20 -10 -60 -40 -20 0 20 40 60 1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 Horizontal viewing angle Typ. 90° Vertical viewing angle Typ. 90° Vertical viewing central angle (°) Horizontal viewing central angle(°) Each pixel’s horizontall viewing angle (°) Pixel number Each pixel’s vertical viewing angle (°) Pixel number 11.0 0.433 P1.27x4=5.08 P0.050x4=0.200 3.6 0.142 (0.75) (0.030) 10-0.7 10-0.028 3.5 0.138 8.7 0.343 4-0.8 4-0.031 *Four corners

2.0 Lens

4.83 Lot No. Part No. (Last 4 digit) 8.9 8.0 11.6 ⑭ ⑧ 3.78 1.5 7.8 3.013-2.0 14-0.5 P1.27x4 10.9 ① ⑦ 4.45 4.76 4.83 ø1.74 0.079 0.315 0.187 0.175 0.149 0.059 0.350 ø0.069 0.457 0.11813- 0.079 0.429 0.307 P0.050x4 14-0.020 0.190 0.190 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01

AMG88x543 (Wide angle type) (1) In case of setting I2C slave address of the sensor 1101000 ※ Connect terminal 5 (AD_SELECT) to GND. (2) In case of setting I2C slave address of the sensor 1101001 ※ Connect terminal 5 (AD_SELECT) to VDD. ・ This circuit is an example to drive Infrared Array Sensor “Grid-EYE”, so that our company will not take any responsibility of loss which is due to this circuit. ・ The wiring connected to VDD are same electrical potential (same supply voltage). ・ If there is a difference of electric potential between the terminals, it can be cause of breakdown. ・ Connect wiring to solid GND with wide and short pattern on PCB. ・ If wiring pattern is designed thin and long, temperature accuracy will be degraded. Tape dimensions (Typ.) Dimensions of tape reel (Typ.) Unit : mm inch Should a safety concern arise regarding this product, please be sure to contact us immediately. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. External circuit Packing format (Tape and reel) 10-Aug-22 ø13 ø0.512 Top cover tape Embossed carrier tape 21.5 0.84617.5 0.689 ø80.0 ø3.15 ø380.0 ø14.961 Direction of picking 16.0 1.75 0.3 ø1.5 8.85 5.1 4.0 16.0 2.0 12.45 0.630 0.069 0.014 ø0.059 0.630 0.1570.079 0.201 0.348 0.490 To microcomputer etc. To microcomputer etc. To microcomputer etc. 10 kΩ ②SDA ④INT ⑤AD SELECT ⑥GND ⑬VPP ⑫DVDD-PC ⑩AVDD-PC ⑨VDD 10 μF±20% 1 μF±10% GND ③SCL VDD 20 Ω±5% 10 kΩ 10 kΩ 10 kΩ 1.5 to 2.7 μF ②SDA 10 kΩ ③SCL ④INT ⑤AD SELECT ⑥GND ⑬VPP ⑫DVDD-PC ⑩AVDD-PC ⑨VDD 10 μF±20% 1.5 to 2.7 μF 1 μF±10% 20 Ω±5% GND VDD 10 kΩ 10 kΩ To microcomputer etc. To microcomputer etc. To microcomputer etc.

■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations>

• Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident.
• Before connecting a connector, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., and make sure that the connector is connected properly. Take note that mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry.
• Do not use any motion sensor which has been disassembled or remodeled.
• Protection circuit recommended. The possible failure mode is either open or short of the output transistor. An excess heat is the cause for short mode failure. For any important and serious application in terms of safety, add protection circuit or any other protection method. ・ Various safety equipment and safety equipment ・ Traffic light ・ Security crime prevention equipment ・ Equipment concerning control and safety of trains, cars, etc. ・ Applications such as temperature control using sensor output etc. (Grid-EYE)
• If it is expected that malfunction of each sensor may cause injury to persons or serious expansion damage, be sure to implement safety measures such as double safety circuit. The products and specifications listed in this document are subject to change for product improvement, etc. (including specification changes and discontinued manufacturing). When examining mass-production design or placing an order for the listed products, please contact Panasonic to make sure that the information listed in this document is up-to-date.
• If it is expected that malfunction of each sensor may cause injury to persons or serious expansion damage, be sure to implement safety me Reference standards : Computers, office automation equipment, communications equipment, audio-video products, home electrical appliances, machine tools, personal devices, industrial robots. Special standards : Transportation equipment (automobiles, trains, ships, etc.), traffic signal equipment, crime and disaster prevention devices, electric power equipment, various safety devices, and medical equipment not directly targeted for life support. Specified standards : Aircraft equipment, aeronautical and space equipment, seabed relay equipment, nuclear power control systems, and medical equipment, devices and systems for life support.
• Before considering the use of our products under the following conditions, you must contact one of our customer service representatives without fail and exchange written specifications. ・ When our products are to be used in any of the applications listed for the Special Standards or Specified Standards. ・ When, even for any of the applications listed for the Reference Standards, our products may possibly be used beyond the range of the specifications, environment or conditions listed in the document or when you are considering the use of our products in any conditions or an environment that is not listed in the document. [Acceptance Inspection] For a purchased or delivered product, please conduct an acceptance inspection promptly with adequate consideration given to the management and maintenance of the product before and during the acceptance inspection. [Warranty Period] The warranty period of these products is one year after the purchase or delivery to a location designated by your company, unless otherwise specified by both parties. [Scope of Warranty] If a failure or a defect attributable to Panasonic is found during the warranty period, we will promptly provide a replacement or a necessary replacement part or change/repair the defective part free of charge at the location of the purchase or delivery. The warranty does not cover a failure or a defect when any of the following applies : (1) Caused by specifications, standards, or handling methods, etc. designated by your company. (2) Caused by modification of the structure, capabilities, or specifications, etc., in which Panasonic is not engaged, carried out after the purchase or delivery. (3) Caused by an unforeseen phenomenon that cannot be predicted with the technologies available after the time of the purchase or at the time of concluding the agreement. (4) When the product was used outside the scope of the conditions/environments described in the catalog or specifications. (5) When the product is incorporated in your company's equipment for use, damages that could be avoided if your company's equipment had industry-standard functions, structures, etc. (6) Caused by natural disasters or Force Majeure. The warranty described here is limited to the purchased or delivered product only and does not cover any consequential damages arising from the failure or defect of the product. [Before Purchase]
• The standard prices of the products listed in this catalog do not include consumption tax, delivery, installation & adjustment fees, used product collection fees, etc.
• The specifications/appearance are subject to change without notice for product improvement.
• The export of products that fall into the category of strategic goods (or services) require an export (or a service transaction) license under the Foreign Exchange and Foreign Trade Law. Please contact Panasonic for details.
• For details of the products listed in this catalog, please contact distributors, specialty contractor stores, or Panasonic. 31-Mar-20 Safety precautions Request for ordering and use

Infrared Array Sensor Grid-EYE ■ Head the following precautions to prevent injury or accidents. (1) We take no responsibility for troubles caused by the product usage that is not specified in this specification. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. (2) Before connecting a connector, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., and make sure that the connector is connected properly. Take note that mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. (3) If the module heats up abnormally or smells abnormal, stop using it immediately by turning off the main power supply of the device etc. (4) The fact remains that electrical components and devices generally cause failures at probability. Furthermore, their durability varies with use environments or use conditions. In this respect, we ask you to check for actual electrical components and devices under actual conditions before use without fail. (5) Failure modes of sensors include short-circuiting, open-circuiting and temperature rises. If the failure of the product is considered to cause a personal injury or death or property damage, the safety rate should be added to the specified values shown in this specifications and please consider the fail-safe design in the following considerations and ensure safety. ・ Provide protection circuits and protection devices to ensure system safety. ・ Provide of a redundant circuit so that a malfunction does not make the system unsafety. (6) When a dogma shall be occurred about safety for this product, be sure to inform us rapidly, operate your technical examination. Infrared Array Sensor is a thermopile type infrared sensor which detects the amount of infrared rays. Below conditions generally degrade the temperature accuracy. Carefully check the performance and stability under actual use conditions, and perform temperature corrections when necessary. (1) When heating elements exist near the mounting position of the sensor. (2) When the sensor is exposed to cold or hot air. (3) When the temperature of the sensor body rapidly changes. (4) When substances (e.g., glasses, acrylics or steams), which hardly transmit a far infrared ray, exist between the sensor and the detected object. (5) When substances (e.g., foreign substances or water), which hardly transmit a far infrared ray, adhere to the lense of the sensor. (1) Temperature: See the specifications (2) Humidity: 15 % to 85 % R.H. (Avoid freezing and dew condensation) (3) Atmospheric pressure: 86 to 106 kPa (4) Vibrations and shocks may damage the sensor, and cause malfunction and performance deterioration. If loads and shocks are applied on the lense, the damaged sensor may cause malfunction and performance deterioration. (5) The product is not water/splash-proof. Perform water/dust-proofing and dew condensation / freezing countermeasures in accordance with use environment. When dew condensation occurs, responsiveness of heat source detection may delay for several seconds. Be careful to solder migration caused by adhesion of water droplets on solder parts. (6) Avoid use and storage in the corrosive gas (organic solvent, sulfurous acid and hydrogen sulfide gases) to avoid malfunction and performance deterioration. (7) Use surge absorbers as applying the external surge voltage may damage the internal circuit. (8) Malfunction may occur near electric noises from static electricity, lightning, broadcast or amateur radio stations and mobile phones. (9) The sensor can continuously operate within the range of using ambient temperature (using ambient humidity). However, ensure that humidity is within the range described in the following page as humidity varies according to temperature. Avoid the continuous operation near the operational limit. The temperature range does not guarantee the durability. Precaution for fundamental structure of sensor Use environment 16-Sep-22 Safety precautions Temperature (℃ ℉) －20 0 80 Avoid freezing at 0 ℃ 32 ℉ or below Avoid dew condensation at 0 ℃ 32 ℉ or below Tolerance range Humidity (%RH)

Infrared Array Sensor Grid-EYE Use the land of the printed-circuit board on which the sensor is securely fixed. The recommended printed-circuit board is FR4 (thickness 1.6 mm 0.063 inch). When mounting on the deprecated circuit board, carefully check the performance and quality under actual use conditions before use. (1) A large noise on the power supply may cause malfunction. Place the recommended capacitor near the sensor (within 20 mm 0.787 inch of the wiring pattern length) between sensor input terminals (VDD-GND) to secure power superimposed noise resistance. Test with the actual machine and reselect the capacitor with optimal capacitance. (2) Prevent the metal part of other electronic components from contacting with the sensor body as the upper face (where part numbers are imprinted) of the sensor is GND. Due to the thermal capacity of the infrared array sensor is low, therefore, take steps to minimize the effects of external heat. Damage and changes to characteristics may occur due to heat deformation. (1) Manual soldering Set the soldering tip from 350 to 400 ℃ (30 - 60 W), and solder within 3 seconds or less. Note that output may be changed if the load is applied to the terminals when the soldering carefully clean the tip of soldering iron. (2) Reflow soldering ・ Solder coating We recommend the screen solder printing method as the method of cream. Halogen type (Chlorine type, Bromine type , etc.) or other high-activity flux is not recommended as the residue may affect performance or reliability of resistors. ・ Mounting of sensor Self alignment may not always work as expected, therefore, be carefully the position of the terminals and pattern. ・ The recommended reflow temperature profile The recommended reflow temperature profile conditions are given below. The temperature of the profile is assumed to be a value measured with the printed wiring board of the product terminal neighborhood. The temperature of PCB near this product terminal at the time of mounting changes depending on PCB design. Therefore, please confirm the temperature of PCB near this product terminal to become the specified temperature profile when this product be mounted on the PCB. (3) Solder reworking Finish reworking in one operation for reworking of the solder bridge, use a soldering iron with a flat tip do not add more flux when reworking Refer the conditions of manual soldering to rework. (4) Coating of PCB To prevent the insulation of the PC board after soldering, not to place the chemicals on lens of the sensor when coating. (5) Dividing of PCB When you cut, fold, or fix with screw the PCB after mounting the sensor, not to stress to the sensor and the soldered parts. (6) Structure of sensor terminals The sensor terminals are designed to be exposed, so contact of the terminals with metal shards and the like will cause output errors. Therefore, be careful not to touch the terminals with the metal piece or the hand. (7) Both-side soldering When you do the reflow solder to the back of the PC board after the reflow of the sensor, execute fixed processing, or instance, with the adhesive etc. (8) When handling this product, do not touch it with bare hands. Please wear gloves. Correctly wire as in the connection diagram. Reverse connection may damage the product and degrade the performance. Do not use empty terminals. Such use may damage the sensor. For cable wiring, use shield wires with possibly short wiring lengths to prevent the influence of the noise. If the dirt or water droplets is attached to the lens, wipe it with soft cloth. The lens is damaged when strongly rubbed, and causes the characteristic deterioration. Avoid ultrasonic cleaning since this may cause breaks or disconnections in the wiring. 16-Sep-22 Mounting Soldering Wire connection Cleaning T1＝150 to 180 ℃ 302 ℉ to 356 ℉ T2＝230 ℃ 446 °F T3＝Below 250 ℃ 482 ℉ t1＝60 to 120 s t2t1

Infrared Array Sensor Grid-EYE (1) Extreme vibration and shock during transport will damage the sensor. Handle the outer box and reel with care. (2) Storage under extreme conditions will cause soldering degradation, external appearance defects, and characteristic deterioration. The following storage conditions are recommended. Temperature：0 ℃ to 45 ℃ 32 ℉ to 113 ℉ Humidity：70 %RH Others：Not storage in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and NOx, minimal dust. Not storage in places exposed to direct sunlight. (3) The sensors are sensitive to moisture and come in moisture-proof packages. Observe the following cautions when storing. ・ After the moisture-proof package is unsealed, take the sensors out of storage as soon as possible (within 1 week, less than 30 ℃, less than 60 %R.H.,) ・ If the sensors are to be left in storage for a considerable period after the moisture-proof package has been unsealed, keep them in another moisture-proof bag containing silica gel (within 3 months at the most). (4) When using the product stored for a long time, dry the package before reflow work. ・ When mounting with solder, if thermal stress is applied to sensors that have absorbed moisture, the moisture will vaporize, swelling will occur, and the inside of the package will become stressed. This may cause the package surface to blister or crack. Therefore, take caution and observe the soldering conditions. (5) When using the product stored for a long time, dry the pacage before reflow work. Baking condition When mounting with solder, if thermal stress is applied to sensors that have absorbed moisture, the moisture will vaporize, swelling will occur, and the inside of the package will become stressd. This may cause the package surface to blister or crack. (1) To assure reliability, check the sensor under actual loading conditions. Avoid any situation that may adversely affect its performance. (2) This product may malfunction if dropped on its own before it is installed. Do not use if this happens. (3) If the sensor get high frequency vibration, it can be cause of breakdown. When the product get impulse like below, do not use it. ・ Touch to a object made of metal ・ Touch of mutual sensors (4) Since static charge can damage the sensor, bear in mind the following handling precautions. ・ Plastic containers should not be used to store or transport the sensors since they readily become charged. ・ Store or transport the product in an environment that hinders the occurrence of static electricity (for example, places with 45 % to 60 % humidity) and protect the product using electrically conductive packaging. ・ Implement static electricity prevention measures once the product packaging has been opened. (5) Do not use this product which has been disassembled or remodeled. (6) Do not reuse this product after removal from the mounting board. 16-Sep-22 Transportation and storage Other handling cautions Temperature Packaged status Time Cycle 65℃±5℃ Taping packing 48 to 60 hours 1 time

Infrared Array Sensor Grid-EYE Although the best attention will be paid for the quality controls of the products, consider the followings contents. (1) This product is designed to use in general applications at general electric equipment (Household electric appliances, AV products, office equipment, information and equipment, etc.). This product is not an important safety product. This product is not equipped with fail proof/fault diagnosis functions. If there is possibilities to occur failure or malfunction of this product which may cause unsafe event such as (a)～(d) and damage to personnel’s life, body and property, we will be not responsible for any loss or damage caused by the use of products. (a) Fire accident（Fire, smoke） (b) Electrocution（Electric shock） (c) Damages（Fall down/Explosion/Poisoning） (d) Fire/electrocution/damages at life end (2) This specification shows the quality and performance of a unit component. Before adoption, be sure to evaluate and verify the product mounting it in your product. (3) Unless otherwise stipulated by both parties, the warranty period of our products is one year after their purchase by you or after their delivery to the location specified by you. (4) In the event that we are found to blame for any failures or defects in our products during the warranty period, we will provide replacements or supply the necessary spare parts or replace and/or repair the defective sections free of charge and with all due speed at the location where the products concerned were purchased or delivered. However, the following failures and defects are not covered by the warranty: ・ When the failure or defect was caused by a specification, standard, handling method, etc. which was specified by you. ・ When the failure or defect was caused after purchase by you or delivery to your premises by an alteration in construction, performance, specification, etc. which did not involve us. ・ The case that the product condition changed by handling, storage and / or transportation after delivery. ・ When the failure or defect was caused by a phenomenon that could not be predicted by the technology that was being applied in practice either after purchase by you or at the time when the contract was signed. ・ When the use of our products deviated from the scope of the conditions and environment set forth in the specifications. ・ When, after our products were incorporated into your products or equipment for use, damage resulted which could have been avoided if your products or equipment had been equipped with the functions, construction, etc. the provision of which is accepted practice in the industry. ・When the failure or defect was caused by a natural disaster or other force majeure. The terms and conditions of the warranty here set forth apply solely to the warranty of the discrete products which were purchased by you or delivered to your premises, and they do not cover any damage induced by their failure or defects. (5) The products and specifications described in this document are subject to change (including specification changes and production suspension) due to product improvements. When considering a using a new products, please contact our sales office to confirm that the information in this specifications is up-to-date. (6) In connection with the products you have purchased from us or with the products delivered to your premises, we ask that you perform an acceptance inspection with all due speed and, in connection with the handling of our products both before and during the acceptance inspection, we ask that you give full consideration to the control and preservation of our products. (7) As to the disposal of the product, check the method of disposal in each country or region where the product are incorporated in your products to be used. (8) The technical information in this specification provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. Special remarks 16-Sep-22