DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

  • Wireless application - WiMax bands.
  • User Equipments (UE), e.g. dongles, modems
  • User Equipments applications covering 2710MHz WiMax bands.
  • Alternative to larger PCB solution FEATURES: APPLICATIONS: Surface Mount WLAN Antenna (2710MHz)

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 10.28.13Visit www.abracon.com for Terms & Conditions of SaleABRACON IS CERTIFIED ABRACON IS ISO9001:2008 CERTIFIED Pb 5.2 x 2.1 x 1.0mm

  • 2710MHz, Bandwidth ≥200MHz
  • Suitable for RoHS compliant reflow
  • Gain 2.5dBi (Peak) / 0.5dBi (Average)
  • VSWR <2:1
  • Non Ground Mounting type.
  • Power Handling 3W Max
  • Matched to 50 Ohm STANDARD SPECIFICATIONS RoHS / RoHS II Compliant Moisture Sensitivity Level (MSL) – MSL = 1 PART IDENTIFICATION: Maximum Ratings

Electrical Characteristics

Bandwidth ≥200MHz Peak Gain 2.5 dBi typ. Average Gain 0.5 dBi typ VSWR <2:1 Impedance 50 Ohm Power Capability 3W max Item Value Operating Temperature Range -40ºC to + 85ºC Storage Temperature Range -10ºC ~ +40 and RH ºC 70% (Max.) AMCA52-2R7100G-S1F-T Packaging Blank: Bulk or Cut Tape T: T/R 1000pcs per reel T4 : T/R 4000pcs per reel

tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 10.28.13Visit www.abracon.com for Terms & Conditions of SaleABRACON IS CERTIFIED ABRACON IS ISO9001:2008 CERTIFIED Pb 5.2 x 2.1 x 1.0mm RoHS / RoHS II Compliant OUTLINE DIMENSIONS: REFLOW PROFILE: Surface Mount WLAN Antenna (2710MHz) (Dimensions: mm) Recommended Land Pattern

  • Preheat condition: 150 ~200 /60~120ºC sec.
  • Allowed time above 217ºC: 60~90sec.
  • Max temp: 260ºC
  • Max time at max temp: 10sec.
  • Solder paste: Sn/3.0Ag/0.5Cu
  • Allowed Reflow time: 2x max [Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and process, and should not exceed the parameters as the Reflow profile shows.] Pre-heating Temperature: 120ºC, 60 ºC ~ 300 sec.
  • Iron soldering power: Max.30W.
  • Pre-heating: 150 / 60 sec. ºC.
  • Soldering Tip temperature: 350 Max. ºC.
  • Soldering time: 3 sec Max.
  • Solder paste: Sn/3.0Ag/0.5Cu.
  • Max 1 times for iron soldering.
  • Soldering Temperature: 340ºC±5ºC, 5sec max per each terminal. [Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.] MANUAL SOLDERING Series A B C D E F G H I

tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 10.28.13Visit www.abracon.com for Terms & Conditions of SaleABRACON IS CERTIFIED ABRACON IS ISO9001:2008 CERTIFIED Pb 5.2 x 2.1 x 1.0mm RoHS / RoHS II Compliant TAPE & REEL: Packaging: 1000 or 4000 Units per reel, please specify when ordering. 1000pcs MOQ. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. (Dimensions: mm) Surface Mount WLAN Antenna (2710MHz) Note: The sprocket holes are to the right as the tape is pulled toward the user. Reel Dimensions Mounting Direction of Tape on Reel Type Spec Dimensions (mm) A W C B 0.0 E 1.75±0.10 K0 1.20±0.10 F 5.50±0.15 A0 2.35±0.10