AM-AMC-145 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
/G6e2.5 dB Typical Midband Noise Figure /G6e+19 dBm Typical Midband Output Power /G6e+37 dBm Typical Midband Third Order Intercept
Description
M/A-COM’s AM-145 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-145 are ideally suited for use where a high intercept, high reliability amplifier is required. High Performance Amplifier, 11 dB Gain, 10 - 1000 MHz AM-/AMC-145 TO-8-1 C-32 Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum Max. Input Power +10 dBm Vbias +15.75 V Operating Temperature -55°C to +85°C Storage Temperature -65°C to +125°C V 3.00
High Performance Amplifier, 11 dB Gain, 10 - 1000 MHz AM-/AMC-145 Specifications subject to change without notice. /G6e North America: Tel. (800) 366-2266 /G6e Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 /G6e Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.00 Electrical Specifications 2,3 TA = -55°C to +85°C Case Temperature Parameter Test Conditions Frequency Units Min. Typ. Max. Gain @ +25°C 300 MHz dB 10.1 10.7 11.3 Frequency Response — 10-1000 MHz dB — — ±1.0 Gain Variation with Temperature 1 dB Compression Output Power 10-1000 MHz 100-1000 MHz dBm dBm +14 +17 Noise Figure — 10-1000 MHz 10-500 MHz dB dB 5.5 4.0 Reverse Transmission — 10-1000 MHz dB — -13.5 -11.0 VSWR — 10-1000 MHz 10-500 MHz Ratio Ratio 3:1 2:1 Output IP2 Two-tone inputs up to +5 dBm 10-1000 MHz dBm +38 — — Output IP3 Two-tone inputs up to +5 dBm 10-1000 MHz dBm +26 — — Vbias — — VDC +14.5 +15.0 +15.5 Ibias Vbias = +15.0 VDC — mA — 50 60 Power Dissipation @15.0 V Bias — mW — 750 — S-Parameter Data 2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance. 3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 0.8W must be provided in use. S11 S21 S12 S22 MAG ANG MAG ANG MAG ANG MAG ANG Frequency (MHz)
High Performance Amplifier, 11 dB Gain, 10 - 1000 MHz AM-/AMC-145 Specifications subject to change without notice. /G6e North America: Tel. (800) 366-2266 /G6e Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 /G6e Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.00 Typical Performance Curves Noise Figure 1 dB Compression Intermodulation Intercept Gain vs. Frequency VSWR vs. Frequency
Ordering Information
- Mounting kit part number AU00071 required for PCB applications. 10 20 50 100 300 500 700 900 1100 1300 Frequency (MHz) Output Power (dBm) 1.0 1.5 2.0 2.5 3.0 10 20 50 100 300 500 700 900 1100 1300 Frequency (MHz) VSWR RF IN RF OUT 10 20 50 100 300 500 700 900 1100 1300 Frequency (MHz) Noise Figure (dB) +85°C +25°C 10 20 50 100 300 500 700 900 1100 1300 Frequency (MHz) Intercept (dBm) IP2 (f1+f2) IP2 (f1-f2) IP3 10 20 50 100 300 500 700 900 1100 1300 Frequency (MHz) Gain (dB) +85°C +25°C -55°C