AM-AMC-119 MACOM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

n 2.3 dB Typical Midband Noise Figure n +23 dBm Typical Midband Output Power n +40 dBm Typical Midband Third Order Intercept

Description

M/A-COM’s AM-119 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO -8 package. Due to the internal power dissipation the thermal rise minimized. The ground plane on the PC board should be configured to remove h eat from under the package. AM-119 is ideally suited for use where a high intercept, high reliability amplifier is required. High Performance Amplifier, 8 dB Gain, 30 - 250 MHz AM-/AMC-119 TO-8-1 Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum Max Input Power +13 dBm Vbias +15.75 V Operating Temperature -55°C to +85°C Storage Temperature -65°C to +125°C V 3.00 C-32

High Performance Amplifier, 8 dB Gain, 30 - 250 MHz AM-/AMC-119 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.00 Electrical Specifications 2,3 TA = -55°C to +85°C Case Temperature Parameter Test Conditions Frequency Units Min. Typ. Max. Gain @ +25°C 250 MHz dB 7.5 8.0 8.5 Frequency Response — 30 - 250 MHz dB — — ±0.75 Gain Variation with Temperature — 30 - 250 MHz dB — — ±1.0 1 dB Compression Output Power 30 - 250 MHz dBm +20 — — Noise Figure — 30 - 250 MHz dB — — 3.5 Reverse Transmission — 30 - 250 MHz dB — -11.0 -9.5 VSWR — 30 - 250 MHz Ratio — — 2.3:1 Output IP2 Two-tone inputs up to +10 dBm 30 - 250 MHz dBm +39 — Output IP3 Two-tone inputs up to +10 dBm 30 - 250 MHz dBm +34 — — Vbias — — VDC +14.5 +15.0 +15.5 Ibias Vbias = +15.0 VDC — mA — 50 60 Power Dissipation @ +15V Bias — mW — 750 — 2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance. 3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1W must be provided in use.

High Performance Amplifier, 8 dB Gain, 30 - 250 MHz AM-/AMC-119 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.00 Typical Performance Curves Noise Figure

Ordering Information

  1. Mounting kit part number AU00071 required for PCB applications. Part Number Package AM-119 PIN 4 TO-8-1 AMC-119 SMA Connectorized 1 dB Compression Intermodulation Intercept Gain vs. Frequency VSWR vs. Frequency 1.0 1.5 2.0 2.5 30 50 100 150 200 250 300 Frequency (MHz) VSWR RF IN RF OUT 30 50 100 150 200 250 300 Frequency (MHz) Noise Figure (dB) +85°C +25°C 30 50 100 150 200 250 300 Frequency (MHz) Intercept (dBm) IP2 (f1+f2) IP3 IP2 (f1-f2) 30 50 100 150 200 250 300 Frequency (MHz) Output Power (dBm) 30 50 100 150 200 250 300 Frequency (MHz) Gain (dB) +85°C +25°C -55°C