AM4457P3C KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

z Mechanically and spectrally matched to infrared emitting LED lamp. z RoHS compliant.

Description

Made with NPN silicon phototransistor chips. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

SPEC NO: DSAC7646 REV NO: V.6 DATE: JUN/03/2016 PAGE: 2 OF 4 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202001801 Electrical / Optical Characteristics at TA=25°C Absolute Maximum Ratings at TA=25°C Symbol Parameter Min. Typ. Max. Units Test Conditions VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100uA Ee=0mW/c ㎡ VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100uA Ee=0mW/c ㎡ VCE (SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA Ee=20mW/c ㎡ I CEO Collector Dark Current 100 nA VCE=10V Ee=0mW/c ㎡ TR Rise Time (10% to 90% ) 15 us VCE = 5V IC=1mA RL=1000Ω TF Fall Time (90% to 10% ) 15 us I (ON) On State Collector Current 0.35 0.8 mA VCE = 5V Ee=1mW/c ㎡ λ=940nm Parameter Max.Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature 100mW Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Lead Soldering Temperature (>5mm for 5sec) 260°C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

SPEC NO: DSAC7646 REV NO: V.6 DATE: JUN/03/2016 PAGE: 3 OF 4 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202001801

SPEC NO: DSAC7646 REV NO: V.6 DATE: JUN/03/2016 PAGE: 4 OF 4 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1202001801 PACKING & LABEL SPECIFICATIONS AM4457P3C Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes