AM2520SEC09 KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
/G4FSUBMINIATURE PACKAGE. /G4FWIDE VIEWING ANGLE. /G4FZ-BEND LEAD. /G4FLONG LIFE -SOLID STATE RELIABILITY. /G4FLOW PACKAGE PROFILE. /G4FPACKAGE : 1000PCS / REEL. /G4FRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0 .25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice.
Description
The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip.
SPEC NO: DSAD1284 REV NO: V.3 DATE: APR/O6/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1202000610 Selection Guide N ote: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ 1/2 AM2520SEC09 20°SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 480 1300 Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA λD Dominant Wavelength Super Bright Orange 601 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1284 REV NO: V.3 DATE: APR/O6/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1202000610 Super Bright Orange AM2520SEC09
SPEC NO: DSAD1284 REV NO: V.3 DATE: APR/O6/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1202000610 AM2520SEC09 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.