ALQ15 ASTEC

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram

60 Watts

ALQ15-Dual

PDF page 1 diagram

Electrical Specs

Electrical Specs

Input

Input Range Input Surge Efficiency2

Output

Line / Load Regulation Load Current

Noise/Ripple1 Transient Response

  • Industry standard Dual O/p 1/4 Brick Footprint
  • Open Frame Construction
  • Low Ripple and Noise1 < 30mVPK-PK

Over Voltage Protection

  • Regulation to zero load

Over Current Protection

  • High Capacitive Load start-up
  • Fixed Frequency Switching for EMI predictability

Over Temperature

  • Industry Standard features: OVP, OCP, OTP,

Protection

Input UVLO, Enable, Trim

Switching Frequency

  • Input Under Voltage Lockout with hysteresis

Isolation Voltage

  • Output Voltage Adjustability
  • Meets Basic Insulation

Control

Voltage Adjust

Environmental

Enable

Operating Ambient Temperature -40°C to +85°C Storage temperature: -55°C to +125°C MTBF: > 1 Million Hrs

Safety

UL, cUL 60950 Recognized TUV EN60950 Licensed CB Test Ceritifcate

North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211

36 to 75 VDC 100V /100ms 5.0V/3.3V @ 89.5% (typ at 60W) 3.3V/2.5V @ 87.7% 3.3V/1.8V @ 86.5% 2.5V/1.5V @ 84.0%

< 1% Vo 15A max per channel (60W max) 12A max for 5V rail 30mVPK-PK 2% Vo deviation (typ) (50% to 75% Step Load) < 300µs settling time (typ) 130% Vo Typ (latching) 130% IO,max Typ (autorecovery) 115ºC average PCB temperature (autorecovery) 350kHz (typ) 1500Vdc

±10% VO,NOM TTL compatible (Positive or Negative options)

Asia (HK): 852-2437-9662

Page 2

PDF page 2 diagram

AMERICAS

5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

EUROPE

ASIA

Astec House, Waterfront Business Park

Units 2111-2116, Level 21

Merry Hill, Dudley

Tower1, Metroplaza

West Midlands, DY5 1LX, UK

223, Hing Fong Road

Telephone: 44 (1384) 842-211

Fwai Fong, New Territories

Facsimile: 44 (1384) 843-355

Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426

Output Voltage Output Current Efficiency2 Model Number

Input Volatge

Vo1 Vo2 Io1

Io2

36V to 75V

5V 3.3V 12A

36V to 75V

3.3V 2.5V 15A

36V to 75V

3.3V 1.8V 15A

36V to 75V

2.5V 1.5V 15A

\* Total power both outputs combined not to exceed 60 Watts OPTIONS:

15A 89.5% ALQ15AF48(N) - (6) 15A 87.7% ALQ15FG48(N) - (6) 15A 86.5% ALQ15FY48(N) - (6) 15A 84.0% ALQ15GM48(N) - (6)

Enable Function "N" = Negative Logic Enable (default is Positive Logic Enable - no suffix “N”)

“-6” = 3.7mm nominal pin length (default is 5mm nominal - no suffix “6”)

Pin Length

Pin Assignment

Dual Output

  1. +Vin 2. Enable (On/Off) 3. -Vin 4. +VO2 5. Secondary Return/Ground 6. Trim 7. +VO1

Notes: 1. 20 MHz bandwidth. External 10 uF tant. capacitor in parallel with 1 uF ceramic capacitor placed output and secondary return ground. 2. Efficiency measurements taken at full load - balanced output load current, nominal line and TA = 25°C. 3. All specifications are typical at nominal line, full load and TA = 25°C unless otherwise noted. 4. All specifications subject to change without notice. Mechanical drawings are for reference only 5. Technical Reference Notes should be consulted for detailed information when available 6. Warranty 1yr.

The information on this data sheet are believed to be accurate at the time of its release. Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use and application. (REV01: FEB 23, 2004)

www.astecpower.com

Mechanical Outline

PDF page 2 diagram
PDF page 2 diagram

PIN SIDE UP Dimensions are in inches [millimeters] Pin placement tolerance ± 0.005 [0.127] Mechanical Tolerance ± 0.02 [0.5]