AL02BT1N0 ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Rev Date: 02/02/2012 www.seielect.com This specification may be changed at any time without prior notice .1 marketing@seielect.com Please confirm technical specifications before you order and/or use. AL Series Thin Film Chip Inductor Stackpole Electronics, Inc. Resistive Product Solutions Features: • A photo lithographic single layer ceramic chip

  • Provides high SRF, excellent Q, superior temperature stability
  • SRF controlled within 10%
  • Stable inductance in high frequency circuits
  • Highly stable design for critical needs
  • Tight tolerances of ±1% down to ±0.1nH available
  • Contact factory for inductance values outside those listed in the datasheet
  • Find frequency curves, environmental and packaging specifications in relevant supplemental documents
  • VCO and TCXO circuits
  • RF transceiver modules
  • Wireless LAN
  • Communication appliances
  • Cellular phones
  • Pagers
  • GPS receiver
  • Bluetooth module Applications: How to Order 123456789 AL02GT10N Size

0201 Code Quantity Code nH

0402 B 10,000 1N0 1nH

S 20N8 20.8nH F G H J T Tape & Reel PackagingProduct Series Description Sizes InductanceCode CodeAL Thin Film Chip Inductor All02 Tolerance Tol ±0.1nH ±0.2nH ±5% ±0.3nH ±1% ±2% ±3%

Rev Date: 02/02/2012 www.seielect.com This specification may be changed at any time without prior notice .2 marketing@seielect.com Please confirm technical specifications before you order and/or use. AL Series Thin Film Chip Inductor Stackpole Electronics, Inc. Resistive Product Solutions Type / Code Unit AL01 AL02 ABCD Mechanical Specifications - Standard Item Requirement Test Method Measuring equipment and fixture: 0201: HP4287 + Agilent 16196C 0402: HP4287 + Agilent 16196B Insulation Resistance > 1000Mohm Apply 100VDC for 1 minute Bending Strength as specified Bending amplitude 3mm for 10 seconds Solderability 95% min. coverage 245±5ºC for 3 seconds Resistance to soldering Heat ∆ L ≤ 10% 260±5ºC for 10 seconds Dielectric Withstand Voltage > 100V Apply 100VA (rms) for 1 minute High Temperature Exposure ∆ L ≤ 10% 85±2ºC, 1000 +48/-0 hours Low Temperature Storage ∆ L ≤ 10% -40±3ºC, 1000 +48/-0 hours Temperature Cycle ∆ L ≤ 10% -40/RT/85/RT, 10 cycles Reference Standards: MIL-STD-202F, JIS-C 5201-1 Storage Temperature: 25±3ºC; Humidity < 80%RH as specifiedInductance 40±2ºC, 90~95% R.H. Max working voltage for 1000 hrs with 1.5 hrs "ON" and 0.5 hrs "OFF"Damp Heat with Load ∆ L ≤ 10% Performance Characteristics

Rev Date: 02/02/2012 www.seielect.com This specification may be changed at any time without prior notice .3 marketing@seielect.com Please confirm technical specifications before you order and/or use. AL Series Thin Film Chip Inductor Stackpole Electronics, Inc. Resistive Product Solutions Inductance Inductance Quality Factor SRF (GHz) DCR (Ω) IDC (mA) (nH) Tolerance (nH or %) min. min. max. max. 5.6 ±2, ±5% 8 / 500MHz 4 1.80 130 6.1 ±2, ±5% 8 / 500MHz 4 2.00 120 6.8 ±2, ±5% 8 / 500MHz 4 2.30 110 7.4 ±2, ±5% 8 / 500MHz 4 2.80 110 8.2 ±2, ±5% 8 / 500MHz 3 3.00 110 9.1 ±2, ±5% 8 / 500MHz 3 3.25 100 9.2 ±2, ±5% 8 / 500MHz 3 3.25 100 10.0 ±2, ±5% 8 / 500MHz 2 3.50 80

Rev Date: 02/02/2012 www.seielect.com This specification may be changed at any time without prior notice .4 marketing@seielect.com Please confirm technical specifications before you order and/or use. AL Series Thin Film Chip Inductor Stackpole Electronics, Inc. Resistive Product Solutions Inductance Inductance Quality Factor SRF (GHz) DCR (Ω) IDC (mA) (nH) Tolerance (nH or %) min. min. max. max. 10.0 ±1, 2, 3, 5% 13 / 500MHz 4.5 1.35 200 10.8 ±1, 2, 3, 5% 13 / 500MHz 4.5 1.35 200 12.0 ±1, 2, 3, 5% 13 / 500MHz 3.7 1.55 180 13.8 ±1, 2, 3, 5% 13 / 500MHz 3.7 1.75 180 15.0 ±1, 2, 3, 5% 13 / 500MHz 3.3 1.75 130 17.0 ±1, 2, 3, 5% 13 / 500MHz 3.1 1.95 100 18.0 ±1, 2, 3, 5% 13 / 500MHz 3.1 2.15 100 20.8 ±1, 2, 3, 5% 13 / 500MHz 2.8 2.55 90 22.0 ±1, 2, 3, 5% 13 / 500MHz 2.8 2.65 90 27.0 ±1, 2, 3, 5% 13 / 500MHz 2.5 3.25 75 33.0 ±5% 13 / 500MHz 2.5 4.50 75