AG403 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002 The Communications Edge TM Preliminary Product Information AG403 InGaP HBT Gain Block Functional Diagram Product Features

  • DC - 5000MHz
  • +17 dBm P1dB at 900MHz
  • +31 dBm OIP3 at 900MHz
  • 20.5 dB Gain at 900MHz
  • Single Voltage Supply
  • SOT-86 or SOT-89 SMT Package
  • Internally matched to 50 Ω Product Description The AG403 is a general-purpose buffer amplifier that offers hig h dynamic range in a low-cost surface-mount package. At 900 MHz, the AG403 typically provides 20.5 dB of gain, +31 dBm Outpu t IP3, and +17 dBm P1dB. The device combines dependable performance with consistent quality to maintain MTBF values exceeding 100 years at mounting temperatures of +85 °C and is housed in a SOT-86 and SOT-89 industry standard SMT packages. The AG403 consists of Darlington pair amplifiers using the hig h reliability InGaP/GaAs HBT technology process technology an d only requires DC-blocking capacitors, a bias resistor, and a n inductive RF choke for operation. The broadband MMIC amplifier can be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, W-CDMA, and UMTS. In addition, the AG403 will work for other various applications within the DC to 5 GHz frequency range such as CATV and fixed wireless. Typical Parameters Parameter1 Units Typical Frequency MHz 900 1900 S21 dB 20.5 19 S11 dB -20 -20 S22 dB -18 -15 Output P1dB dBm +17 +16 Output IP3 dBm +31 +29 Noise Figure dB 3.7 3.8 Supply Voltage V 6 6 Device Current mA 60 60 1. Data represents typical performance in an application board with T = 25ºC, Vs = +6 V, and Rbias = 16 Ω in a 50 Ω system.

Ordering Information

Part No. Description AG403-86 InGaP HBT Gain Block SOT-86 Style Package (Available in Tape & Reel) AG403-89 InGaP HBT Gain Block SOT-89 Style Package (Available in Tape & Reel) AG403-86PCB Fully Assembled Application Board AG403-89PCB Fully Assembled Application Board Specifications Parameters1 Units Min Typ Max Frequency Range MHz DC-5000 S21 - Gain dB 20.5 S11 - Input Return Loss dB -15 S22 - Output Return Loss dB -15 Output P1dB dBm +17 Output IP3 dBm +31 Noise Figure dB 3.7 Device Voltage V 5.0 Device Current mA 60 Test conditions unless otherwise noted 1. T = 25ºC, Supply Voltage = +6 V, Rbias = 16 Ω, Frequency = 900MHz, 50 Ω System. 2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 10MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to +85 °C Storage Temperature -40 to +125 °C Operation of this device above any of there parameters may cause permanent damage Application Circuit AG403 Blocking Capacitor RF OUT RF Choke VS = +6 V IS = 60 mA Bypass Capacitor Blocking Capacitor 16 Ω RF IN AG43RF IN GND RF OUT GND AG403-86 RF IN GND RF OUT GND AG403 AG403-89

This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002 The Communications Edge TM Preliminary Product Information AG403 InGaP HBT Gain Block .105 ±.005 45° .060 ± .005 .085 ± .005 (.195 - .215) .021 ± .004 .100 ±.005 0° - 8° .008 ± .002 .026 ± .005 .002 +.0020 (3X) Seating Plane .006 (Guage Plane) Outline Drawing Land Pattern Mounting Configuration Notes

This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002 The Communications Edge TM Preliminary Product Information AG403 InGaP HBT Gain Block Outline Drawing Land Pattern Mounting Configuration