DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

ANTI-SULFURATED CHIP RESISTORS AF122 (4Pin/2R) / AF124 (8Pin/4R) / AF162 (4Pin/ 2R)/ AF164 (8Pin/ 4R) 5%, 1% sizes 2 × 0402, 4 x 0402, 2 x 0603, 4 x 0603 RoHS compliant Product specification –March 20, 2017 V.5

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) AF XX X - X X X XX XXXX L (1) SIZE 12 = 0402 x 2 (0404) 12 = 0402 x 4 (0408) 16 = 0603 x 2 (0606) 16 = 0603 x 4 (0612) (2) NUMBER OF RESISTORS 2 = 2 resistors 4 = 4 resistors (3) TOLERANCE F = ± 1% J = ± 5% (for Jumper ordering, use code of J) (4) PACKAGING TYPE R = Paper taping reel (5) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec (6) TAPING REEL 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel (7) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (8) DEFAULT CODE Letter L is the system default code for ordering only. (Note) ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part number s are identified by the series, size, tolerance, packing type , temperature coefficient, t aping reel and resistance valu e. SCOPE This specification describes AF122/AF124/AF162/AF164 (convex)series chip resistor arrays with lead -free terminations made by thick film process.

APPLICATIONS

 Terminal for SDRAM and DDRAM  High -end Co mputer & Multimedia Electronics in high sulfur environment  Consume electronic equipments: PDAs, PNDs  Mobile phone, telecom…

FEATURES

 AEC-Q200 qualified  RoHS compliant  Reducing environmentally hazardous wastes  High component and equipment reliability  Savi ng of PCB space  None forbidden -materials used in products /production  Halogen Free Epoxy  Moisture sensitivity level: MSL 1 ORDERING EXAMPLE The ordering code of a AF122 convex chip resistor array, value 1,000 Ω with ±5% tolerance, supplied in 7 -inch tape reel is: AF122 -JR-071KL . NOTE 1. All our R-Chip products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XM (1 MΩ) 1M = 1,000,000 Ω

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 MARKING AF122 / 162 No marking AF124 / 164 I-Digit marking 1% E -24/E -96: R ≧ 100 Ω 4digits First three digits for significant figure and 4th digit for number of zeros 5% E -24: R ≧ 10Ω First two digits for significant figure and 3 rd digit for number of zeros For further marking information, please refer to data shee t “Chip resistors marking”. CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal embedded into a glass and covered by a glass. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the external terminations (matte tin on Ni- barrier) are added as shown in Fig.4. Fig. 1 OOUUTTLLIINNEESS Fig. 4 Chip resistor outlines DIMENSIONS TYPE AF122 AF124 AF162 AF164 Table 1 Fig. 2 Value = 0 Ω Fig. 3 Value = 240KΩ 3 60 Fig. 3 Value = 316KΩ AF122 / 162 AF124 / 164 For dimension, please refer to Table 1 Fig. 5 AF122/124/162/164 series chip resistors dimension

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting ”.

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS AF122 AF124 AF162 AF164 Operating Temperature Range –55 °C to +155 °C –55 °C to +155 °C –55 °C to +155 °C –55 °C to +155 °C Rated Power 1/16 W 1/16 W 1/16W 1/16W Maximum Working Voltage 50 V 25 V 50V 50V Maximum Overload Voltage 100 V 50 V 100V 100V Dielectric Withstanding Voltage

100 V 100 V 100V 100V

5% (E24) 1 Ω to 1 MΩ 1% (E24/E96) 10 Ω to 1 MΩ Jumper < 50 mΩ 5% (E24) 1 Ω to 1 MΩ 1% (E24/E96) 1 Ω to 1 MΩ Jumper < 50 mΩ 5% (E24) 1 Ω to 1 MΩ 1% (E24/E96) 1 Ω to 1 MΩ Jumper < 50 mΩ 5% (E24) 1 Ω to 1 MΩ 1% (E24/E96) 1 Ω to 1 MΩ Jumper < 50 mΩ Temperature Coefficient 1 Ω ≤ R ≤ 10 Ω ± 250 ppm/°C 10 Ω ≤ R ≤ 1 MΩ ± 200 ppm/°C ± 250 ppm/°C Jumper Criteria Rated Current 0.5 A Rated Current 1.0 A Rated Current 1.0 A Rated Current 1.0A Maximum Current 1.0 A Maximum Current 2.0 A Maximum Current 2.0 A Maximum Current 2.0A Table 2 PACKING STYLE AND PACKAGING QUANTITY PACKING STYLE REEL DIMENSION AF122 AF124 AF162 AF164 Paper Taping Reel (R) 7" (178 mm) 10,000 units 10,000 units 5,000 units 5,000 units 13" (330 mm) 50,000 units 40,000 units --- 20,000 units NOTE 1. For paper tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”. Table 3 Packing style and packaging quantity SCHEMATIC Fig. 6 Equivalent circuit diagram For dimension, please refer to Fig. 5 and Table 1

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 Fig. 7 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb) FUNCTIONAL DESCRIPTION PPOOWWEERR RRAATTIINNGG AF122 / AF124 / AF162 / AF164 rated power at 70 °C is 1/16 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rat ed power is determined by the following formula: R) X (P or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value ( Ω)

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Endurance MIL-STD-202-method 108 IEC 60115-1 4.25 1,000 hours at 70± 2 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ± (2%+0.05 Ω ) <100 mΩ for Jumper High Temperature Exposure MIL-STD-202-method 108 1,000 hours at maximum operating temperature depending on specification, unpowered Tolerances: 155± 3 °C ± (1%+0.05 Ω) <50 mΩ for Jumper Moisture Resistance MIL-STD-202-method 106 Each temperature / humidity cycle is defined at 8 hours (method 106G), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24± 2 hours after test conclusion ± (2%+0.05 Ω) <100 mΩ for Jumper Thermal Shock MIL-STD-202-method 107 -55/+125 °C Note: Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ± (1%+0.05 Ω) <50 mΩ for Jumper Short Time Overload IEC60115-1 4.13 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature ± (2%+0.05 Ω) <50 mΩ for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required 3 mm bending Bending time: 60± 5 seconds Ohmic value checked during bending ± (1%+0.05 Ω) <50 mΩ for Jumper No visible damage Table 4 Test condition, procedure and requirements

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting J-STD-002 test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching J-STD-002 test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60115-1 4.18 MIL-STD-202 Method 215 Condition B, no pre-heat of samples Leadfree solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (1%+0.05Ω) <50 mΩ for Jumper No visible damage FOS ASTM-B-809-95* *Modified Sulfur 750 hours, 105℃, unpowered ± (4.0%+0.05Ω) <100mΩ for Jumper

122/124/162/164 (RoHS Compliant) Chip Resistor Surface Mount Product specification www.yageo.com Mar. 20, 2017 V.5

REVISION HISTORY

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 5 Mar. 20, 2017 - - Modify AF124/164 Equivalent Circuit Diagram Version 4 Jun. 23, 2016 - - AEC-Q200 qualified Version 3 Nov. 17, 2015 - - Add in AF162 Version 2 May 29,2015 - - Add in AF164 Version 1 Aug. 15, 2014 - - Update AF124 dimensions Version 0 Oct. 02, 2013 - - First issue of this specification