AEE00-12VIN ASTEC

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram

10 Watts

AEE00-12Vin

PDF page 1 diagram

Input

Efficiency

Output

Special Features

  • 10 W, Dual output
  • 2:1 Input range
  • 1.0" x 2.0" x 0.33 case
  • Industry standard package
  • Low Profile
  • Low Cost

Environmental

Operating base temperature range: -25°C to +100°C Storage temperature: -40°C to +125°C MTBF: 3 Million Hours (Belcore TR332)

Safety

UL UL1950 Recognition

CSA CSA22.2-950 Recognition

TUV EN60950 Recognition

Electrical Specs

Input range

9 to 18 VDC

78% typical (3.3V)

Voltage tolerance

±1.0%

Overall regulation

±1% max

Noise/ripple

1% Typ, 2% Max

Transient response

300 usec typical (50% step load change to within 3%Vo)

Temperature Regulation

±0.02 %Vo/°C

Switching frequency

330kHz

Isolation

I/O isolation

1500 VDC Input to Output 1000 VDC Input to Case 1000 VDC Output to Case

Isolation Resistance

300 Mohms

Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662

North America (USA): 1-888-41-ASTEC

Page 2

PDF page 2 diagram

AMERICAS

5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

ASIA

EUROPE

Astec House, Waterfront Business Park

Units 2111-2116, Level 21

Merry Hill, Dudley

Tower1, Metroplaza

West Midlands, DY5 1LX, UK

223, Hing Fong Road

Telephone: 44 (1384) 842-211

Fwai Fong, New Territories

Facsimile: 44 (1384) 843-355

Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426

Input Output Efficiency Model Number Voltage Voltage

9-18 V 3.3V @ 2.55 A 78% AEE02F12-49 9-18 V 5.0V @ 2 A 81% AEE02A12-49 9-18 V 12V @ 0.84 A 83% AEE00B12-49 9-18 V 15V @ 0.68 A 84% AEE00C12-49

9-18 V ±5V @ ±1.0 A 81% AEE01AA12-4 9-18 V ±12V @ ±0.42 A 83% AEE00BB12-4 9-18 V ±15V @ ±0.33 A 84% AEE00CC12-4

NOTES: Enable Function "4" = positive logic enable Trim Feature "9" = Trim feature

Mechanical Dimensions and Pin Assignments

PDF page 2 diagram

Notes:

  1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor is recommended to be placed from +V out to comm. 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only.

www.astec.com