ADS1202 BURR-BROWN

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 21

Technical content

SBAS275 – DECEMBER 2002 www.ti.com

DESCRIPTION

The ADS1202 is a precision, 80dB dynamic range, delta- sigma (∆∑ ) modulator operating from a single +5V supply. The differential inputs are ideal for direct connections to transducers or low-level signals. With the appropriate digital filter and modulator rate, the device can be used to achieve 16-bit Analog-to-Digital (A/D) conversion with no missing codes. Effective resolution of 12 bits can be maintained with a digital filter bandwidth of 10kHz at a modulator rate of 10MHz. The ADS1202 is designed for use in medium reso- lution measurement applications including current measure- ments, smart transmitters, industrial process control, weigh scales, chromatography, and portable instrumentation. It is available in a TSSOP-8 package.

FEATURES

G RESOLUTION/SPEED TRADE-OFF: 10-Bit Effective Resolution with 20µs Signal Delay (12-bit with 77µs) G ±250mV INPUT RANGE WITH SINGLE 5V SUPPLY G 2% INTERNAL REFERENCE VOLTAGE G 2% GAIN ERROR G FLEXIBLE SERIAL INTERFACE WITH FOUR DIFFERENT MODES G IMPLEMENTED TWINNED BINARY CODING AS SPLIT PHASE OR MANCHESTER CODING FOR ONE LINE INTERFACING G OPERATING TEMPERATURE RANGE: –40 °C to +85°C PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2002, Texas Instruments Incorporated Motor Control Current Shunt 1-Bit, 10MHz, 2nd-Order, Delta-Sigma Modulator Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

APPLICATIONS

G INDUSTRIAL PROCESS CONTROL G INSTRUMENTATION G SMART TRANSMITTERS G PORTABLE INSTRUMENTS G WEIGHT SCALES G PRESSURE TRANSDUCERS Buffer Reference Voltage 2.5V 2nd-Order ∆∑ Modulator RC Oscillator 20MHz Interface Circuit MDAT MCLK VIN+ VIN– VDD GND

SBAS275www.ti.com PIN NUMBER NAME DESCRIPTION

1 MO Mode Input

2V IN+ Analog Input: Noninverting Input 3V IN– Analog Input: Inverting Input

4 M1 Mode Input

5 GND Power Supply Ground

6 MDAT Modulator Data Output

7 MCLK Modulator Clock Input or Output

DD Power Supply, +5V Nominal ELECTROSTATIC DISCHARGE SENSITIVITY This integrated circuit can be damaged by ESD. Texas Instru- ments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degrada- tion to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PARAMETER MIN NOM MAX UNIT Supply Voltage, VDD 4.75 5.0 5.25 V Analog Input Voltage, VIN –250 +250 mV Operating Common-Mode Signal, VCM 05 V External Clock(1) 81 0 1 2 M H z Operating Junction Temperature Range –40 105 °C NOTE: (1) With reduced accuracy, minimum clock can go up to 500kHz. ABSOLUTE MAXIMUM RATINGS Over operating free-air temperature (unless otherwise noted)(1) NOTE: (1) Stresses beyond those listed under the Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under the Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. DERATING TA < 25°C FACTOR T A = 70°CT A = 85°C POWER ABOVE POWER POWER PACKAGE RATING T A = 25°C (1) RATING RATING TSSOP-8 483.6mW 3.868mW/ °C 309.5mW 251.4mW NOTE: (1) This is the inverse of the traditional junction-to-ambient thermal resistance (RθJA). Thermal resistances are not production tested and are for informational purposes only. DISSIPATION RATING MAXIMUM INTEGRAL SPECIFIED LINEARITY MAXIMUM PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT PRODUCT ERROR (LSB) GAIN ERROR (%) PACKAGE-LEAD DESIGNATOR (1) RANGE MARKING NUMBER MEDIA, QUANTITY ADS1202 12 ±2 TSSOP-8 PW –40°C to +85°C ADS1202I ADS1202IPWT Tape and Reel, 250 ADS1202 "" """ " ADS1202IPWR Tape and Reel, 2000 PACKAGE/ORDERING INFORMATION NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com. V IN+ VIN– VDD MCLK MDAT GND ADS1202 PIN CONFIGURATION PIN DESCRIPTIONS Top View TSSOP R ON = 350Ω C (SAMPLE) = 5pF BV DD D IN BGND AV DD AIN AGND Diode Turn on Voltage: 0.35V Equivalent Analog Input Circuit Equivalent Digital Input Circuit EQUIVALENT INPUT CIRCUIT RECOMMENDED OPERATING CONDITIONS

SBAS275 www.ti.com

ELECTRICAL CHARACTERISTICS

Over recommended operating free-air temperature range at –40°C to +85°C, VDD = 5V, +In = –250mV to 250mV, –In = 0V, and MCLK = 10MHz, unless otherwise noted. ADS1202IPW PARAMETER CONDITIONS MIN TYP (1) MAX UNITS RESOLUTION 16 Bits DC ACCURACY Integral Nonlinearity INL ±3 ±12 LSB 0.005 0.018 % Differential Linearity(1) DNL ±1 LSB Input Offset V OS ±300 ±1000 µV Input Offset Drift TCV OS 28 µV/°C Gain Error G ERR ±0.25 ±2% Gain Error Drift TCG ERR 20 ppm/ °C Power-Supply Rejection Ratio PSRR 4.75V < V DD < 5.25V 80 dB ANALOG INPUT Full-Scale Range FSR +In – (–In) ±320 mV Operating Common-Mode Signal(2) –0.1 5 V Input Capacitance Common-Mode 3 pF Input Leakage Current ±1n A Differential Input Resistance Equivalent 28 k Ω Differential Input Capacitance 5p F Common-Mode Rejection Ratio (2) CMRR At DC 90 dB VIN = ±1.25Vp-p at 50kHz 85 dB INTERNAL VOLTAGE REFERENCE Reference Voltage V OUT Scale to 320mV 2.450 2.5 2.550 V Initial Accuracy Scale to 320mV ±2+-+ % Reference Temperature Drift dV OUT /dT ±20 ppm/ °C PSRR 80 dB Startup Time 0.1 ms INTERNAL CLOCK FOR MODES, 0, 1, AND 2 Clock Frequency 8 10 12 MHz EXTERNAL CLOCK FOR MODE 3 Clock Frequency 16 20 24 MHz AC ACCURACY Signal-to-Noise Ratio + Distortion SINAD V IN = ±250mVp-p at 5kHz 70 dB Signal-to-Noise Ratio SNR V IN = ±250mVp-p at 5kHz 67 70.5 dB Total Harmonic Distortion THD V IN = ±250mVp-p at 5kHz –84 dB Spurious Free Dynamic Range SFDR V IN = ±250mVp-p at 5kHz 84 dB DIGITAL INPUT Logic Family TTL with Schmitt Trigger High-Level Input Voltage V IH 2.6 V DD + 0.3 V Low-Level Input Voltage V IL –0.3 0.8 V High-Level Input Current I IH VI = VDD 0.005 2.5 µA Low-Level Input Current I IL VI = GND –2.5 0.005 µA Input Capacitance C J 5p F DIGITAL OUTPUT High-Level Digital Output V OH VDD = 4.5V, IO = –5mA 4.6 V VDD = 4.5V, IO = –15mA 3.9 V Low-Level Digital Output V OL VDD = 4.5V, IO = 5mA 0.4 V VDD = 4.5V, IO = 15mA 1.1 V Output Capacitance C O 5p F Load Capacitance C L 30 pF POWER SUPPLY Supply Voltage V DD 4.5 5 5.5 V Operating Supply Current I CC Mode 0 6 7.5 mA Mode 3 8 9.5 mA Power Dissipation V DD = 5V, Mode 0 30 37.5 mW VDD = 5V, Mode 3 40 47.5 mW OPERATING TEMPERATURE –40 +85 °C NOTES: (1) All typical values are at TA = +25°C. (2) Ensured by design. (3) Integral nonlinearity is defined as one-half the peak-to-peak deviation of the best fit line through the transfer curve for VIN+ = –250mV to +250mV, expressed either as the number of LSBs or as a percent of measured input range (500mV). (4) Only typical information parameter not tested.

SBAS275www.ti.com TIMING DIAGRAMS MCLK MDAT tC1 tW1 tD1 MCLK MDAT tW2 tC2 tD2 tD3 tC1 tC3 tw1 tw3 MCLK 10 1 1 0 0 MDAT DIAGRAM 1: Mode 0 Operation. DIAGRAM 2: Mode 1 Operation. DIAGRAM 3: Mode 2 Operation.

SBAS275 www.ti.com tD4 tw4 tC4 MCLK MDAT DIAGRAM 4: Mode 3 Operation. SPEC DESCRIPTION MODE MIN MAX UNITS tC1 Clock Period 0 90 110 ns tW1 Clock HIGH Time 0 t C1 /2 – 5t C1 /2 + 5 ns tD1 Data delay after rising edge of clock 0 t C1 /4 – 10 t C1 /4 + 10 ns tC2 Clock Period 1 180 220 ns tW2 Clock HIGH Time 1 t C2 /2 – 5t C2 /2 + 5 ns tD2 Data delay after rising edge of clock 1 t C2 /4 – 10 t C2 /4 + 10 ns tD3 Data delay after falling edge of clock 1 t C2 /4 – 10 t C2 /4 + 10 ns tC3 Clock Period 2 90 110 ns tW3 Clock HIGH Time 2 t C3 /2 – 5t C3 /2 + 5 ns tC4 Clock Period 3 45 55 ns tW4 Clock HIGH Time 3 10 t C4 – 10 ns tD4 Data delay after falling edge of clock 3 0 10 ns tR1 Rise Time of Clock 3 0 10 ns tF1 Fall Time of Clock 3 0 10 ns NOTE: All input signals are specified with tR = tF = 5ns (10% to 90% of VDD ) and timed from a voltage level of (VIL + VIH)/2. See timing diagrams 1 thru 4. TIMING CHARACTERISTICS over recommended operating free-air temperature range –40°C to +85°C, VDD = 5V, and MCLK = 10MHz, unless otherwise noted. TIMING DIAGRAMS (Cont.)

SBAS275www.ti.com TYPICAL CHARACTERISTICS VDD = 5V, +In = –250mV to 250mV, –In = 0V, and MCLK = 10MHz, unless otherwise noted. INTEGRAL NONLINEARITY vs INPUT SIGNAL (Mode 0) 0–320 –240 –80–160 80 240 160 320 Differential Input Voltage (mV) INL (LSB) 25°C +85°C –40°C INTEGRAL NONLINEARITY vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) INL (LSB) Mode 0 Mode 3 INTEGRAL NONLINEARITY vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) INL (%) 0.010 0.009 0.008 0.007 0.006 0.005 0.004 0.003 0.002 0.001 Mode 0 Mode 3 OFFSET vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) Offset (µV) 300 200 100 –100 –200 –300 –400 –500 –600 –700 Mode 0 Mode 3 GAIN vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) Gain (%) 0.14 0.12 0.10 0.08 0.06 0.04 0.02 Mode 0 Mode 3 INTEGRAL NONLINEARITY vs INPUT SIGNAL (Mode 3) 0–320 –240 –80–160 80 240 160 320 Differential Input Voltage (mV) INL (LSB) 25°C +85°C –40°C

SBAS275 www.ti.com TYPICAL CHARACTERISTICS (Cont.) VDD = 5V, +In = –250mV to 250mV, –In = 0V, and MCLK = 10MHz, unless otherwise noted. RMS NOISE vs INPUT VOLTAGE LEVEL –320 –240 –80–160 0 240 16080 320 Differential Input Voltage (mV) RMS Noise (µV) SIGNAL-TO-NOISE RATIO vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) SNR (dB) 71.0 70.8 70.6 70.4 70.2 70.0 69.8 69.6 69.4 69.2 69.0 Mode 0 Mode 3 SIGNAL-TO-NOISE + DISTORTION vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) SINAD (dB) 71.0 70.6 70.2 69.8 69.4 69.0 Mode 0 Mode 3 EFFECTIVE NUMBER OF BITS vs DECIMATION RATIO 0 400 800 1200 1600 2000 Decimation Ratio (OSR) ENOB Sinc

3 Filter

SPURIOUS-FREE DYNAMIC RANGE AND TOTAL HARMOINIC DISTORTION vs TEMPERATURE (Mode 0) –40 –20 20 04 0 8 0 60 100 Temperature (°C) SFDR THD SFDR (dB) THD (dB) –95 –93 –91 –89 –87 –85 –83 –81 –79 –77 –75 0.5Vp-p 5kHz SPURIOUS-FREE DYNAMIC RANGE AND TOTAL HARMOINIC DISTORTION vs TEMPERATURE (Mode 3) –40 –20 20 04 0 8 0 60 100 Temperature (°C) SFDR THD SFDR (dB) THD (dB) –95 –93 –91 –89 –87 –85 –83 –81 –79 –77 –75

SBAS275www.ti.com TYPICAL CHARACTERISTICS (Cont.) VDD = 5V, +In = –250mV to 250mV, –In = 0V, and MCLK = 10MHz, unless otherwise noted. SPURIOUS-FREE DYNAMIC RANGE AND TOTAL HARMOINIC DISTORTION vs INPUT FREQUENCY (Mode 0) 11 0 Input Frequency (kHz) SFDR THD SFDR (dB) THD (dB) 110 100 –110 –100 –90 –80 –70 –60 –50 OSR = 256 Sinc3 Filter SPURIOUS-FREE DYNAMIC RANGE AND TOTAL HARMOINIC DISTORTION vs INPUT FREQUENCY (Mode 3) 11 0 Input Frequency (kHz) SFDR THD SFDR (dB) THD (dB) 110 100 –110 –100 –90 –80 –70 –60 –50 OSR = 256 Sinc3 Filter 802 6 41 0 1 4 1 6 1 8 12 20 Frequency (kHz) Magnitude (dB) –20 –40 –60 –80 –100 –120 –140 FREQUENCY SPECTRUM (4096 Point FFT, fIN = 1kHz, 0.5Vp-p) Mode 0 FREQUENCY SPECTRUM (4096 Point FFT, fIN = 5kHz, 0.5Vp-p) 802 6 41 0 1 4 1 6 1 8 12 20 Frequency (kHz) Magnitude (dB) –20 –40 –60 –80 –100 –120 –140 Mode 0 CLOCK FREQUENCY vs TEMPERATURE –40 –20 0 20 40 60 80 100 120 Temperature (°C) MCLK (MHz) 10.5 10.2 9.9 9.6 9.3 9.0 COMMON-MODE REJECTION RATIO vs FREQUENCY 1 10 100 Frequency of Power Supply (Hz) CMRR (dB) 100

SBAS275 www.ti.com TYPICAL CHARACTERISTICS (Cont.) VDD = 5V, +In = –250mV to 250mV, –In = 0V, and MCLK = 10MHz, unless otherwise noted. 2000 1800 1600 1400 1200 1000 800 600 400 200 HISTOGRAM OF OUTPUT DATA ppm of FS –1114 –1053 –992 –931 –870 –809 –748 –687 –626 Number of Occurrences POWER-SUPPLY CURRENT vs TEMPERATURE –40 –20 20 04 0 8 0 60 100 Temperature (°C) Current (mA) Mode 0 Mode 3 MCLK AND MDAT TYPICAL SINK CURRENT 3012 456 Output Voltage VOL (V) Output Current IOL (mA) 5.5V 4.5V MCLK AND MDAT TYPICAL SOURCE CURRENT 3012 456 Output Voltage VOH (V) Output Current IOH (mA) 5.5V 4.5V POWER-SUPPLY REJECTION RATIO vs FREQUENCY 100 1k 10k 100 k Frequency of Power Supply (Hz) PSRR (dB)

  1. The output of the converter (MDAT) provides a stream

exceeds 85dB with OSR = 256. time, appears at the output of the converter. FIGURE 1. Connection Diagram for the ADS1202 Delta-Sigma Modulator Including DSP.

delta-sigma modulator is elaborated by the Code Generator. binary coding of the same signal. The last control signal from the decoder controls MUX4. MUX2 selects the input or output clock, the MCLK signal. and provides an input to MUX1 as an external clock, EXTCLK. and another as the input for the external clock signal. to obtain the desired mode of operation. mode 3, which are shown in Table I.

0 Internal Clock, Synchronous Data Output LOW LOW

1 Internal Clock, Synchronous Data Output, LOW HIGH

2 Internal Clock, Manchester Coded Data Output HIGH LOW

3 External Clock, Synchronous Data Output HIGH HIGH

TABLE I. Mode Definition and Description. FIGURE 5. Flexible Interface Block Diagram.

SBAS275www.ti.com Mode 0 operation in a typical application is shown in Figure 10. Measurement of the motor phase current is done via the shunt resistor. For better performance, both signals are filtered. R 2 and C 2 filter noise on the noninverting input signal, R3 and C3 filter noise on the inverting input signal, and C 4 in combination with R2 and R3 filter the common-mode input noise. In this configuration, the shunt resistor is con- nected via three wires with the ADS1202. The power supply is taken from the upper gate driver power supply. A decoupling capacitor of 0.1µF is recommended for filtering the power supply. If better filtering is required, an additional 1µF to 10µF capacitor can be added. The control lines M0 and M1 are both LOW while the part is operating in mode 0. Two output signals, MCLK and MDAT, are connected directly to the optocoupler. The optocoupler can be connected to transfer a direct or inverse signal because the output stage has the capacity to source and sink the same current. The discharge resistor is not needed in parallel with optocoupler diodes because the output driver has the capacity to keep the LED diode out of the charge. FIGURE 10. Application Diagram in Mode 0. M0 is LOW. Only the noninverting input signal is filtered. connected to the shunt resistor. packages in the application.

capacitively coupled into the analog portion of the ADS1202. and different power supplies. connect the two planes together. FIGURE 13. Parallel Operation of ADS1202 in Mode 3.

SBAS275 www.ti.com PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PINS SHOWN

0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153 PACKAGE DRAWING

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third–party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2002, Texas Instruments Incorporated