DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
ANALOG-TO-DIGITAL CONVERTER
FEATURES
l COMPLETE 12-BIT A/D CONVERTER WITH REFERENCE, CLOCK, AND 8-, 12-, or 16- BIT MICROPROCESSOR BUS INTERFACE l ALTERNATE SOURCE FOR HI774 A/D CONVERTER: 8.5 µs Conversion Time, 150ns Bus Access Time l FULLY SPECIFIED FOR OPERATION ON ±12V OR ±15V SUPPLIES l NO MISSING CODES OVER TEMPERATURE: 0°C to +75°C: ADC774J, K –55°C to +125°C: ADC774SH, TH
DESCRIPTION
The ADC774 is a 12-bit successive approximation analog-to-digital converter, utilizing state-of-the-art CMOS and laser-trimmed bipolar die custom-designed for freedom from latch-up and for optimum AC per- formance. It is complete with a self-contained +10V reference, internal clock, digital interface for micropro- cessor control, and three-state outputs. The reference circuit, containing a buried zener, is laser- trimmed for minimum temperature coefficient. The clock oscillator is current-controlled for excellent sta- bility over temperature. Full-scale and offset errors may be externally trimmed to zero. Internal scaling resistors are provided for the selection of analog input signal ranges of 0V to +10V , 0V to +20V, ±5V, and ±10V. The converter may be externally programmed to pro- vide 8- or 12-bit resolution. The conversion time for 12 bits is factory set for 8.5µs maximum. Output data are available in a parallel format from TTL- compatible three-state output buffers. Output data are coded in straight binary for unipolar input signals and bipolar offset binary for bipolar input signals. The ADC774, available in both industrial and military temperature ranges, requires supply voltages of +5V and ±12V or ±15V. It is packaged in a 28-pin plastic DIP, or a hermetic side-brazed ceramic DIP. Successive Approximation Register Control Logic Comparator 12-Bit D/A Converter Control Inputs Bipolar Offset 20V Range 10V Range Reference Input Reference Output Three-State Buffers Status Parallel Data Output Clock 10V Reference ADC774 International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706 Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 © 1988 Burr-Brown Corporation PDS-835E Printed in U.S.A. March, 1992
TA = +25°C, VCC = +12V or +15V, VEE = –12V or –15V, VLOGIC = +5V unless otherwise specified. ADC774J, ADC774SH ADC774K, ADC774TH PARAMETER MIN TYP MAX MIN TYP MAX UNITS RESOLUTION 12 * Bits INPUTS ANALOG Voltage Ranges: Unipolar 0 to +10, 0 to +20 * V Bipolar ±5, ±10 * V Impedance: 0 to +10V, ±5V 3.75 5 6.25 * * * k Ω ±10V, 0V to +20V 7.5 10 12.5 * * * k Ω DIGITAL (CE, CS, R/C, A O , 12/8) Over Temperature Range Voltages: Logic 1 +2 +5.5 * * V Logic 0 –0.5 +0.8 * * V Current –5 0.1 +5 * * * µA Capacitance 5 * pF TRANSFER CHARACTERISTICS ACCURACY At +25°C Linearity Error ±1 ±1/2 LSB Unipolar Offset Error (Adjustable to Zero) ±2 * LSB Bipolar Offset Error (Adjustable to Zero) ±10 ±4 LSB Full-Scale Calibration Error (1) (Adjustable to Zero) ±0.25 * % of FS (2) No Missing Codes Resolution (Diff. Linearity) 11 12 Bits Inherent Quantization Error ±1/2 * LSB TMIN to TMAX Linearity Error: J, K Grades ±1 ±1/2 LSB S, T Grades ±1 ±3/4 LSB Full-Scale Calibration Error Without Initial Adjustment (1) : J, K Grades ±0.47 ±0.37 % of FS S, T Grades ±0.75 ±0.5 % of FS Adjusted to Zero at +25°C: J, K Grades ±0.22 ±0.12 % of FS S, T Grades ±0.5 ±0.25 % of FS No Missing Codes Resolution (Diff. Linearity) 11 12 Bits TEMPERATURE COEFFICIENTS (TMIN to TMAX )(3) Unipolar Offset: J, K Grades ±10 ±5 ppm/ °C S, T Grades ±5 ±2.5 ppm/ °C Max Change: All Grades ±2 ±1 LSB Bipolar Offset: All Grades ±10 ±5 ppm/ °C Max Change: J, K Grades ±2 ±1 LSB S, T Grades ±4 ±2 LSB Full-Scale Calibration: J, K Grades ±45 ±25 ppm/ °C S, T Grades ±50 ±25 ppm/ °C Max Change: J, K Grades ±9 ±5 LSB S, T Grades ±20 ±10 LSB POWER SUPPLY SENSITIVITY Change in Full-Scale Calibration +13.5V < VCC <+16.5V or +11.4V < VCC < +12.6V ±2 ±1 LSB –16.5V < VEE <–13.5V or –12.6V < VEE < –11.4V ±2 ±1 LSB +4.5V < VLOGIC <+5.5V ±1/2 * LSB CONVERSION TIME (4,5) 8-Bit Cycle 5 5.3 * * µs 12-Bit Cycle 7.5 8.5 • • µs OUTPUTS DIGITAL (DB11 – DB0, STATUS) (Over Temperature Range) Output Codes: Unipolar Unipolar Straight Binary (USB) Bipolar Bipolar Offset Binary (BOB) Logic Levels: Logic 0 (I SINK = 1.6mA) +0.4 * V Logic 1 (ISOURCE = 500µA) +2.4 * V Leakage, Data Bits Only, High-Z State –5 0.1 +5 * * * µA Capacitance 5 * pF
*Same specification as ADC774JH, JP, SH. NOTES: (1) With fixed 50Ω resistor from Ref Out to Ref In. This parameter is also adjustable to zero at +25C. (2) FS in this specification table means Full Scale Range. That is, for a ±10V input range FS means 20V; for a 0V to +10V range, FS means 10V. The term Full Scale for these specification instead of Full-Scale Range is used to be consistent with other vendors' specifications tables. (3) Using internal reference. (4) See “Controlling the ADC774” section for detailed information concerning digital timing. (5) The Harris HI-774 uses a subranging/error correction technique that allows one to begin conversion before a preceding sample-hold or multiplexer has settled to ±1/2LSB. For 12-bit accurate conversions, the input transient to the ADC774 must settle to less than ±1/2LSB before conversion is started. The ADC774 is compatible with HI-774 in all other respects. (6) External loading must be constant during conversion. The reference output requires no buffer amplifier with either ±12V or ±15V power supplies. SPECIFICATIONS (CONT) ELECTRICAL TA = +25°C, VCC = +12V or +15V, VEE = –12V or –15V, VLOGIC = +5V unless otherwise specified. ADC774J, ADC774SH ADC774K, ADC774TH PARAMETER MIN TYP MAX MIN TYP MAX UNITS INTERNAL REFERENCE VOLRAGE Voltage +9.9 +10 +10.1 * * * V Source Current Available for External Loads (6) 2.0 * mA POWER SUPPLY REQUIREMENTS Voltage: V VLOGIC +4.5 +5.5 * * V Current: ICC 3.5 5 * * mA IEE 15 20 * * mA ILOGIC 91 5 * *m A Power Dissipation (±15V Supplies) \` 325 450 * * mW TEMPERATURE RANGE (Ambient: TMIN , TMAX ) Specifications: J, K Grades 0 +75 * * °C S, T Grades –55 +125 * * °C Storage –65 +150 * * °C PIN CONFIGURATION Top View DIP +5VDC Supply (V ) CS A R/C CE Ref Out Analog Common Ref In V Bipolar Offset 10V Range 20V Range STATUS DB11 (MSB) DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 (LSB) Digital Common LOGIC CC EE 10kΩ 10V Reference 12-Bit D/A Converter Successive Approximation Register Control Logic Power-up Reset Clock
12 Bits
Three-State Buffers and Control O The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.
Control Inputs (CE, CS, AO , 12/8, R/C) Analog Inputs (Ref In, Bipolar Offset, 10VIN ) Momentary Short to VCC CAUTION: These devices are sensitive to electrostatic discharge. Appropriate I.C. handling procedures should be followed. BURN-IN SCREENING Burn-in screening is available for both plastic and ceramic package ADC774s. Burn-in duration is 160 hours at the temperature (or equivalent combination of time and tem- perature) indicated below: Plastic “-BI” models: +85°C Ceramic “-BI” models: +125°C All units are 100% electrically tested after burn-in is com- pleted. To order burn-in, add “-BI” to the base model number (e.g. ADC774KP-BI). See Ordering Information for pricing.
ORDERING INFORMATION
See text for details. LINEARITY TEMPERATURE ERROR MAX MODEL PACKAGE RANGE (T MIN TO TMAX ) ADC774JP Plastic DIP 0 °C TO +75°C ±1LSB ADC774KP Plastic DIP 0 °C to +75°C ±1/2LSB ADC774JH Ceramic DIP 0 °C to +75°C ±1LSB ADC774KH Ceramic DIP 0 °C to +75°C ±1/2LSB ADC774SH Ceramic DIP –55 °C to +125°C ±1LSB ADC774TH Ceramic DIP –55 °C to +125°C ±3/4LSB TEMPERATURE BURN-IN TEMP MODEL PACKAGE RANGE (160 HOURS) (1) ADC774JP-BI Plastic DIP 0 °C to +75°C +85 °C ADC774KP-BI Plastic DIP 0 °C to +75°C +85 °C ADC774JH-BI Ceramic DIP 0 °C to +75°C +125 °C ADC774KH-BI Ceramic DIP 0 °C to +75°C +125 °C ADC774SH-BI Ceramic DIP –55 °C to +125°C +125 °C ADC774TH-BI Ceramic DIP –55 °C to +125°C +125 °C
PACKAGE INFORMATION
MODEL PACKAGE NUMBER (1) ADC774JP 28-Pin Plastic DIP 215 ADC774KP 28-Pin Plastic DIP 215 ADC774JH 28-Pin Ceramic DIP 149 ADC774KH 28-Pin Ceramic DIP 149 ADC774SH 28-Pin Ceramic DIP 149 ADC774TH 28-Pin Ceramic DIP 149 ADC774JP-BI 28-Pin Plastic DIP 215 ADC774KP-BI 28-Pin Plastic DIP 215 ADC774JH-BI 28-Pin Ceramic DIP 149 ADC774KH-BI 28-Pin Ceramic DIP 149 ADC774SH-BI 28-Pin Ceramic DIP 149 ADC774TH-BI 28-Pin Ceramic DIP 149 NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix D of Burr-Brown IC Data Book.
truth table is listed in Table II. using ADC774 to replace the HI-774. require full bus interface capability. (“1” = read) conversion. Must be high (“1”) to read output data. 0-1 edge may be used to initiate a read operation. (“1” = 12 bits) MSBs or LSBs as determined by the A O line. TABLE I. ADC774 Control Line Functions.
0 X X X X None
TABLE II. Control Input Truth Table. TABLE III. Stand-Alone Mode Timing. Conversion is initiated by a high-to-low transition of R/C. must remain low for a minimum of 50ns. FIGURE 2. R/C Pulse High—Outputs Enabled Only While FIGURE 1. R/C Pulse Low—Outputs Enabled After Con-
Figure 3. The specifications for timing are contained in verter by being in a high state only during conversion.