DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 8
Technical content
ANALOG-TO-DIGITAL CONVERTER
FEATURES
l ±0.003% MAXIMUM NONLINEARITY l COMPACT DESIGN: 32-pin Hermetic Ceramic Package l CONVERSION SPEED: 50 µs max
DESCRIPTION
The ADC71 is a low cost, high quality, 16-bit succes- sive approximation analog-to-digital converter. It uses laser-trimmed ICs and is packaged in a convenient 32-pin hermetic ceramic dual-in-line package. The converter is complete with internal reference, clock, comparator, and thin-film scaling resistors, which allow selection of analog input ranges of ±2.5V, ±5V, ±10V, 0 to +5V, 0 to +10V and 0 to +20V. Data is available in parallel and serial form with corresponding clock and status output. All digital in- puts and outputs are TTL-compatible. Power supply voltages are ±15VDC and +5VDC. International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706 Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 16-Bit Successive Approx. Register (SAR) 16-Bit D/A Converter Reference Clock Parallel Digital Output Short Cycle Convert Command Input Range Select Comparator In Clock Out Status Ref Out (+6.3V) © 1990 Burr-Brown Corporation PDS-1060A Printed in U.S.A. December, 1993
At +25°C and rated power supplies, unless otherwise noted. ADC71J, K ADC71A, B MODEL MIN TYP MAX MIN TYP MAX UNITS RESOLUTION 16 16 Bits INPUTS ANALOG Voltage Ranges: Bipolar ±2.5, ±5, ±10 ±2.5, ±5, ±10 V Unipolar 0 to +5, 0 to +10, 0 to +5, 0 to +10, V 0 to +20 0 to +20 Input Impedance (Direct Input) 0 to +5V, ±2.5V 2.5 2.5 k Ω 0 to +10V, ±5.0V 5 5 k Ω 0 to +20V, ±10V 10 10 k Ω DIGITAL(1) Convert Command Positive pulse 50ns wide (min) trailing edge (“1” to “0” initiates conversion) Logic Loading 1 TTL Load TRANSFER CHARACTERISTICS ACCURACY Gain Error(2) ±0.1 ±0.2 ±0.1 ±0.2 % Offset(2): Unipolar ±0.05 ±0.1 ±0.05 ±0.1 % of FSR (3) Bipolar ±0.1 ±0.2 ±0.1 ±0.2 % of FSR Linearity Error: K, B ±0.003 ±0.003 % of FSR J, A ±0.006 ±0.006 % of FSR Inherent Quantization Error ±1/2 ±1/2 LSB Differential Linearity Error ±0.003 ±0.003 % of FSR POWER SUPPLY SENSITIVITY ±15VDC 0.003 0.003 % of FSR/%V S +5VDC 0.001 0.001 % of FSR/%V S CONVERSION TIME (4)
14 Bits 50 50 µs
WARM-UP TIME 5 * min DRIFT Gain ±10 ±15 * * ppm/ °C Offset: Unipolar ±2 ±4 ±2 ppm of FSR/ °C Bipolar ±8 ±10 ±5 ±10 ppm of FSR/ °C Linearity ±2 ±3 ±2 ppm of FSR/ °C No Missing Codes Temp Range J, A (13 Bits) 0 +70 –25 +85 °C K, B (14 Bits) 0 +70 –25 +85 °C OUTPUT DIGITAL DATA (All Codes Complementary) Parallel Output Codes(5): Unipolar CSB Bipolar COB, CTC (6) Output Drive 2 * TTL Loads Serial Data Code (NRZ) CSB, COB Output Drive 2 * TTL Loads Status Logic “1” During Conversion Status Output Drive 2 2 TTL Loads Clock Output Drive 2 2 TTL Loads Frequency(7) 280 * kHz Max External Current with No Degradation of Specs ±200 ±200 µA Temp Coefficient ±10 * ppm/ °C POWER SUPPLY REQUIREMENTS Power Consumption 655 655 mW Rated Voltage, Analog ±11.4 ±15 ±1 6 ***V D C Rated Voltage, Digital +4.75 +5 +4.75 * * * VDC Supply Drain +15VDC +10 +15 * * mA Supply Drain –15VDC –28 –35 * * mA Supply Drain +5VDC +17 +20 * * mA TEMPERATURE RANGE Specification 0 +70 –25 +85 °C Operating (Derated Specs) –25 +85 –55 +125 °C Storage –55 +125 –55 +125 °C (2) Adjustable to zero. (3) FSR means Full Scale Range. For example, unit connected for ±10V range has 20V FSR. (4) Conversion time may be shortened with “Short Cycle” set for lower resolution, see “Additional Connections Required” section. (5) See Table I. CSB = Complementary Straight Binary. COB = Complementary Offset Binary. CTC = Complementary Two’s Complement. (6) CTC coding obtained by inverting MSB (Pin 1).
ABSOLUTE MAXIMUM SPECIFICATIONS
PACKAGE INFORMATION
MODEL PACKAGE NUMBER (1) ADC71JG 32-Pin Hermetic DIP 172-5 ADC71KG 32-Pin Hermetic DIP 172-5 ADC71AG 32-Pin Hermetic DIP 172-5 ADC71BG 32-Pin Hermetic DIP 172-5 NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix D of Burr-Brown IC Data Book. Top View DIP
ORDERING INFORMATION
MODEL TEMPERATURE RANGE NONLINEARITY ADC71JG 0 °C to +70°C ±0.006% FSR ADC71KG 0 °C to +70°C ±0.003% FSR ADC71AG –25 °C to +85°C ±0.006% FSR ADC71BG –25 °C to +85°C ±0.003% FSR The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems. NOTE: (1) Metal lid of package is connected to pin 22 (Analog Common). Clock Reference 16-Bit D/A Converter (MSB) Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Bit 8 Bit 9 Bit 10 Bit 11 Bit 12 (LSB for 13 bits) Bit 13 (LSB for 14 bits) Bit 14 Bit 15 Bit 16 Short Cycle Convert Command +5VDC Supply Gain Adjust +15VDC Supply Comparator In Bipolar Offset 10V 20V Ref Out 6.3V Analog Common (1) –15VDC Supply Clock Out Digital Common Status Serial Out 6.3kΩ 16-Bit SAR Comparator 5kΩ 5kΩ
At +25°C and rated power supplies unless otherwise noted. FIGURE 1. Input vs Output for an Ideal Bipolar A/D NOTE: (1) See Table I for Digital Code Definitions. step over the range of the A/D converter is 1 LSB, ±1/2 LSB. ture range when short-cycled for 14-bit operation. to clock and valid data to status. mentary offset binary (COB) for bipolar input signal ranges. 14-bit resolution, parallel data output, with ±10V input.
external logic buffers are recommended. will allow operation to 85°C. FIGURE 10. θCA Requirement Above 85°C. NOTES: (1) Max conversion time to maintain specified nonlinearity error.