ACSC02-41SURKWA-F01 KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
Features
z 0.2INCH DIGIT HEIGHT. z LOW CURRENT OPERATION. z EXCELLENT CHARACTER APPEARANCE. z I.C. COMPATIBLE z MECHANICALLY RUGGED. z GRAY FACE,WHITE SEGMENT. z PACKAGE : 650PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG0275 REV NO: V.3 DATE: JUN/18/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000409 Selection Guide Note: 1. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. Typ. ACSC02-41SURKWA-F01 Hyper Red (InGaAlP) WHITE DIFFUSED 8000 30400 Common Cathode, Rt. Hand Decimal. Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 650 nm IF=20mA λD [1] Dominant Wavelength Hyper Red 635 nm IF=20mA Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG0275 REV NO: V.3 DATE: JUN/18/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000409 Hyper Red ACSC02-41SURKWA-F01
SPEC NO: DSAG0275 REV NO: V.3 DATE: JUN/18/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000409 ACSC02-41SURKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm)
SPEC NO: DSAG0275 REV NO: V.3 DATE: JUN/18/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1351000409 PACKING & LABEL SPECIFICATIONS ACSC02-41SURKWA-F01