AAT2608A SKYWORKS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 17

Technical content

Features

  • 1.5MHz Step-Down Converter ▪ 800mA, Externally Adjustable ▪ Synchronous with Integrated Switches ▪ Independent Enable ▪ Independent Input Power and Ground ▪ Operating Input Voltage Range of 2.7V to 5.5V
  • LDO1, LDO2, LDO3 and LDO4 Regulators Share Same Input as the Step-down Converter
  • LDO5 and LDO6 are Tied to the Same Input
  • LDO7 and LDO8 are Tied to the Same Input
  • LDO1, LDO7 and LDO8 have Adjustable Outputs with External Resistors
  • LDO2, LDO3, LDO4, LDO5 and LDO6 have Factory Programmed Outputs
  • All LDOs have: ▪ Independent Enable ▪ 300mA Current Capability ▪ High PSRR (68dB @10KHz) ▪ Low Ground Current (30µA) ▪ Over-Current Protection ▪ Over-Temperature Protection ▪ Operating Input Voltage Range from 2.7V to 5.5V
  • TQFN44-28 Package

Applications

  • Cellular Application
  • Handheld Products
  • Media Players (MP4 Players)
  • Portable Navigation Devices (PND)

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Typical Application AAT2608A VINBUCKVCC FBBUCK LDO1 LDO2 LDO3 LDO4 LDO5 LDO6 LDO7 LDO8 ENBUCK ENLD1 ENLD2 ENLD3 ENLD4 ENLD5 ENLD6 ENLD7 ENLD8 PGND P A A VLDO8 P A A A A A A A A FBLDO1 A A VLDO1 VLDO7 VLDO8 CLDO8 1µF VLDO7 CLDO7 1µF VLDO6 CLDO6 1µF VLDO5 CLDO5 1µF VLDO4 CLDO4 1µF VLDO3 CLDO3 1µF VLDO2 CLDO2 1µF VLDO1 VBUCK CLDO1 1µF CBUCK 22µF CINBUCK 10µF 2.2µH RLDO1 RLDO1 RLDO7 RLDO7 RBUCK RBUCK RLDO8 RLDO8 CVCC 2.2µF CVIN56 2.2µF CVIN78 2.2µF VIN56 A VIN78 A FBLDO7 A FBLDO8 A 2.7V to 5.5V 2.7V to 5.5V AGNDP LX

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Pin Descriptions Pin # Symbol Function 1 ENLD3 LDO3 enable; active high. 2 ENLD2 LDO2 enable; active high. 3 ENLD1 LDO1 enable; active high. 4 AGND Analog ground. 5 VCC Input to power control circuit for step-down converter, LDO1, LDO2, LDO3 and LDO4. 6 LDO1 LDO1 output voltage.

7 FBLDO1 Feedback pin for LDO1

8 LDO2 LDO2 output voltage. 9 LDO3 LDO3 output voltage. 10 LDO4 LDO4 output voltage. 11 LDO5 LDO5 output voltage. 12 LDO6 LDO6 output voltage. 13 LDO7 LDO7 output voltage. 14 FBLDO7 Feedback pin of LDO7. 15 FBLDO8 Feedback pin of LDO8. 16 LDO8 LDO8 output voltage. 17 VIN78 Input to LDO7 and LDO8. 18 VIN56 Input to LDO5 and LDO6. 19 ENLD8 LDO8 enable; active high. 20 ENLD7 LDO7 enable; active high. 21 ENLD6 LDO6 enable; active high. 22 VINBUCK Power input to the step-down converter input. 23 LX Switching node for step-down converter regulator. 24 PGND Power ground for step-down converter regulator. 25 ENLD5 LDO5 enable; active high. 26 ENLD4 LDO4 enable; active high. 27 ENBUCK Enable for step-down converter; active high. 28 FBBUCK Feedback input for step-down converter regulator. Pin Configuration TQFN44-28 (Top View) 89 10 28 27 26 25 24 23 22 11 12 13 14 ENLD3 ENLD2 ENLD1 AGND VCC LDO1 FBLDO1 LDO2 LDO3 LDO4 LDO5 LDO6 LDO7 FBLDO7 VIN56 ENLD8 VIN78 LDO8 FBLDO8 ENLD7 ENLD6 LX VINBUCK PGND ENLD5 ENLD4 ENBUCK FBBUCK

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions specified is not implied. Only one Absolute Maximum Rating should be applied at any one time. 2. Mounted on an FR4 board. Absolute Maximum Ratings1 Symbol Description Value Units VIN, VCC, VIN5/6, VIN7/8, ENBK1, ENLD1, ENLD2, ENLD3, ENLD4, ENLD5, ENLD6, ENLD7, ENLD8, FBLD1, FBLD7 and FBLD8, FB to GND -0.3 to 6.5 V LX to PGND -0.3 to VVIN + 0.3 V VOUT1, VOUT2, VOUT3, VOUT4 to GND -0.3 to VVCC + 0.3 VVOUT5, VOUT6 to GND -0.3 to VVIN5/6 + 0.3 VOUT7, VOUT8 to GND -0.3 to VVIN7/8 + 0.3 VPGND to GND -0.3 to +0.3 Thermal Information2 Symbol Description Value Units θJA Thermal Resistance 50 °C/W PD Maximum Power Dissipation 2 W TJ Operating Temperature Range -40 to 150 °CTS Storage Temperature Range -65 to 150 TLEAD Maximum Soldering Temperature (at leads, 10 sec) 300

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 1. Specification over the -40°C to +85°C operating temperature range is assured by design, characterization and correlation with statistical process controls. Electrical Characteristics1 VCC = VIN = VIN56 = VIN78 = VINLDO = 5.0V, -40°C ≤ TA ≤ +85°C, unless otherwise noted. Typical values are TA = 25°C. Symbol Description Conditions Min Typ Max Units Logic Control / Protection VENLDx VENBUCK Input High Threshold 1.4 V Input Low Threshold 0.3 V Step-Down Regulator VINBUCK, VCC Input Voltage Range 2.7 5.5 V IQ Quiescent Current IOUT = 0mA, device switching, all LDOs disabled 70 µA ISD Shutdown Current ENBK1 = GND 1 µA VO_STEP-DOWN Output Voltage Programmable Range Using external feedback resistors 0.6 80% of VIN V VREG Output Voltage Accuracy 0°C ≤ TA ≤ 85°C -3 +3 % ILIM P-Channel Current Limit 1000 mA TSTARTUP Startup Time From device enable to 90% of nominal output voltage 100 µs TRAMP Ramp-Up Time Time to ramp output voltage from 10% to 90% 60 µs RDS(ON)H High-Side Switch On-Resistance 260 mΩ RDS(ON)L Low-Side Switch On-Resistance 220 mΩ ΔVOUT / (VOUT ΔVIN) Line Regulation 0.2 %/V FOSC Oscillator Frequency 1.5 MHz UVLO Under-Voltage Lockout Threshold Falling 2 VRising 2.2 Low-Dropout Regulators (LDO1-LDO8) VINLDO Input Voltage Range 2.7 5.5 V VOUTx LDO Output Voltage ILDO = 1mA to 300mA, OTP per requirement 0.6 VINLDO - VDO V LDO Accuracy ILDO = 10mA -3 +3 % IQ LDO Quiescent Current VINLDO = 5V, added quiescent current when LDO is enabled 30 55 µA Line Regulation ILDO = 10mA 0.1 %/V Load Regulation ILDO = 1mA to 300mA 0.003 %/mA PSRR VINx = 5V, VOx = 1.8V, EN = HIGH, F = 10KHz, ILDO = 100mA 68 dB VDO Dropout Voltage ILDO = 250mA 250 500 mV ILDO(LIM) LDO Current Limit 300 mA Thermal TSD Over-Temperature Shutdown Threshold Rising 145 °C THYS Over-Temperature Shutdown Hysteresis 25 °C

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Programming Output Voltages via OTP Programmable Output Voltage Range Resolution Step-down1 0.6V 80% of VIN Externally Adjustable with 0.6V Internal Reference LDO1 0.6V Externally Adjustable with 0.6V Internal Reference LDO2 0.6V 3.7V 100mV per OTP bit LDO3 0.6V 3.7V 100mV per OTP bit LDO4 0.6V 3.7V 100mV per OTP bit LDO5 0.6V 3.7V 100mV per OTP bit LDO6 0.6V 3.7V 100mV per OTP bit LDO7 0.6V Externally Adjustable with 0.6V Internal Reference LDO8 0.6V Externally Adjustable with 0.6V Internal Reference

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Typical Characteristics−Step-Down (Buck) Converter Input Current vs. Input Voltage (Buck VOUT = 1.2V; Switching; All LDOs Disabled) Input Voltage (V) Input Current (µA) 100 Efficiency vs. Output Current (Buck VOUT = 1.8V) Output Current (mA) Efficiency (%) 100 10.11 0 100 1000 VIN = 2.7V VIN = 3.6V VIN = 4.2V VIN = 5.5V Load Regulation (Buck VOUT = 1.2V; COUT = 22µF) Output Current (mA) Load Regulation (%) 10.11 0 100 1000 -1.50 -1.00 -0.50 0.00 0.50 1.00 1.50 VIN = 2.7V VIN = 3.6V VIN = 4.2V VIN = 5.5V Load Transient (Buck VOUT = 1.2V; VIN = 3.6V; IOUT = 80mA to 800mA) Time (100µs/div) Output Voltage (50mV/div) (top) Output Current (500mA/div) (bottom) 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Line Regulation (Buck VOUT = 1.2V) Input Voltage (V) Line Regulation (%) -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 IOUT = 1mA IOUT = 10mA IOUT = 200mA IOUT = 400mA IOUT = 800mA Soft Start (Buck VOUT = 1.2V; VIN = 3.6V; IOUT = 100mA) Time (100µs/div) Enable Voltage (top) (1V/div) Output Voltage (middle) (1V/div) Input Current (bottom) (100mA/div) -0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Typical Characteristics−LDO1-LDO8 Input Current vs. Input Voltage (Contributed By Each LDO) Input Voltage (V) Input Current (µA) Load Regulation (LDO1 VOUT = 1.85V) Output Current (mA) Load Regulation (%) 10.11 0 100 1000 -0.10 -0.08 -0.06 -0.04 -0.02 0.00 0.02 0.04 0.06 0.08 0.10 VIN = 2.7V VIN = 3.6V VIN = 4.2V VIN = 5.5V Load Regulation (LDO2 VOUT = 2.6V) Output Current (mA) Load Regulation (%) 10.11 0 100 1000 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 VIN = 3.0V VIN = 3.6V VIN = 4.2V VIN = 5.5V Line Regulation (LDO1 VOUT = 1.85V) Input Voltage (V) Line Regulation (%) -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 IOUT = 1mA IOUT = 100mA IOUT = 150mA IOUT = 250mA IOUT = 300mA Line Regulation (LDO2 VOUT = 2.6V) Input Voltage (V) Line Regulation (%) -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 IOUT = 1mA IOUT = 100mA IOUT = 150mA IOUT = 250mA IOUT = 300mA

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Typical Characteristics−LDO1-LDO8 (continued) Output Voltage Error vs. Temperature (LDO1 VOUT = 1.85V; VIN = 3.6V) Temperature (°C) Output Voltage Error (%) 7550250-25-50 100 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 IOUT = 1mA IOUT = 250mA Output Voltage Error vs. Temperature (LDO2 VOUT = 2.6V; VIN = 3.6V) Temperature (°C) Output Voltage Error (%) 7550250-25-50 100 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 IOUT = 1mA IOUT = 250mA Load Transient (LDO1 VOUT = 1.85V; VIN = 3.6V; IOUT = 30mA to 300mA) Time (200µs/div) Output Voltage (50mV/div) (top) Output Current (200mA/div) (bottom) 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Load Transient (LDO2 VOUT = 2.6V; VIN = 3.6V; IOUT = 30mA to 300mA) Time (200µs/div) Output Voltage (20mV/div) (top) Output Current (200mA/div) (bottom) 2.50 2.52 2.54 2.56 2.58 2.60 2.62 2.64 2.66 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Power Supply Rejection Ratio (PSRR) (VIN(DC) = 5V; VOUT = 1.85V; IOUT = 100mA) Frequency (Hz) PSRR (dB) 100000010000010000100010010

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Functional Description The AAT2608A is a highly integrated voltage regulating power management unit for mobile handsets or other portable devices. It includes a 800mA switch-mode step- down converter and eight low-noise, high-PSRR low- dropout (LDO) regulators. It operates from an input voltage between 2.7V and 5.5V making it ideal for lithi - um-ion or 5V regulated power sources. All nine convert- ers have separate enable pins for ease of use. Synchronous Step- Down (Buck) Converter The AAT2608A switch-mode step-down converter is a constant frequency peak current mode PWM converter with internal compensation. The input voltage range is 2.7V to 5.5V. The output voltage range is 0.6V to 80% of VIN. The high 1.5MHz switching frequency allows the use of small external inductor and capacitor. Functional Block Diagram

1.5 MHz

N P P S S OTP Vref4 S S VCC Bias ENLD8 VIN78 LDO8 OTP Vref4 S S Bias VCC LDO1 ENLD1 VCC Thermal Shutdown Error Amp PWM Comparator

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 The step-down converter offers soft-start to limit the current surge seen at the input and eliminate output voltage overshoot. The current across the internal P-channel power switch is sensed and turns off when the current exceeds the current limit. Also, thermal protec - tion completely disables switching if internal dissipation becomes excessive, thus protecting the device from damage. The junction over-temperature threshold is 145°C with 25°C of hysteresis. The Buck converter is designed for a peak continuous output current of 800mA. It was designed to maintain over 80% efficiency at its maximum rated output cur - rent load of 800mA with a 1.2V output. Peak efficiency is above 90%. It also has excellent transient response, load and line regulation. Transient response time is typically less than 60ns. LDO Regulators The AAT2608A includes eight LDO regulators. The regu- lators operate from the 2.7V to 5.5V input voltage to a regulated output voltage. Each LDO regulator has its own independent enable pin. LDO regulators 1, 7 and 8 have adjustable output voltages set by resistors. LDO regulators 2 thru 6 have a fixed output programmed during manufacturing. Each LDO consumes 30µA of qui- escent current and is stable with a small 1.0μF ceramic output capacitor. These LDOs offer high power supply rejection, over-current protection and over-temperature protection. Feedback Resistor Selection The output voltage of the buck converter and LDOs 1, 7 and 8 is each set with an individual resistor divider feed- back network. The voltage output of the buck converter can be set between 0.6V and 80% of V IN. The voltage output of the LDOs can be set between 0.6V and V IN - VDO. VOUT is defined by the following equation: VOUT = 0.6V · 1 + To minimize the current consumed by the voltage divid- er and to isolate the FB pin from noise, the resistor val - ues for R1 and R2 should be beween 5kΩ and 500kΩ.

Application Information

Down (Buck) Converter The step-down converter uses peak current mode con - trol with slope compensation to maintain stability for duty cycles greater than 50%. The output inductor value must be selected so the inductor current down slope meets the internal slope compensation requirements. Table 1 displays suggested inductor values for various output voltages. Manufacturer’s specifications list both the inductor DC current rating, which is a thermal limitation, and the peak current rating, which is determined by the satura - tion characteristics. The inductor should not show any appreciable saturation under normal load conditions. Some inductors may meet the peak and average current ratings yet result in excessive losses due to a high DCR. Always consider the losses associated with the DCR and its effect on the total converter efficiency when selecting an inductor. Input Capacitor Select a 4.7μF to 10μF X7R or X5R ceramic capacitor for the input; see Table 3 for suggested capacitor compo - nents. To estimate the required input capacitor size, determine the acceptable input ripple level (VPP) and solve for CIN. The calculated value varies with input voltage and is a maximum when VCC is double the output voltage.

  • 1 - VO VIN CIN = VO VIN - ESR · FS VPP IO
  • 1 - = for VIN = 2 · VO VO VIN VO VIN CIN(MIN) = 1 - ESR · 4 · FS VPP IO Always examine the ceramic capacitor DC voltage coef - ficient characteristics when selecting the proper value. For example, the capacitance of a 10μF, 6.3V, X5R ceramic capacitor with 5.0V DC applied is actually about 6μF.

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 The maximum input capacitor RMS current is: IRMS = IO · · 1 - VO VIN VO VIN The input capacitor RMS ripple current varies with the input and output voltage and will always be less than or equal to half of the total DC load current. VIN VO VIN For VIN = 2 * VO IO RMSI 2= The term

  • 1 - VO VIN VO VIN appears in both the input voltage ripple and input capacitor RMS current equations and is a maximum when V O is twice V CC. This is why the input voltage ripple and the input capacitor RMS current ripple are a maximum at 50% duty cycle. The input capacitor provides a low impedance loop for the edges of pulsed current drawn by the AAT2608A step-down switching regulators. Low ESR/ESL X7R and X5R ceramic capacitors are ideal for this function. To minimize stray inductance, the capacitor should be placed as closely as possible to the IC. This keeps the high frequency content of the input current localized, minimizing EMI and input voltage ripple. A laboratory test set-up typically consists of two long wires running from the bench power supply to the evalu- ation board input voltage pins. The inductance of these wires, along with the low-ESR ceramic input capacitor, can create a high Q network that may affect converter performance. This problem often becomes apparent in the form of excessive ringing in the output voltage dur - ing load transients. Errors in the loop phase and gain measurements can also result. Since the inductance of a short PCB trace feeding the input voltage is significantly lower than the power leads from the bench power supply, most applications do not exhibit this problem. In applications where the input power source lead induc- tance cannot be reduced to a level that does not affect the converter performance, a high ESR tantalum or alu - minum electrolytic should be placed in parallel with the low ESR, ESL bypass ceramic. This dampens the high Q network and stabilizes the system. Output Capacitor The output capacitor limits the output ripple and pro - vides holdup during large load transitions. A 10μF to 22μF X5R or X7R ceramic capacitor typically provides sufficient bulk capacitance to stabilize the output during large load transitions and has the ESR and ESL charac - teristics necessary for low output ripple; see Table 2 for suggested capacitor components The output voltage droop due to a load transient is dominated by the capacitance of the ceramic output capacitor. During a step increase in load current, the ceramic output capacitor alone supplies the load current until the loop responds. Within several switching cycles, the loop responds and the inductor current increases to match the load current demand. The relationship of the output voltage droop during the several switching cycles to the output capacitance can be estimated by: COUT = 3 · ∆ILOAD VDROOP · FS Once the average inductor current increases to the DC load level, the output voltage recovers. The above equa- tion establishes a limit on the minimum value for the output capacitor with respect to load transients. The internal voltage loop compensation also limits the minimum output capacitor value to 10μF. This is due to its effect on the loop crossover frequency (bandwidth), phase margin, and gain margin. Increased output capac- itance will reduce the crossover frequency with greater phase margin. The maximum output capacitor RMS ripple current is given by: VOUT · (VIN(MAX) - VOUT) RMS(MAX)I L · FS · VIN(MAX) Dissipation due to the RMS current in the ceramic output capacitor ESR is typically minimal, resulting in less than a few degrees rise in hot-spot temperature.

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 LDO Regulators Input Capacitor Typically, a 1.0μF or larger ceramic capacitor is recom - mended for C VCC, CIN5/6, and C IN7/8 in most applications. The input capacitor should be located as close to the input (VCC/VIN5/6/VIN7/8) of the device as practically possible. CVCC, CIN5/6, and CIN7/8 values greater than 1.0μF will offer superior input line transient response and will assist in maximizing power supply ripple rejection. Output Capacitor For proper load voltage regulation and operational sta - bility, a capacitor is required between the LDOx and AGND pins. The C OUTx capacitor connection to the LDO regulator ground pin should be made as direct as prac - tically possible for maximum device performance. The AAT2608A's LDO regulators have been specifically designed to function with very low ESR ceramic capaci - tors. Although the device is intended to operate with these low ESR capacitors, it is stable over a very wide range of capacitor ESR, thus it will also work with higher ESR tantalum or aluminum electrolytic capacitors. However, for best performance, ceramic capacitors are recommended. Typical output capacitor values for maximum output cur- rent conditions range from 1μF to 10μF. Thermal Calculations There are three types of losses associated with the AAT2608A total power management solution (one step - down converter and eight LDO regulators): switching losses, conduction losses, and quiescent current losses. Conduction losses are associated with the RDS(ON) charac- teristics of the internal power switches/FETs of both of the stepdown regulators and the power loss associated with the voltage difference across the pass switch/FET of the four LDO regulators. Switching losses are dominated by the gate charge of the power output switching devic- es. At full load, assuming continuous conduction mode (CCM), a simplified form of the losses is given by the following (quiescent and switching losses are ignored, since conduction losses are so dominant): PB IOB 2 · (RDS(ON)H · VOB + RDS(ON)L · [VINB1 - VOB1]) VIN PLDO1 = ILDO1 · (VCC - VOL1) PLDO2 = ILDO2 · (VCC - VOL2) PLDO3 = ILDO3 · (VCC - VOL3) PLDO4 = ILDO4 · (VCC - VOL4) PLDO5 = ILDO5 · (VIN5/6 - VOL5) PLDO6 = ILDO6 · (VIN5/6 - VOL6) PLDO7 = ILDO7 · (VIN7/8 - VOL7) PLDO8 = ILDO8 · (VIN7/8 - VOL8) PLDO8 = ILDO8 · (VIN7/8 - VOL8) PTOTAL = PB + PLDO1 + PLDO2 + PLDO3 + PLDO4 + PLDO5 + PLDO6 + PLDO7 + PLL PB: Power dissipation of the DC-DC regulator IOB: Output current of the specific DC-DC regulator RDS(ON)H: Resistance of the internal high-side switch/FET RDS(ON)L: Resistance of the internal low-side switch/FET VOB: Output voltage of the DC-DC regulator VCC: Input voltage of the DC-DC regulator and LDOs 1 to PLDOx: Power dissipation of the specific LDO regulator ILDOx: Output current of the specific LDO regulator VIN5/6: Input voltage of regulators LDO5 and LDO6 VIN7/8: Input voltage of regulators LDO7 and LDO8 VOLx: Output voltage of the specific LDO regulator PTOTAL: Total power dissipation of the AAT2608A Since R DS(ON) and conduction losses all vary with input voltage, the dominant losses should be investigated over the complete input voltage range. Given the total con - duction losses, the maximum junction temperature (125°C) can be derived from the θ JA for the TQFN44-28 package which is 50°C/W. TJ(MAX) = PTOTAL · θJA + TA TJ(MAX) = PTOTAL · θJA + TA TJ(MAX): Maximum junction temperature PTOTAL: Total conduction losses ΘJA: Thermal impedance of the package TA: Ambient temperature

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Layout The suggested PCB layout for the AAT2608A is shown in Figures 4 and 5. The following guidelines should be used to help ensure a proper layout. 1. The input capacitors (C1, C2, C3, C4) should con - nect as closely as possible to VIN (Pin 22), VIN56 (Pin 18), VIN78 (Pin 17), and VCC (Pin 5), and AGND/PGND (Pins 4 and 24). 2. C13 (the step-down regulator output capacitor) and L1 should be connected as closely as possible. The connection of L1 to the LX pin should be as short as possible. 3. The feedback trace or FBx pin (Pins 7, 14, 15, and 28) should be separate from any power trace and connect as closely as possible to the load point. Sensing along a high current load trace will degrade DC load regulation. If external feedback resistors are used, they should be placed as closely as possible to the FBx pin (Pins 7, 14, 15, and 23) to minimize the length of the high impedance feedback trace. 4. The resistance of the trace from the load return to the PGND (Pins 24) should be kept to a minimum. This will help to minimize any error in DC regulation due to differences in the potential of the internal signal ground and the power ground. 5. For good thermal coupling, PCB vias are required from the pad for the TQFN44-28 exposed paddle to the ground plane. Manufacturer Part Number/ Type Inductance (μH) Rated Current (A) DCR (mΩ) (max) Size (mm) LxWxH TDK LTF5022 1.2 4.3 25 5x5.2x2.21.8 3.6 32 2.2 3.2 40 3.3 2.5 60 Wurth Electronik WE-TPC Type M 1 2.6 30 2.7 2.03 60 3.3 1.8 65 WE-TPC Type MH 1.2 2.8 20 4.8x4.8x2.8 1.8 2.45 25 2.2 2.35 28 2.7 1.95 30 3.3 1.8 35 Murata LQH55D 1 4 19 (typ) 5x5.7x4.71.5 3.7 22 (typ) 2.2 3.2 29 (typ) 3.3 2.9 36 (typ) Table 1: Suggested Inductor Components. Manufacturer Part Number Value Voltage Temp. Co. Case AVX 0603ZD105K 1μF 10 X5R 06030603ZD225K 2.2μF 10 TDK C1608X5R1E105K 1μF 25 X5R 0603C1608X5R1C225K 2.2μF 16 C1608X5R1A475K 4.7μF 10 C2012X5R1A106K 10μF 10 0805 C3216X5R1A226K 22μF 10 1206 Murata GRM188R61C105K 1μF 16 X5R 0603GRM188R61A225K 2.2μF 10 GRM219R61A106K 10μF 10 0805 GRM31CR71A226K 22μF 10 X7R 1206 Taiyo Yuden LMK107BJ475KA 4.7μF 10 X5R 0603 Table 2: Suggested Capacitor Components.

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 1. XYY = assembly and date code. 2. Sample stock is generally held on part numbers listed in BOLD. 3. The leadless package family, which includes QFN, TQFN, DFN, TDFN and STDFN, has exposed copper (unplated) at the end of the lead terminals due to the manufacturing process. A solder fillet at the exposed copper edge cannot be guaranteed and is not required to ensure a proper bottom solder connection.

Ordering Information

Package Marking1 Part Number (Tape and Reel)2 TQFN44-28 9RXYY AAT2608AINJ-1-T1 Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. Package Information3 TQFN44-28 4.000 ± 0.050 4.000 ± 0.050 Pin 1 Dot by Marking T op V iew 2.600 ± 0.050 2.600 ± 0.050 Bottom V iew Detail "A" 0.750 ± 0.050 0.050 ± 0.050

0.203 REF

0.400 ± 0.050 0.230 ± 0.050 0.430 ± 0.050 Pin 1 Indicator Detail "A" C0.3 All dimensions in millimeters.

Eight-Channel LDO with DC/DC Converter Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202207A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 25, 2012 Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Sky - works may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided here- under, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, IN - CLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or en- vironmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of pub- lished parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.