X10511 UNITEDAUTOMATION

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

YOU MUST READ THIS BEFORE INSTALLATION ELECTRICAL SAFETY INSTALLATION REQUIREMENTS USER RESTRICTIONS USAGE ENVIRONMENT HOT SURFACE WARNING WARNING: RISK OF ELECTRIC SHOCK Always consult the Installation & Maintenance Instructions before connecting this product to the power supply. WARNING: Disconnect Power Before Servicing Ensure the electrical supply is safely disconnected before connecting to any supply, load, or control terminals. WARNING: Installation by Qualified Personnel Only This product must only be installed or fitted by a competent, qualified installer familiar with the relevant electrical standards and installation practices. WARNING: Not for Use by Vulnerable Individuals This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a person responsible for their safety. WARNING: Industrial Use Only This is an industrial-grade product and is not intended for household use. WARNING: Hot Surfaces On certain models, surfaces marked with this symbol become hot during use. Avoid direct contact and follow all thermal safety precautions. More Info: https://united-automation.com/general-product-safety-regulation-gpsr/

6 October 2025 | Issue: 4 Page 1 of 2

16A, 110V / 230V Burst Fired Flicker Inhibited 0044 (0) 1704-516 501 enquiries@united-automation.com www.united-automation.com CONTACT US: KEY FEATURES: The ZVT-16-IF Burst Fired Flicker Inhibited 16A Temperature Controller is an economical, energy-saving OEM controller designed for precision temperature management. It combines advanced microprocessor-based control with powerful output in a compact single-hole fixing enclosure. Unlike conventional thermostats, it switches energy down to half mains cycle packets at zero voltage, significantly reducing mains-borne RFI interference and flicker. With proportional self-adjustment, the ZVT-16-IF ensures accurate temperature control of loads up to 16A, provided the installation uses appropriate heatsinking (see cooling requirements). Supplied with a control knob and ZVT scaled dial (0–40°C or 0–150°C), it offers reliable performance for demanding OEM heating applications. Note: The NTC temperature sensor is ordered separately and must always be installed with a bonded earth for safe operation.  Microprocessor-Based Control – Ensures precision sensing and stable performance.  Flicker Inhibited – Reduces mains flicker and improves power quality.  Simple Installation – Compact design allows for easy mounting with or without heatsink.  Dual Voltage & Temperature Ranges – Available in 110V AC and 230V AC versions with control ranges of 0–40°C or 0–150°C.  High Reliability – Discrete component design provides durability and long service life.  Supplied with Control Knob & Dial – Linear adhesive-backed scale for user-friendly operation. TECHNICAL SPECIFICATIONS Maximum RMS On-State Current 16A Peak Single Cycle Surge Current 200A I²t for Fusing 128 A²s Maximum Line Voltage (ZVT1) 110V AC ±10% @ 50/60Hz Maximum Line Voltage (ZVT2) 230V AC ±10% @ 50/60Hz Maximum Power Consumption 6W Temperature Control Range 0–40°C / 0–150°C Isolation Voltage (Typical) 2500V rms Proportional Band (Rear Screw Adjust, Typical) 1–15% Operating Temperature Range 0°C to +65°C Storage Temperature Range 0°C to +65°C Control Stability (Typical) 1% Weight 125g NTC Sensor Must be earthed Further Dimensions Shaft Diameter 6.3mm (1/4 inch) Shaft Projection from Bush 13.0mm Bush Length 7.0mm Fixing Hole Diameter 10.0mm Maximum Cable Entry (c.s.a.) 2.5mm² Scale Label Dimensions 54 x 46mm (linear, adhesive-backed) APPLICATIONS: The ZVT-16-IF is suitable for a wide range of single-phase resistive heating applications, including: Ovens, Dryers, Hot plates, Flexible heater mats and General temperature control of single- phase resistive heaters.

X10817 Temperature Controllers ZVT-16-IF 16A, 110V / 230V Burst Fired Flicker Inhibited BMF House - Wight Moss Way, Southport Business Park Southport PR8 4HQ ENGLAND, UNITED KINGDOM Contact Us:  0044 (0) 1704-516 501  enquiries@united-automation.com  www.united-automation.com unitedautomationltd UA_Limited 6 October 2025 | Issue: 5 Page 2 of 2 INSTALLATION INSTRUCTIONS COOLING REQUIREMENTS: Stainless steel typically 15 times less thermally conductive and mild steel which is typically 5 times less thermally conductive RECOMMENDATIONS FUSING A semiconductor, fast acting type fuse, is supplied as standard for unit protection. On initial operation, some loads may need an increased Factor of Safety (F of S) for unit and/or device protection. For spares or replacements contact our sales desk. DOCUMENTS Other documents available on request, which may be appropriate for your application: Code Identity Description X10229 RFI Filter recommendations: Addressing the EMC Directive X10213 ITA Interaction: Uses for phase angle and for burst fire control X10255 SRA Safety Requirements: Addressing the Low Voltage Directive (LVD) including, Thermal Data/Cooling, Live Parts Warning, Earthing Requirements and Fusing Recommendations X10612 ZVT-E-IF-10K3A1 ZVT enclosed flicker inhibited NTC sensor installation sheet P01.1 COS UAL Conditions of Sale It is recommended that installation and maintenance of this equipment should be done with reference to the current edition of the I.E.T. regulations (BS7671) by suitably qualified/trained personnel. The regulations contain important requirements regarding the safety of electrical equipment. For International standards, refer STANDARDS on D of C. OPTIONAL EXTRAS Product Code Product Description A26036 ZVT-E-IF-10K3A1 Enclosed, inhibited flicker sensor Z01062 Heatsink compound PRODUCT CODE AND RELATED PRODUCT CODE Product Code Product Description A26227 ZVT1-16-IF (0-150ºC) 110V Burst fire, Flicker inhibited, Temperature Controller A26228 ZVT2-16-IF (0-150ºC) 230V Burst fire, Flicker inhibited, Temperature Controller A26230 ZVT1-16-IF (0- 40ºC) 110V Burst fire, Flicker inhibited, Temperature Controller A26231 ZVT2-16-IF (0- 40ºC) 230V Burst fire, Flicker inhibited, Temperature Controller