A1101R08C_V01 ANAREN

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

1101 Series

The A1101R08C is a high-performance, ETSI-compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver, all in the industry’s smallest package: 9 x 12 x 2.5mm.

A1101R08C

Features  Frequency range: 868-870 MHz  ETSI-compliant, shielded package  Digital RSSI output  Programmable output power up to +10dBm  High sensitivity (1.2 kBaud, 1% packet error rate) -112 dBm at 869 MHz (compliant to ETSI)  Ultra-small package size: 9 x 12 x 2.5mm  Industry-standard U.FL connector  LGA footprint  RoHS compliant  Operating temperature -40 to +85˚C  Impedance-controlled, multi-layer PCB  1.8 to 3.6 VDC  Low current consumption (15 mA in RX, 1.2 kBaud, 868 MHz)  200 nA sleep mode current consumption  Efficient SPI interface; all registers can be programmed with one “burst” transfer  Available in tape & reel and matrix tray  Module weight approximately 0.4 grams Benefits  Minimal RF engineering experience necessary  No additional “Intentional Radiator” certification required (ETSI EN 300 220)  Minimal real estate required  Easily implemented on a two layer PCB  No additional harmonic filtering required  100% RF-tested in production  Common footprint for similar products in family  No additional DC decoupling required  Integrated analog temperature sensor  Excellent receiver selectivity and blocking performance  Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 μs settling time  Impedance-matched balun for optimized efficiency  Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols PLEASE NOTE: Additional information on the Texas Instruments CC1101 device can be found in the company’s latest datasheet release at http://www.ti.com
Block diagram
This product is not to be used in any implantable medical device or external medical device intended to regulate or monitor biological functions, including but not limited to devices such as pacemakers, defibrillators, cardiac resynchronization devices, pressure sensors, biochemical stimulators and neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE. Anaren shall not be responsible for any consequential damages arising from the sale or use of this product for any use of this type. The ultimate user of the product assumes all risk of personal injury or death arising from a prohibited use.
PDF page 1 diagram

The item described in this product brief is part of our total AIR Support solution. To learn more, visit our website or just ask us!

Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057 800.411.6596 | www.anaren.com | AIR@anaren.com

Page 2

PDF page 2 diagram
PDF page 2 diagram
Product overview The A1101R08C is a high-performance, ETSI- compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 12 x 2.5mm) and is compatible with all TI- approved software stacks. With an LGA pad footprint and industry-standard U.FL button connector receptacle, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. The A1101R08C has an RoHS-compliant ENIG finish and is packaged on tape & reel or in matrix trays for high-volume automated manufacturing. Layout Information Top 2 pads optional for compatibility with other modules. Refer to User’s Manual for additional layout guidelines. Dimensions in mm. Footprint (PWB) Ground detail (corner) Ground detail (edge)
Pin diagram Viewed from top side NC = “NO Connection” Pin is NOT connected internally. DNC = “Do Not Connect” Pin reserved for internal use, ensure mating footprint pads are isolated. GND = “Ground” Connect the maximum number possible (minimum one for proper operation). Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage.
Nomenclature A (Anaren) 1 Chip series (CC1101, CC110L, CC2500) 2 Function (R = radio only) 3 Frequency band (x100MHz) 4 Form factor (A = Internal Antenna, C = Connector) 5 Design ID (00 = Default) 6 Application (G = General) 7 Packaging (R = Tape/Reel, M = Matrix Tray)

For more information

The item described in this

see product User’s

product brief is part of our total

Manual, available

AIR Support solution. To learn

online.

more, visit our website or just ask us!

1308a

Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057 800.411.6596 | www.anaren.com | AIR@anaren.com