96DW YUANDEAN

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

4：1 Input Voltage Range Single & Dual Output 2” x 2” Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Part Number Input Voltage Input Current Output Voltage Output Current Efficiency Vdc No Load (mA TYP) Full Load (mA TYP) Vdc Full Load (mA) %TYP 96DW-24S03RNL 9-36 25 1103 3.3 6500 81 96DW-24S05RNL 9-36 25 1524 5 6000 82 96DW-24S12RNL 9-36 25 1524 12 2500 82 96DW-24S15RNL 9-36 25 1524 15 2000 82 96DW-48S03RNL 18-72 20 545 3.3 6500 82 96DW-48S05RNL 18-72 20 753 5 6000 83 96DW-48S12RNL 18-72 20 753 12 2500 83 96DW-48S15RNL 18-72 20 753 15 2000 83 96DW-24D05RNL 9-36 25 1524 ±5 ±3000 82 96DW-24D12RNL 9-36 25 1524 ±12 ±1250 82 96DW-24D15RNL 9-36 25 1524 ±15 ±1000 82 96DW-48D05RNL 18-72 20 753 ±5 ±3000 83 96DW-48D12RNL 18-72 20 753 ±12 ±1250 83 96DW-48D15RNL 18-72 20 753 ±15 ±1000 83 YUAN DEAN SCIENTIFIC YUAN DEAN SCIENTIFIC CO.,LTD Rev:0 2018/10/31 96DW SERIES Temperature Derating Graph Input Specifications Parameters Conditions Min Typ Max Units Voltage Types 4:1 Filter Pi Network Protection Fuse Recommended FEATURES ：

30 Watt DIL Package

4:1Wide Input Voltage 100% Burned In High Efficiency To 83% Customized Solutions Available Operating Temperature:-40℃ TO +87℃

3 Years Warranty

Parameters Conditions Min Typ Max Units Isolation Resistance 500Vdc 1000 MΩ Switching Frequency 270 KHz Operating Temperature -40 87 ℃ Humidity Non Condensing 95 % Cooling Natural Convection (20LFM) Case material Nickel Coated with Non-Conductive Base Weight 65 g Dimensions 51.0X51.0X10.3 mm Potting Material Epoxy (UL94V-0 rated) Radiated Emissions EN55022 CLASS A Conducted Emissions EN55022 CLASS A Isolation Voltage For 10 seconds 3000 VDC MTBF MIL-HDBK-217F @25℃ , Ground Benign 400000 Hours Storage Temperature -55 +125 ℃ Case Temperature +105 ℃ Isolation Capacitance 2500 pF Recommended Test Circuit 96DW SERIES YUAN DEAN SCIENTIFIC CO.,LTD Rev:0 2018/10/31 Part Number Output Specifications Parameters Conditions Min Typ Max Units Voltage Tolerance Full load@Vin(nom.) ±2 % Short Circuit / Restart Protection Hiccup, automatic recovery Over Load Protection 150 % Line Regulation Single & Dual (H/L to L/L) ±0.5 % Load Regulation Single & Dual, Balance Load (F.L-50%F.L) ±0.5 % Cross Regulation Dual (25% to 100% load) ±5 % Ripple & Noise BW=DC To 20MHz (with 1uF Cap.) 100 mVp-p Transient response setting time 25% load step change 350 us External Trim Adj. Range ±10% of Output Voltage +Vin -Vin +Vout -Vout DC/DC Converter Load L 12V: C1 =330uF/100V L=12uH C3=N/A 24V.48V: C1=220uF/100V 12V: C2 =100uF/100V L=12uH 24V.48V: C2 =100uF/100V 24V: C3=N/A 48V: C3=1000pF/2KV Suggest adding input external filter(C1,C2,L) to meet conducted emissions (EN55022 class A) requirement for the module . These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise.

Single +Vin -Vin No Pin Remote On/Off No Pin +Vout -Vout Trim Dual +Vin -Vin No Pin Remote On/O ff +Vout Com -Vout Trim 96 DW SERIES YUAN DEAN SCIENTIFIC CO.,LTD Rev:0 2018/10/31