95V857 RENESAS

Document overview

  • Manufacturer or author: mreed
  • PDF pages: 14

Technical content

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Th ese ratings are stress specifications only and functional operation of the device at these or any other conditions above those listed in the operational sections of the specifications is not impl ied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Electrical Characteristics - Input/Supply/Common Output Parameters TA = 0 - 85°C; Supply Voltage Avoo, Voo = 2.5V ± 0.2V PARAMETER SYMBOL CONDITIONS MIN TY P Input High Current l1H V1 = Voo or GND 5 Input Low Current l1L V1 = Voo or GND Operating Supply I002.s CL = 0pf @ 200MHz 148 Current looPD CL = 0pf Output High Current loH Voo = 2.3V, Vwr = 1V -18 -3 2 Output Low Current loL Voo = 2.3V, Vwr = 1.2V 26 35 High Impedance 1oz V00= 2.7V, Vout= V00 or GND Cutout Current Input Clamp Voltage V1K Vooa = 2.3V lin = -18mA Voo = min to max, Vooo-0 .1 High-level output VoH loH = -1 mA voltage Vooa = 2.3V, 1.7 loH = -1 2 mA Voo = min to max Low-level output voltage VoL loL=1 mA Vooa = 2.3V loH=12 mA lnout Caoacitance1 C1N V1 = GND or Voo 3 Out out Caoacitance 1 Cour Vour = GND or Voo 3 1Guaranteed by design at 22 0MHz, not 100% tested in production. 06745- 3/3/2015 MAX UNITS µA 5 µA 17 0 mA 100 µA mA mA ±10 mA -1.2 V V V 0.1 V 0.6 V pF pF

TA= O - 85°C; Supply Voltage Avoo, V00 = 2.5 V +/- 0.2V (unless otherwise stated) PARAMETER SYMBOL CONDITIONS MIN MAX UNITS Max clock frequency freq0p 2.5V±0.2V@ 25°C 45 233 MHz Application Frequency freqApp 95 220 MHz Range 2.5V±0.2V@ 25°C Input clock duty cycle dtin 40 60 % CLK stabilization TsTAB 15 µs Switching Characteristics (see note 3) PARAMETER SYMBOL CONDITION MIN TYP MAX UNITS Low-to high level tPLH

1 CLK_I N to any output propaqation delay time

High-to low level propagation tPLL

1 CLK_I N to any output delav time

Output enable time tEN PD# to any output Output disable time tdis PD# to any output Period jitter T;;1 loerl 100MHz to 200MHz Half-period jitter tOit hper) 100MHz to 200MHz Input clock slew rate tsllil Output clock slew rate tsllol Cvcle to Cvcle Jitter1 Tcvc-Tcvc 100MHz to 200MHz Static Phase Offset tr static nhase ottsetl Output to Output Skew Tskew Notes: 1. Refers to transition on noninv erting output in PLL bypass mode. -30 -75 -50 -50 2. While the pulse skew is almost constant over frequency, the duty cycle error increases at higher frequen cies. This is due to the formula: duty cycle=twHltc, where the cycle (tc) decreases as the frequency goes up. 3. Switching characteristics guaranteed for application frequency range. 4. Static phase offset shifted by design. 06745- 3/3/2015 3.5 ns 3.5 ns 3 ns 3 ns 30 ps 75 PS

4 V/ns

2 V/ns

N SYMBOL COMMON DIMENSIONS COMMON DIMENSIONS INDEX AREA a aaa C 6.10 mm. Body, 0.50 mm. pitch TSSOP (240 mil) (0.020 mil) MIN MAX A -- 1.20 A1 0.05 0.15 A2 0.80 1.05 b 0.17 0.27 C 0.09 0.20 D SEE VARIATIONS E 8.10 BASIC E1 6.00 6.20 e 0.50 BASIC L 0.45 0.75 N SEE VARIATIONS a oo 80 aaa -- 0.10 VARIATIONS N Dmm . MIN I MAX 48 12.40 I 12.60 RelererceDoc.: JEDEC Ptblication95. M0-153 10-0039

Ordering Information

XXXX y G z (LF} - T l T LDesignation for tape and reel packaging Blank= 0°C to + 70°C (Commercial) I = -40°C to +85°C (Industrial) G =TSSOP Example: 95V857 AG LF-T 06745- 3/3/2015 MIN MAX -- .047 .002 .006 .032 .041 .007 .011 .0035 .008 SEE VARIATIONS

0.319 BASIC

.236 .244

0.020 BASIC

.018 .030 SEE VARIATIONS oo 80 -- .004 D (inch) MIN I MAX .488 I .496

I.. [Q]-----►1 Anvil Singulation -or­ Sawn Singulation THERMALLY ENHANCED, VERY THIN, FINE PITCH QUAD FLAT /NO LEAD PLASTIC PACKAGE Thermal Base ALL DIMENSIONS IN MILLIMETERS N 40 No 10 NE 10 D x E BASIC 6.00 X 6.00 D2 MIN./ MAX. 2.75 I 3.05 E2 MIN. / MAX. 2.75 I 3.05 L MIN./ MAX. 0.30 I 0.50 Source Reference: MLF2 nsE 10-0053 SYMBOL MIN. MAX. A 0.80 1.00 A1 0 0.05 A3 0.25 Reference b 0.18 0.30 e 0.50 BASIC Example: K< T Designation for tape and reel packaging Lead Free (Optional} Package Type K=MLF ----- Revision Designator (will not correlate with datasheet revision) Device Type 95V857 AKLF-T 06745- 3/3/2015

© 202 Renesas Electronics Corporation. All rights reserved. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use o any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. ('LVFODLPHURev.1.0 Mar 2020) Corporate Headquarters Contact Information TOYOSU FORESIA, 3-2-24 Toyosu, For further information on a product, technology, the most Koto-ku, Tokyo 135-0061, Japan up-to-date version of a document, or your nearest sales www.renesas.com office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.