DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ Cellular (2G/3G) Screw Antenna 10/2019 Page 1 IRIDIUM/ GNSS (GPS/GLONASS)/ Cellular (2G/3G) Screw Antenna For use in telematic applications Low profile (69mm height ) Mounting on several surfaces (e.g. plastic, metal, …) Customization of cable lengths, types and connectors possible HIRSCHMANN MOBILITY IGNC 8521 SF S/series Pt. nos. 956-310-5.. ¹ Other cable lengths available upon request ² Other configurations available upon request ³ dBic: referenced to an isotropic radiator, circular polarization 1. Technical data Dimensions 124mm x 80mm x 69mm Weight 200 g Temperature range -40°C to +85°C Protection class IP66 (acc. IEC 60529) IRIDIUM Frequency range 1616 - 1626.5 MHz Impedance 50 Ohm VSWR ≤ 1.8 Gain 3 dBic³ Polarization RHCP Axial ratio < 4 dB Load capacity 8 W Lightning protection DC grounded GNSS (GPS/GLONASS) Frequency range 1.575 - 1.61 GHz Impedance 50 Ohm Gain 2 dBic min.³ Amplification 26 ± 2 dB typ. Noise figure (50 Ohm) ≤ 1.4 dB typ. Im Voltage supply 3 V - 5.5 V Current consumption ≤ 13mA at 5 V ± 0.5 V (typ. 10mA) Cellular Frequency range 824-2170 MHz (AMPS / GSM800 through UMTS) Gain Typ. ≥ 3 dBi Load capacity Max. 10W pulsed Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ Cellular (2G/3G) Screw Antenna 10/2019 Page 2 2. Product Family Cable (length) Connector (type) IRIDIUM GNSS Cellular IRIDIUM GNSS Cellular Remark Versions L1 L2 L3 C1 C2 C3 956-310-501 200 mm 170 mm 140 mm SMA m SMA m SMA m Cable RG174, ROHS 956-310-502 2000 mm 2000 mm 2000 mm SMA m SMA m SMA m Cable RG174, ROHS 956-310-503 600 mm 570 mm 540 mm SMA m SMA m SMA m Cable RG174, ROHS Customization of cable lengths, types and connectors possible. Order code IRIDIUM/ GNSS (GPS/GLONASS)/ CELLULAR (2G/3G) SCREW ANTENNA IGNC 8521 SF S/series Pt. nos. 956-310-5.. 3. Technical Drawing Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ Cellular (2G/3G) Screw Antenna 10/2019 Page 3 4. Mounting example and procedure Vehicle roof mounting Mounting requirements and restrictions Choose appropriate mounting location on flat surface (see Sketch #1) . Max. tolerable mounting material thickness 10 mm/ 0.4 in. Safely drill 15 mm/ 0.6 in. mounting hole at desired location (see Sketch #2) Clean mounting area with isopropyl alcohol or similar. Unscrew mounting nut (see Sketch #3) Feed all cables through mounting hole (see Sketch #4) Slide slotted mounting nut over cables and screw back on to antenna mounting stud. Maximum tightening torque is 5Nm. Sketch #2—Required Mounting hole Sketch #4—Mount in hole Sketch #1—Select Mounting Location www.te.com/hirschmann-mobility hirschmann-mobility@te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. IRIDIUM, GSM, UMTS and GLONASS are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes onl y, is believed to be reliable. However, TE Connectivity makes no warranties as to its accu racy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligat ions shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2019 TE Connectivity Ltd. family of companies All Rights Reserved. 27.2 mm Sketch #3—Mounting Nut IRIDIUM/ GNSS (GPS/GLONASS)/ CELLULAR (2G/3G) SCREW ANTENNA IGNC 8521 SF S/series Pt. nos. 956-310-5.. Subject to alterations