956-310-3XX TEC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS) Screw Antenna 10/2019 Page 1
- For use in telematic applications
- Low profile (19mm height )
- Mounting on several surfaces (e.g. plastic, metal, …)
- Customization of cable lengths, types and connectors possible HIRSCHMANN MOBILITY IRIDIUM/ GNSS (GPS/GLONASS) Screw Antenna IGN 1620 LP S/series Pt. no. 956-310-3.. 1. Technical data Dimensions 124mm x 80mm x 21mm Weight 200 g Temperature range -40°C to +85°C Protection class IP66 (acc. IEC 60529) IRIDIUM Frequency range 1616 - 1626.5 MHz Impedance 50 Ohm VSWR ≤ 1.8 Gain 3 dBic3 Polarization RHCP Axial ratio < 4 dB Load capacity 8 W Lightning protection DC grounded GNSS(GPS / GLONASS) Frequency range 1575 - 1614 MHz Impedance 50 Ohm Gain 2 dBic min.³ Amplification 26 ± 3 dB typ. Noise figure (50 Ohm) ≤ 1.4 dB typ. Voltage supply 3 V - 5.5 V Current consumption ≤ 13 mA at 5 V ± 0.5 V ¹ Other cable lengths available upon request ² Other configurations available upon request ³ dBic: referenced to an isotropic radiator, circular polarization Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS) Screw Antenna 10/2019 Page 2 IRIDIUM/ GNSS (GPS/GLONASS) SCREW ANTENNA IGN 1620 LP S/series Pt. no. 956-310-3.. * Connectors shown: SMAm 19 mm Slotted nut slides over cable. 80 mm 124 mm 2. Product Family Order Code Cable (length) Connector (type) Remark Versions IRIDIUM GNSS IRIDIUM GNSS IRIDIUM / GNSS L1 L2 C1 C2 956-310-301 200 mm 170 mm SMA male SMA male Cable RG174, ROHS 956-310-302 200 mm 170 mm SMA female SMA female Cable RG174, ROHS Customization of cable lengths, types and connectors possible. 3. Technical Drawings Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS) Screw Antenna 10/2019 Page 3 4. Mounting example and procedure Vehicle roof mounting Mounting requirements and restrictions
- Choose appropriate mounting location on flat surface (see Sketch #1) .
- Max. tolerable mounting material thickness 10 mm.
- Safely drill 15 mm mounting hole at desired location (see Sketch #2)
- Clean mounting area with isopropyl alcohol or similar.
- Unscrew mounting nut (see Sketch #3)
- Feed all cables through mounting hole (see Sketch #4)
- Slide slotted mounting nut over cables and screw back on to antenna mounting stud.
- Maximum tightening torque is 5Nm. IRIDIUM/ GNSS (GPS/GLONASS) SCREW ANTENNA IGN 1620 LP S/series Pt. no. 956-310-3.. Sketch #1 - Select Mounting Location Sketch #2 - Required Mounting hole Sketch #4 - Mount in hole Slotted nut slides over cable. www.te.com/hirschmann-mobility hirschmann-mobility@te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. IRIDIUM and GLONASS are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity ‘s obligations shall only be as set forth in TE Connectivity ‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or c onsequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2019 TE Connectivity Ltd. family of companies All Rights Reserved. 27.2 mm Sketch #3—Mounting Nut Subject to alterations