955-162-XXX TEC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/ Bluetooth (2.4GHz) Screw Antenna 10/2019 Page1 CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/Bluetooth (2.4GHz) Screw Antenna
- Low current consumption
- Ground plane independent
- For vertical installation HIRSCHMANN MOBILITY CGNW 852124 LP S/series Pt. no. 955-162-... 1. Technical data ¹ Other cable lengths available upon request ² Other configurations available upon request ³ dBic: referenced to an isotropic radiator, circular polarization Dimensions 162mm x 70mm x 22mm Weight approx. 230 g including mounting nut Temperature range -40 to +85 °C Protection class Braided sleeve option Cellular Frequency range 824 to 960 and 1710 to 2170 MHz (GSM 850/900/1800/1900), UMTS VSWR 3.0:1 max Gain typ.2 dBi Load capacity GPS/GLONASS Frequency range 1575 - 1614 MHz. Impedance 50 Ω Gain typ. 2 dBic³ Amplification typ. 15 dB, 20dB max. Noise figure (50 Ohm) 2.0 dB max Voltage supply 2.7 V - 5.5 V DC Current consumption ≤ 6 mA@5 V WLAN + BLUETOOTH Frequency Range 2400 - 2484 MHz Gain typ. 5 dBi Polarization Linear VSWR 2.0:1 max Impedance 50 Ω Power Rating 100 mWmin. Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/ Bluetooth (2.4GHz) Screw Antenna 10/2019 Page2 CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/ BLUETOOTH (2.4GH Z) SCREW ANTENNA 2. Product Family Order code Cable length¹ Connector type ² Remark CELLULAR GNSS WLAN CELLULAR GNSS WLAN Versions L1 L2 L3 C1 C2 C3 Cell/GNSS/WLAN 955-162-001 2200mm ± 20mm 2200mm 2200mm FAKRA D f FAKRA C f BLUE FAKRA B f WHITE RG58LL/RG74LL/RG174LL Customization of cable lengths and connectors possible. 70.4mm 162.4mm 3. Technical Drawings Subject to alterations
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/ Bluetooth (2.4GHz) Screw Antenna 10/2019 Page3 4. Mounting example and procedure Vehicle roof mounting Mounting requirements and restrictions
- Choose appropriate mounting location on flat surface (see Sketch #1).
- Max. tolerable mounting material thickness 10 mm.
- Safely drill 15 mm mounting hole at desired location (see Sketch #2).
- Clean mounting area with isopropyl alcohol or similar.
- Unscrew mounting nut.
- Feed all cables through mounting hole.
- Slide slotted mounting nut over cables and screw back on to antenna mounting stud.
- Maximum tightening torque is 5Nm. Sketch #2—Required Mounting hole Sketch #1 - Select Mounting Location www.te.com/hirschmann-mobility hirschmann-mobility@te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. GSM, UMTS, GLONASS and FAKRA are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity ‘s obligations shall only be as set forth in TE Connectivity ‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or c onsequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2019 TE Connectivity Ltd. family of companies All Rights Reserved. Max. Ø 19 ± 0.2 mm CELLULAR (2G/3G)/ GNSS (GPS/GLONASS)/ WLAN/ BLUETOOTH (2.4GH Z) SCREW ANTENNA Subject to alterations