955-056-XXX TEC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4GHz) Screw Antenna 10/2019 Page 1 HIRSCHMANN MOBILITY IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4 GHz) Screw Antenna IGNW 24 LP S/series Pt. nos. 955-056-... 955-066-...

  • For use in telematic applications
  • Low profile (19mm height )
  • Mounting on several surfaces (e.g. plastic, metal, …)
  • Customization of cable lengths, types and connectors possible ¹ Other cable lengths available upon request ² Other configurations available upon request ³ dBic: referenced to an isotropic radiator, circular polarization 1. Technical data Dimensions 124mm x 80mm x 21mm Weight 200 g Temperature range -40°C to +85°C Protection class IP66 (acc. IEC 60529) IRIDIUM Frequency range 1616 - 1626.5 MHz Impedance 50 Ohm VSWR ≤ 1.8 Gain 3 dBic³ Polarization RHCP Axial ratio < 4 dB Load capacity 8 W Lightning protection DC grounded GNSS (GPS/ GLONASS) Frequency range GPS: 1.57542 GHz + 1.023 MHz (L1-band) GLONASS: 1602.0 - 1614.94 MHz Impedance 50 Ohm Gain 2 dBic min.³ Amplification 26 ± 2 dB typ. Noise figure (50 Ohm) ≤ 1.4 dB typ. Voltage supply 3 V - 5.5 V Current consumption ≤ 13 mA at 5 V ± 0.5 V (typ. 10mA) WLAN (optional) Frequency range Bluetooth: 2400 - 2484 MHz IEEE Std. 802.11b: 2412 - 2484 MHz Impedance 50 Ohm Gain 0 dB Return loss > 12 dB Load capacity Max. 1 W (acc. IEEE 802.11b) Subject to alterations

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4GHz) Screw Antenna 10/2019 Page 2 IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4GHZ) SCREW ANTENNA 2. Product Family Cable (length) Connector (type) Order code IRIDIUM GNSS WLAN IRIDIUM GNSS WLAN Remark Versions L1 L2 L3 C1 C2 C3 955-056-001 200 mm 170 mm 140 mm SMA male SMA male SMA male Cable RG174, ROHS, nut wrench 27mm 955-066-001 200 mm 170 mm 140 mm SMA male SMA male SMA male Cable RG174, ROHS, nut wrench 22mm Customization of cable lengths, types and connectors possible. * Connectors shown: SMAm Slotted nut slides over cable. 19 mm 80 mm 124 mm 3. Technical Drawings Subject to alterations

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4GHz) Screw Antenna 10/2019 Page 3 4. Mounting example and procedure Vehicle roof mounting Mounting requirements and restrictions

  • Choose appropriate mounting location on flat surface (see Sketch #1) .
  • Max. tolerable mounting material thickness 10 mm.
  • Safely drill 15 mm mounting hole at desired location (see Sketch #2)
  • Clean mounting area with isopropyl alcohol or similar.
  • Unscrew mounting nut (see Sketch #3)
  • Feed all cables through mounting hole (see Sketch #4)
  • Slide slotted mounting nut over cables and screw back on to antenna mounting stud.
  • Maximum tightening torque is 5Nm. Sketch #2 - Required Mounting hole Sketch #1 - Select Mounting Location IRIDIUM/ GNSS (GPS/GLONASS)/ WLAN (2.4GHZ) SCREW ANTENNA Sketch #3 - Mounting Nut 27 mm 22 mm Used on: HIRD-S2-0101x-01 Used on: HIRD-S2-0117x-01 Both mounting nuts require the same mounting hole as described in sketch #2. Sketch #4 - Mount in hole Slotted nut slides over cable. www.te.com/hirschmann-mobility hirschmann-mobility@te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. IRIDIUM and GLONASS are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity ‘s obligations shall only be as set forth in TE Connectivity ‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or c onsequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2019 TE Connectivity Ltd. family of companies All Rights Reserved. Subject to alterations