DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM Screw Antenna 10/2019 Page 1  For use in telematic applications  Low profile (19mm height)  Mounting on several surfaces (e.g. plastic, metal, …)  Customization of cable lengths, types and connectors possible HIRSCHMANN MOBILITY IRIDIUM Screw Antenna IRD LP S/series Pt. no. 955-048-... 1. Technical data Dimensions 63mm x 63mm x 18mm Weight 150 g Temperature range -40°C to +85°C Protection class IP66 (acc. IEC 60529) IRIDIUM Frequency range 1616 - 1626.5 MHz Impedance 50 Ohm VSWR ≤ 1.8 Gain 3 dBic1 Polarization RHCP Axial ratio < 4 dB Load capacity 8 W Lightning protection DC grounded 1 dBic: referenced to an isotropic radiator, circular polarization Subject to alterations

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM Screw Antenna 10/2019 Page 2 IRIDIUM SCREW ANTENNA 63 mm 63 mm *Connector shown: TNC (male) 2. Product Family Order Code Cable (length) Connector (type) IRIDIUM IRIDIUM Remark Versions L1 C1 955-048-001 150 mm SMA male Cable RG174LL, ROHS 955-048-002 200 mm TNC male Cable RG174LL, ROHS Customization of cable lengths, types and connectors possible. 3. Technical Drawings Subject to alterations

TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// IRIDIUM Screw Antenna 10/2019 Page 3 4. Mounting example and procedure Vehicle roof mounting Mounting requirements and restrictions  Choose appropriate mounting location on flat surface (see Sketch #1) .  Max. tolerable mounting material thickness 10 mm.  Safely drill 15 mm mounting hole at desired location (see Sketch #2)  Clean mounting area with isopropyl alcohol or similar.  Unscrew mounting nut (see Sketch #3)  Feed all cables through mounting hole (see Sketch #4)  Slide slotted mounting nut over cables and screw back on to antenna mounting stud.  Maximum tightening torque is 5Nm. Sketch #1 - Select Mounting Location IRIDIUM SCREW ANTENNA Sketch #2—Required Mounting hole Slotted nut slides over cable. Sketch #4—Mount in hole Thickness 10mm max www.te.com/hirschmann-mobility hirschmann-mobility@te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. IRIDIUM is a trademark. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes onl y, is believed to be reliable. However, TE Connectivity makes no warranties as to its accu racy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligat ions shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2019 TE Connectivity Ltd. family of companies All Rights Reserved. 27.2 mm Sketch #3—Mounting Nut Subject to alterations