Download PDF9012 ENERCON
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
Jan 25, 2020 | rev. - Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +41-41-740-4554 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91-124-651 0010 Driven by rapid advancement and lower costs, Ethernet is becoming the standard for IP-based components in a wide range of military and commercial applications, including:
- Battle management systems (BMSs)
- UAVs
- Land autonomous vehicles (UGVs)
- Robots
- Mobile equipment fielded in harsh environments Modern platforms contain dozens of network devices that must be interconnected. The MILTECH9012 is an ideal solution for mobile Ethernet-equipped platforms. With the best combination of size, weight, power and cost (SWaP-C) in the industry, it saves valuable real estate for computers, sensors, targeting systems, and other devices that make mobile platforms highly effective. The MILTECH9012 is a MIL-STD, fully managed military grade network switch offering 12 triple- MILTECH™ 9012 Compact, Portable Military Managed Gigabit Ethernet Switch FEATURES DESCRIPTION speed (10/100/1000Mbps) ports. It can be remotely managed to optimize communications and prioritize critical information traffic. Advanced network features, never before found in a package of this size, include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation are standard. The MILTECH9012’s gigabit speeds and 24VDC power make it instantly compatible with any network device and power systems. The MILTECH9012 is widely used in battlefield communications C4ISR, video, sensor data acquisition and transmission. Its mechanical packaging enhancements, including sealed SCE2 circular connectors, is designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. Leveraging best-in- class switching technology, the MILTECH912 serves as a robust commercial off-the-shelf (COTS) solution for rugged LAN connectivity. SPECIFICATIONS
- Router / switch Layer 3 managed 12X10/100/1000 TX Ports.ETHERNET PORTS:
- Wire-speed hardware-based 12 ports gigabit Ethernet switch – L2, L3, L4 Capabilities
- L3-Routing capabilities:static,RIPV1,V2,OSPF V2/V3 Multicast Routing, BGP4*,VRRP ,ECMP Routing
- Multicasting (IGMP Snooping), GARP , GMRP , MLD and GVRP up to 8K groups for both IPv4 and IPv6
- Broadcasting and flooding Control up to 8K Groups
- 802.1q Tagged based VLAN up to 4K VLAN groups
- Bridge Support for VLAN Q-in-Q , manual tunneling
- Link Aggregation 802.3ad, up to 16 members in group
- Link Aggregation mechanism based on L2/ L3/ L4 parameters
- Jumbo Frame support up to 10K
- WEB, CLI, Telnet , SNMP V2/V3 management NETWORKING:
Jan 25, 2020 | rev. - Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +41-41-740-4554 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91-124-651 0010 SPECIFICATIONS
- QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/6 DSCP/T oS, and UDP/TCP ports & ranges traffic classification.
- Per port WFQ and Strict Queuing scheduling
- DSCP remarking for both IPv4 and IPv6 frames
- Ingress policer and ingress shaper per port with 500Kbps granularity
- Egress shaper per port with 500Kbps granularity
- Full-duplex flow control (IEEE802.3X) and half-duplex backpressure, symmetric and asymmetric NETWORKING: Quality of Service:
- Security via Radius Authentication 802.1x, Port / MAC access control
- Port Security
- Per port ingress and egress port mirroring
- Mirroring per VLAN and per content awareness match
- Private VLAN support per VLAN (Isolated and Promiscuous ports)
- Content Aware Policers:
- 128 Content Aware Policers
- 16 Content Aware rate policers with rates from 1fps to 32 million fps
- 8 UDP/TCP port range policers
- Advanced ACL through hardware based match patterns
- Content Aware Policers for generic MAC, ARP , IPv4, IPv6 protocols
- No restriction on any mix of entries to Content Aware Policers
- Content Aware Policers actions are permit/deny, police, count, snoop and mirror
- Special support for IP fragments, UDP/TCP port ranges
- Extensive CPU DoS prevention
- Surveillance functions by Content Aware Policers counters
- Multiple ACLs per port for optimal usage of Content Aware Policers
- Storm controllers for flooded broadcast, multicast and unicast
- Spanning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for fast recovery rings
- RPR for up to 30 units per ring with recovery time <50ms hardware based
- 20-Gbps bandwidth for ring topology
- QoS consistency across stack / ring
- Mirroring across stack / ring
- Link aggregation groups spanning multiple switches in stack / ring NETWORKING: Security: Redundancy and ring protection:
- 1 x Power Connector Type: SCE2-B-76A07-10ASN
- 12 x LAN Connector Type: SCE2-B-76A07-14SN
- 1 x Serial interface, shared with LAN port #1
- LED Indication: Per Port (Speed, Link/Activity) Per Unit (Power) CONNECTORS:
- Low profile rugged aluminum extrusion
- Conductively cooled w/custom internal heat-sinks
- Ingress protection against sand, dust and moisture
- Anodize Coating, MIL-A-8625, Type II, Class 2 CHASSIS:
- MIL-STD-1275B | MIL-STD-704A | MIL-STD-461E | MIL-STD-810F GM | IP68STANDARDS: MILTECH™ 9012 Compact, Portable Military Managed Gigabit Ethernet Switch
Jan 25, 2020 | rev. - Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +41-41-740-4554 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91-124-651 0010 SPECIFICATIONS
- 96.8 Mpps wire speed forwarding rate
- 56 Gbps maximum forwarding bandwidth
- 8K MAC Address PERFORMANCE:
- Exceed MIL-STD-1275B and MIL-STD-704A Surge and Spike protection
- Voltage Input: 24Vdc Nominal (18-70V)
- Power Consumption: 13W Typical
- Chassis grounding POWER:
- MIL-STD-461E Electromagnetic compatibility
- CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 ELECTROMAGNETIC:
- Dimensions: 166.4mm (L) x 144mm (W) x 56mm(H) including connectors
- Dimensions: 6.55” (L) x 5.67” (W) x 2.20” (H) including connectors
- Weight: 1.1Kg PHYSICAL:
- Four 4.5mm mounting holes on bottom for mounting to any flat surface.INSTALLATION:
- No Moving Parts. Passive Cooling.COOLING:
- -45ºC to +85ºC (-49ºF to +185ºF) Cold Start-UpOPERATING TEMP:
- -45ºC to +85ºC (-49ºF to +185ºF)STORAGE TEMP: * Currently not supported – software upgrade option.
ORDERING INFORMATION
- Managed Military Grade Gigabit Switch, 12 x 10/100/1000TX 1-9012-000
- Managed Military Grade Gigabit Switch, 12 x 10/100/1000TX, With black zinc nickel plating Connectors1-9012-002
- Starter Cable set for MILTECH9012, SCE2 to RJ-45 Connectors, 5 feet length2-CBL9012PWR
- LAN Harness for MILTECH9028/90122-CBL9028LAN
- LAN and management Harness for MILTECH9028/90122-CBL9028LN+ MILTECH™ 9012 Compact, Portable Military Managed Gigabit Ethernet Switch A A B B C C D D E E F F DRAWN DATE OF / PATH: MATERIAL: CHECKED APPROVED DESIGNED DWG TITLE DWG No. SCALE SIZE SHEET THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. UNSPECIFIED TOLERANCES: - LINEAR DIMENSIONS PER ISO 2768-1(DIN 7168), GRADE -HOLES & OPENINGS DIMENSIONS: H -SHAFTS & EXTERNAL DIMENSIONS: h -ANGULAR DIMENSIONS: • 0.5• UNSPECIFIED GEOMETRICAL TOLERANCES PER ISO 2768-2(DIN 7168), GRADE: FINISH: SURFACE ROUGHNESS: NAME NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO STEP FILE: Tel: +972-4-6377741 P.O.B. 1500 Pardes Hanna, 37100, Israel REMOVE BURRS & SHARP EDGES 0.3X45• PROJECT NAME: Fax:+972-4-6377761 ALL DIMENSIONS ARE IN MM. DON'T SCALE DRAWING. CHANGES MUST BE MADE ON MODEL FILE. WEIGHT: REV. MT9012 ICD 90120000ICD 1 1 D:\\Works\\TECHAYA MT 9012\\MT 9012 ICD.idw 04/07/2012 L.V. MT9012 Techaya Ltd
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPROVED 1 1 RELEASE 7/30/2012 max 2 COG ADDED 21.01.2013 GD 166.4 144.096.0 26.0 60.0 103.2 24.7 39.0 117.0 24.5 20.0 20.0 24.5 #8-32NC CROUNDING SCREW INDICATORS PANEL SEALING TEST HOLE. SEALED WITH M5 SEAL SCREW. NAME PLATE #8-32NC GROUNDING SCREW. SCE2-x-76A07-10ASX-002 AMPHENOL CONNECTOR SCE2-76A07-14S 5.2 156.0
- 4.3 (X4) 41.2 55.9 33.3 85.0 25.8 NOTES: 1. MATERIALS: BODY AL. ALLOY 6061-T651 PER AMS QQ-250/11 OR AMS QQ-A-250/B. ALL FASTENERS -STAINLESS STEEL AISI 300 SERIES. 2. FINISH: CHEMICAL CONVERSION FILM PER MIL-DTL-5541F, TYPE I, CL.1A. (goldy) PAINTING: - ONE LAYER OF PRIMERY COAT STRONCIUM CHROMATE PER MIL-P-23377, THICKNESS 15-20 mkm. - TOP COAT POLYURETHANE CARC PER HENTZEN SPEC 15801GPA-2/03059CMU. COLOR NATO GREEN, TWO COATS 40-50 MICRONS THICK. 3. WEIGHT: 1.5 Kg. 81.0 70.0 81.0 20.0 COG COG AA BB CC DD EE FF DRAWN DATE OF/ PATH: MATERIAL: CHECKED APPROVED DESIGNED DWG TITLE DWG No. SCALE SIZE SHEET THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. UNSPECIFIED TOLERANCES: - LINEAR DIMENSIONS PER ISO 2768-1(DIN 7168), GRADE -HOLES & OPENINGS DIMENSIONS: H -SHAFTS & EXTERNAL DIMENSIONS: h -ANGULAR DIMENSIONS: •0.5• UNSPECIFIED GEOMETRICAL TOLERANCES PER ISO 2768-2(DIN 7168), GRADE: FINISH: SURFACE ROUGHNESS: NAME NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO STEP FILE: Tel: +972-4-6377741 P.O.B. 1500 Pardes Hanna, 37100, Israel REMOVE BURRS & SHARP EDGES 0.3X45• PROJECT NAME: Fax:+972-4-6377761 ALL DIMENSIONS ARE IN MM. DON'T SCALE DRAWING. CHANGES MUST BE MADE ON MODEL FILE. WEIGHT:REV. MT9012 ICD 90120000ICD 1 1 D:\\Works\\TECHAYA MT 9012\\MT 9012 ICD.idw 04/07/2012 L.V. MT9012 Techaya Ltd
ZONEREVDESCRIPTIONDATEAPPROVED 11RELEASE7/30/2012max 2COG ADDED21.01.2013GD 166.4 144.0 96.026.0 60.0 103.2 24.739.0 117.0 24.5 20.0 20.0 24.5 #8-32NC CROUNDING SCREW INDICATORS PANEL SEALING TEST HOLE. SEALED WITH M5 SEAL SCREW. NAME PLATE #8-32NC GROUNDING SCREW. SCE2-x-76A07-10ASX-002 AMPHENOL CONNECTOR SCE2-76A07-14S 5.2 156.0
- 4.3 (X4) 41.2 55.9 33.3 85.0 25.8 NOTES: 1. MATERIALS: BODY AL. ALLOY 6061-T651 PER AMS QQ-250/11 OR AMS QQ-A-250/B. ALL FASTENERS -STAINLESS STEEL AISI 300 SERIES. 2. FINISH: CHEMICAL CONVERSION FILM PER MIL-DTL-5541F, TYPE I, CL.1A. (goldy) PAINTING: - ONE LAYER OF PRIMERY COAT STRONCIUM CHROMATE PER MIL-P-23377, THICKNESS 15-20 mkm. - TOP COAT POLYURETHANE CARC PER HENTZEN SPEC 15801GPA-2/03059CMU. COLOR NATO GREEN, TWO COATS 40-50 MICRONS THICK. 3. WEIGHT: 1.5 Kg. 81.0 70.0 81.0 20.0 COG COG A B