90-01 COILCRAFT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

Features

 No molding stress to break wire  10% inductance tolerance standard, 5% available  Temperature coefficient compatible with N030-N080 capacitors through part number 90-30  Standard EIA color coding  Significant savings for high volume users  Available bulk packed in conventional tape and reel or “ammo packs.” Custom lead forming also available  Offered in 49 standard values or in custom values Typical Q vs Frequency Black = 0 Brown = 1 Red = 2 Orange = 3 Yellow = 4 Green = 5 Blue = 6 Violet = 7 Gray = 8 White = 9 Gold = Decimal point Tolerance: Silver = 10% Gold = 5% Notes: A gold stripe in the 1st or 2nd location represents a decimal point. When a decimal point is used, there is no multiplier. The inductance value indicated is in microHenries. Color Coding – Inductance in μH Weight: 171 – 201 mg This series was discontinued on December 31, 2006. An RoHS-compliant version will not be made.

© Coilcraft, Inc. 2009 Axial Lead Chokes – 90 Series Specifications subject to change without notice. Please check our website for latest information. Specifications subject to change without notice. Please check our website for latest information. Document 115-2 Document 115-2 Revised 12/31/06 Part Inductance 2 Q3 Test freq DCR max SRF min Irms4 Core number1 ±10% (µH) min (MHz) (Ohms) (MHz) (mA) material 90-01 0.10 38 25 0.08 680 1380 Phenolic 90-02 0.12 38 25 0.09 640 1300 Phenolic 90-03 0.15 38 25 0.11 600 1230 Phenolic 90-04 0.18 35 25 0.12 550 1120 Phenolic 90-05 0.22 33 25 0.14 510 1040 Phenolic 90-06 0.27 33 25 0.16 460 975 Phenolic 90-07 0.33 30 25 0.22 410 830 Phenolic 90-08 0.39 30 25 0.30 365 710 Phenolic 90-09 0.47 30 25 0.35 330 660 Phenolic 90-10 0.56 30 25 0.50 310 550 Phenolic 90-11 0.68 28 25 0.60 280 500 Phenolic 90-12 0.82 28 25 0.85 260 420 Phenolic 90-13 1.0 25 25 1.00 240 390 Phenolic 90-14 1.2 60 7.9 0.15 150 620 Ferrite 90-15 1.5 60 7.9 0.16 140 560 Ferrite 90-16 1.8 60 7.9 0.20 125 480 Ferrite 90-17 2.2 60 7.9 0.29 115 415 Ferrite 90-18 2.7 50 7.9 0.40 100 355 Ferrite 90-19 3.3 50 7.9 0.42 90 285 Ferrite 90-20 3.9 50 7.9 0.60 80 263 Ferrite 90-21 4.7 40 7.9 0.66 60 239 Ferrite 90-22 5.6 40 7.9 0.70 45 195 Ferrite 90-23 6.8 40 7.9 0.90 40 185 Ferrite 90-24 8.2 40 7.9 1.00 28 160 Ferrite 90-25 10 35 7.9 1.10 24 144 Ferrite 90-26 12 60 2.5 1.62 20 160 Ferrite 90-27 15 60 2.5 1.75 17 157 Ferrite 90-28 18 60 2.5 1.85 16 149 Ferrite 90-29 22 50 2.5 2.0 14 144 Ferrite 90-30 27 50 2.5 2.1 12 140 Ferrite 90-31 33 50 2.5 2.2 10 130 Ferrite 90-32 39 50 2.5 2.3 9.5 125 Ferrite 90-33 47 50 2.5 2.4 9.0 110 Ferrite 90-34 56 50 2.5 3.0 7.8 100 Ferrite 90-35 68 50 2.5 3.4 7.0 92 Ferrite 90-36 82 50 2.5 3.8 6.7 88 Ferrite 90-37 100 50 2.5 4.1 6.1 84 Ferrite 90-38 120 60 0.79 6.5 4.8 66 Ferrite 90-39 150 60 0.79 8.3 4.1 61 Ferrite 90-40 180 60 0.79 8.9 4.0 57 Ferrite 90-41 220 60 0.79 10.1 3.6 52 Ferrite 90-42 270 60 0.79 11.0 3.3 47 Ferrite 90-43 330 60 0.79 12.4 3.1 45 Ferrite 90-44 390 60 0.79 13.6 2.9 40 Ferrite 90-45 470 60 0.79 18.4 2.4 36 Ferrite 90-46 560 60 0.79 20.3 2.2 35 Ferrite 90-47 680 60 0.79 22.3 2.0 30 Ferrite 90-48 820 60 0.79 25.0 1.9 29 Ferrite 90-49 1000 60 0.79 27.4 1.8 28 Ferrite 1. 5% tolerance part available as special order. Add –5 to end of the part number: e.g. 90-49-5. 2. Inductance measured with a Coilcraft AXL-A test fixture and Agilent/HP 4192/4286 Impedance Analyzers. 3. Q measured on Agilent/HP 4192/4286 with AXL-A, direct-connected to Agilent/HP 4342 Q-Meter. 4. Temperature rise at rated current and 90°C ambient 1.2 – 1000 µH: 15°C 5. Operating temperature range 1.2 – 1000 µH: −40°C to +105°C 6. Electrical specifications at 25°C. 7. Color coding per MIL-C-15305C 8. Epoxy coating: flame resistant 94 VO 9. Designed to meet requirements of Military Specifications MS75083, MS75084 and MS75085.