9-1419125-5

1461102-2 TEC

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 3

Technical content

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays n 10A contact rating n UL TV-5 and TV-8 rating n 1 form A (NO) contact arrangement n Sensitive and standard coils available Typical applications Appliances, HVAC, cable TV, monitor display Approvals UL E58304, TUV R50138781, VDE 40019832, CQC03001002917 Technical data of approved types on request Contact Data Contact arrangement 1 Form A (NO) Rated voltage 250VAC, 30VDC Max. switching voltage 250VAC, 30VDC Rated current 5 to 10A Contact material AgSnO2 Min. recommended contact load 100mA at 5VDC Frequency of operation 360 ops./h Operate/release time max. 15/5ms Electrical endurance SDT-LMR(2): 5A, 250VAC res, 70°C 100x103 ops. TV-5, 120VAC 25x103 ops. SDT-DMR(2): 10A, 250VAC res, , 70°C 100x103 ops. TV-8, 120VAC 25x103 ops. Contact ratings 5 to 10A Mechanical endurance, DC coil 10x106 operations Coil Data Coil voltage range 3 to 48VDC Operative range, IEC 61810 1 Coil insulation system according UL Class E Contact Data (continued) Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW SDT-LMR & SDT-DMR2 003 3 2.25 0.3 36 250 005 5 3.75 0.5 100 250 006 6 4.50 0.6 144 250 009 9 6.75 0.9 324 250 012 12 9.00 1.2 576 250 018 18 13.50 1.8 1296 250 024 24 18.00 2.4 2304 250 SDT-DMR 003 3 2.25 0.3 16.7 540 005 5 3.75 0.5 46.3 540 006 6 4.50 0.6 66.7 540 009 9 6.75 0.9 150 540 012 12 9.00 1.2 267 540 018 18 13.50 1.8 600 540 024 24 18.00 2.4 1067 540 048 48 36.00 4.8 4267 540 SDT-LMR2 003 3 2.25 0.3 60 150 005 5 3.75 0.5 167 150 006 6 4.50 0.6 240 150 009 9 6.75 0.9 540 150 012 12 9.00 1.2 960 150 018 18 13.50 1.8 2160 150 024 24 18.00 2.4 3840 150 All figures are given for coil without pre-energization, at ambient temperature +23°C Miniature PCB Relay SDT-R 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5)

Ordering Information

Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. Coil operative rangeOperate time 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5) Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5) Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. Electrical endurance ZtV

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays Miniature PCB Relay SDT-R (Continued) Insulation Data Initial dielectric strength between open contacts 1000Vrms between contact and coil 4000Vrms Clearance/creepage between contact and coil >1.6/3.2mm Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -30°C to +70°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Shock resistance (functional) 10g Shock resistance (destructive) 100g Weight 11g Resistance to soldering heat THT IEC 60068-2-20 RTII: 270°C/10s RTIII: 260°C/5s Packaging/unit tube/25 pcs., carton box/1000 pcs. tray/100 pcs., carton box/1000 pcs. 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5) Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. Terminal assignment Bottom view on solder pins 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5) Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. Dimensions PCB layout Bottom view on solder pins 477 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 Reference Data Wiring Diagram (Bottom View)Outline Dimensions Operating Voltage (SDT-LMR) Operate Time Life Expectancy PC Board Layout (Bottom View) Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) % of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Voltage Range Pick-Up Voltage Cool Coil Hot Coil 5A Applied Maximum Allowable Coil Voltage 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 250VAC Resistive (250mW Coil) 250VAC Resistive (540mW Coil) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). .394 ± .012 (10.0 ± .3) .02 (.5) .945 ± .012 (24.0 ± .3) .018 (.45) .984 ± .012 (25.0 ± .3) .008 (.2) .098 (2.5) .018 (.4) .039 (1.0) .646 ± .012 (16.4 ± .3) .295 (7.5) .138 ± .008 (3.5 ± .2) .039 (1.0) .646 ± .004 (16.4 ± .1) .295 ± .004 (1.3) .38 ± .004 (3.5 ± .1) 2 – .059 DIA (1.5) Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. None at present. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays Miniature PCB Relay SDT-R (Continued) Product code structure Typical product code SDT -S -1 12 D M R 2 ,000 Basic type SDT Miniature PCB Relay SDT-R Enclosure S Snap on cover Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil input D Standard (540mW) L Sensitive (250mW) Contact arrangement M 1 form A (NO) contact Design R New design Coil type Blank Standard 2 as LMR2: 150mW coil consumption as DMR2: 250mW coil consumption Suffix ,000 Standard Other types on request Product code Coil Coil sensitivity Design Cont.material Arrangement Coil type Part number SDT-S-105LMR,000 5VDC Sensitive new design AgSnO2 1 form A (NO) 250mW 8-1419125-1 SDT-S-112LMR,000 12VDC standard coil 9-1419125-9 SDT-S-124LMR,000 24VDC 1419126-2 SDT-S-103DMR,000 3VDC Standard 540mW coil 1461267-1 SDT-S-105DMR,000 5VDC standard coil 8-1419125-0 SDT-S-112DMR,000 12VDC 9-1419125-7 SDT-S-118DMR,000 18VDC 1461267-3 SDT-S-124DMR,000 24VDC 1419126-1 SDT-S-148DMR,000 48VDC 1461023-2 SDT-S-105LMR2,000 5VDC Sensitive 150mW coil 8-1419125-3 SDT-S-109LMR2,000 9VDC 9-1419125-5 SDT-S-105DMR2,000 5VDC Standard 250mW coil 9-1440002-6 SDT-S-109DMR2,000 9VDC 9-1440002-8