8KP36CA

8KP UNSEMI

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 6

Technical content

Features

Note: (1) Non-repetitive current pulse per Fig.5 and derated above TA= 25°C per Fig.1 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

Description

Uni-directional Bi-directional

Applications

Revision March 1,2022 Surface Mount Transient Voltage Suppressors www.unsemi.com.tw 8000W www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5 Mechanical Data  Case: Molded plastic  Epoxy: UL 94V-0 rate flame retardant  Lead: Solderable per MIL-STD-202, method 208 guranteed  Polarity: Color band denotes cathode end except Bipola  Mounting position: Any Functional Diagram 8000 See Next Table 8.0 500 -55 to +150 -40 to +125 PPPM IPP PD IFSM TJ ,TSTG TOP Peak power dissipation with a 10/1000 μs waveform (1) Peak pulse current with a 10/1000 μs waveform (1) Power dissipation on infinite heatsink at TL = 75℃ Peak forward surge current, 8.3 ms single half sine-wave unidirectional only (2) Junction and storage temperature range Operating temperature range W A W A Parameter Symbol Value Unit Maximum Ratings and Thermal Characteristics (TA =25℃ unless otherwise noted)

Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 8KP Series 8000W I-V Curve Characteristics Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current Ratings and Characteristic Curves (TA=25℃ unless otherwise noted) 150 200 250 300 350 400 1 10 100 Number of Cycles at 60 HZ IFSM,Peak Forward Surge Currnet (A) 8.3ms Single Half Sine-Wave 1000 PPM(AV),Steady State Power Dissipation (W) 0 25 50 75 100 125 150 175 200 TL - Lead Temperature (°C) 0.375" (9.5mm) Lead Lengths 0.8x0.8x0.040"(20x20m m) Copper Heat Sinks0 60Hz Resistive or Inductive Load V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Physical Specifications Environmental Specifications Weight Case Polarlty Terminal Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock 0.07 ounce, 2.1 gram JEDEC R-6/P600 Molded Plasticover glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D

Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 8KP Series 8000W Dimensions A B C D Min Max MaxMin Inches Millimeters 1.000 0.340 0.048 0.340 0.360 0.052 0.360 25.40 8.64 1.22 8.64 9.14 1.32 9.14 Part Numbering K P C Axxx8 R6/P600 Dimensions 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VRWM VOLTAGE SERIES Soldering Parameters Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/second max 3°C/second max 217°C 60 -150 Seconds 260 +0/-5°C 20 -40 Seconds 6°C/second max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min) -Temperature Max (Ts(max) - Time (min to max) (ts) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts

Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 8KP Series 8000W

Ordering Information

Packaging Dimensions Unit: Inches (Millimeters) 0.40±0.020 (10.16±0.508) 2.56 (65.00) 0.25 (6.35) Part Number Component Package Quantity Packaging Option 8KPXXXXX R6/P600 250 BOX

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.