86A

86A TEC

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

SENSOR SOLUTIONS ///86A 9/2015 Page 1 (Image displays Absolute type) 86A SPECIFICATIONS  316L SS Pressure Sensor  Small Profile  0.5 - 4.5V High Level Output  Gage, Absolute  ASIC Calibrated The 86A is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86A is designed for o-ring mounting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The 86A is designed for high performance, low pressure applications. A custom ASIC is used for temperature compensation, offset correction, and provides an amplified output of 0.5 to 4.5V. For a similar sensor with a plastic threaded fitting, refer to the LM pressure transducer.

SENSOR SOLUTIONS ///86A 9/2015 Page 2

FEATURES

 O-Ring Mount  -20ºC to +85ºC Operating Temperature Range  ±1.0% Pressure Non Linearity  Down to ±3.0% Total Error Band  Solid State Reliability

APPLICATIONS

 Level Controls  Tank Level Measurement  OEM Equipment  Corrosive Fluids and Gas Measurement Systems  Sealed Systems  Manifold Pressure Measurement  Barometric Pressure Measurement  Submersible Depth Monitoring STANDARD RANGES Range psig psia Range Barg Bara 0 to 1  0 to .07  0 to 2  0 to .14  0 to 5  0 to .35  0 to 15   0 to 1   0 to 30   0 to 2   0 to 50   0 to 5   0 to 100   0 to 7   0 to 150   0 to 10   Intermediate ranges available, contact factory.

SENSOR SOLUTIONS ///86A 9/2015 Page 3 PERFORMANCE SPECIFICATIONS Supply Voltage: 5.0Vdc Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Full Scale Output Span 4.5 V Zero Pressure Output (Offset) 0.5 V Pressure Non Linearity -1 ±0.3 1 %Span 1 Pressure Hysteresis -0.1 0.1 %Span Repeatability ±0.02 %Span Temperature Error – Span (0°C to 40°C) 1, 2psi and .07bar: ±2.0 ≥5psi or ≥.35bar: ±1.5 %Span 2 Temperature Error – Zero (0°C to 40°C) 1, 2psi and .07bar: ±2.0 ≥5psi or ≥.35bar: ±1.5 %Span 2 Accuracy (combined linearity, hysteresis, & repeatability) 0.25 %Span 1 Total Error Band (includes calibration errors above & temperature effects over the compensated range) 1, 2psi and .07bar: ±7 5psi and .35bar: ±5 >5psi or .35bar: ±3 %Span Supply Voltage 4.75 5.00 5.25 V 3 Insulation Resistance (50Vdc) 50 MΩ 4 Pressure Overload 3X Rated Compensated Temperature 0 +40 ºC Operating Temperature -20 +85 ºC Media – Pressure Port Liquids and Gases compatible with 316L Stainless Steel Notes 1. Best fit straight line. 2. Over the compensated temperature range with respect to 2 5°C. 3. Guarantees output/input ratiometricity. 4. Between case and sensing element. 5. The maximum pressure that can be applied to a transduce r without rupture of either the sensing element or transducer.

SENSOR SOLUTIONS ///86A 9/2015 Page 4 DIMENSIONS

SENSOR SOLUTIONS ///86A 9/2015 Page 5

ORDERING INFORMATION

86A 3 R - 00000 0 - 150P G Pressure Range Custom P/N (00000 = Standard Product) Output (3 = 0.5 to 4.5V, X = Special Output) Connection (R = 6" Ribbon Cable, C = 6" Ribbon Cable with Connector, Model Port Type (0 = Standard, X = Special) Pressure Unit (G = Gage, A = Absolute) Units (P = psi, B = Bar) X = Special Connection) TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is beli eved to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Conn ectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity Company

45738 Northport Loop West

Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com EUROPE Measurement Specialties (Europe), Ltd., a TE Connectivity Company

26 Rue des Dames

78340 Les Clayes-sous-Bois, France

Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com