8600 ITT

Document overview

  • PDF pages: 3

Technical content

Page 1

PDF page 1 diagram

Typical Applications

Features/Benefits

A

  • Available with overtravel
  • Detection
  • Telecommunications and
  • Normally closed models available

networking equipment

  • Microminiature size ideal for

applications where space is limited • Computers and peripherals

  • RoHS compliant

Models Available

Specifications

CONTACT RATING: Q contact material (8631, 8632 Models): 500 mA @ 120 V AC or 28 V DC; 250 mA @ 250 V AC; (8633 Model): 250 mA @ 120 V AC or 28 V DC; 125 mA @ 250 V AC. See page A-71 for additional ratings. ELECTRICAL LIFE: 8631 and 8633 MODELS: 250,000 actuations at full load. 8632 MODEL: 100,000 actuations at full load. CONTACT RESISTANCE: Below 30 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 65ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9.

Build-A-Switch

Materials

CASE: Glass filled phenolic or diallyl phthalate (DAP), (UL94V-0). PLUNGER: Glass filled nylon (UL94V-0), black standard. BUSHING: Brass, nickel plated. CONTACTS: Q contact material: Coin silver, silver plated. See page A-71 for additional contact materials. TERMINALS: 8631, 8632 MODELS: Copper alloy, silver plated. 8633 MODEL: Q contact material: Coin silver. See page A-71 for additional contact materials. TERMINAL SEAL: 8633 MODEL: Epoxy. 8631, 8632 MODELS: Terminals insert molded. HARDWARE: Nut: Brass, nickel plated.

NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-70 and A-71. For additional options not shown in catalog, consult Customer Service Center.

Switch Function 8631 SPST Off-Mom. 8632 SPST Off-Mom.

Termination

8633 SPST On-Mom.

Z Solder lug C PC Thru-hole

Contact Material B Gold Q Silver G Gold over silver

Seal D No epoxy E Epoxy

Plunger Color 2 Black 3 Red

A–69

Page 2

SWITCH FUNCTION

A

NO. POLES MODEL NO. SWITCH FUNCTION POS. 1 POS. 2 TOTAL TRAVEL ACTUATION FORCE SCHEMATIC
SP 8 631 OFF MOM. .040 ( 1,02) TYP. 5 oz (140g) TYP. N.O.
SPST PANEL MOUNTING Part number shown: 8631ZQD2 Terminals Insert Molded
SP 8 632 OFF MOM. .106 ( with overtravel 2,69) TYP. .024 (0,61) TYP. 6.25 oz (177g) TYP. N.O. with overtravel
SPST PANEL MOUNTING Part number shown: 8632ZQD2 Terminals Insert Molded
SP 8 633 ON MOM. .048 ( 1,22) TYP. 5 oz (140g) TYP. N.C.
SPST PANEL MOUNTING Part number shown: 8633ZQE2

MOM. = Momentary

NOTE: Caps available for plunger options, see page A-75.

TERMINATIONS

Z

C

SOLDER LUG

PC THRU-HOLE

8631, 8632 models only.

8633 models only.

8631, 8632 models only.

PC MOUNTING

PDF page 2 diagram
PDF page 2 diagram

Third Angle Projection

A–70

Page 3

CONTACT MATERIAL

A

OPTION CODE RoHS COMPLIANT * RoHS COMPATIBLE * CONTACT MATERIAL TERMINAL PLATING RATINGS
B YES YES GOLD 1 GOLD 1 LOW LEVEL/ DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX.
Q YES YES SILVER 4 SILVER 5 POWER 8631, 8632 MODELS: 500 mA @ 120 V AC OR 28 V DC; 250 mA @ 250 V AC. 8633 MODELS: 250 mA @ 120 V AC OR 28 V DC; 125 mA @ 250 V AC.
G YES YES GOLD OVER SILVER 4 GOLD 3 LOW LEVEL/DRY CIRCUIT OR POWE 0.4 VA MAX @ 20 V AC OR DC MAX. OR 8631, 8632 MODELS: R 500 mA @ 120 V AC OR 28 V DC; 250 mA @ 250 V AC. 8633 MODELS: 250 mA @ 120 V AC OR 28 V DC; 125 mA @ 250 V AC.

\* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 CONTACTS: Coin silver, with gold plate over nickel plate. 3 TERMINALS: Copper alloy, with gold plate over nickel plate. 8633 model only: Coin silver, with gold plate over nickel plate. 4 CONTACTS: Coin silver, silver plated. 5 TERMINALS: Copper alloy, silver plated. 8633 model only: coin silver.

SEAL

D NO EPOXY SEAL

Not available on 8633 model. Standard on 8631, 8632 models.

NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

8631, 8632 models

with all options when ordered with G or Q contact material.

Q contact material standard with C, Z terminations.

E EPOXY SEAL

Not available on 8631, 8632 models. Standard on 8633 model only.

PLUNGER COLOR

PDF page 3 diagram

AVAILABLE HARDWARE

Cap

.245 DIA. (6,22 )

.187 (4,75)

PART NO.

785101000 WHITE

.081

785102000 BLACK

(2,03)

785103000 RED

Material: Nylon

NOTE: Other cap colors available, consult Customer Service Center.

Finish: Gloss

Third Angle Projection

A–71