8600 ITT
Document overview
- PDF pages: 3
Technical content
Page 1

Typical Applications
Features/Benefits
A
- Available with overtravel
- Detection
- Telecommunications and
- Normally closed models available
networking equipment
- Microminiature size ideal for
applications where space is limited • Computers and peripherals
- RoHS compliant
Models Available
Specifications
CONTACT RATING: Q contact material (8631, 8632 Models): 500 mA @ 120 V AC or 28 V DC; 250 mA @ 250 V AC; (8633 Model): 250 mA @ 120 V AC or 28 V DC; 125 mA @ 250 V AC. See page A-71 for additional ratings. ELECTRICAL LIFE: 8631 and 8633 MODELS: 250,000 actuations at full load. 8632 MODEL: 100,000 actuations at full load. CONTACT RESISTANCE: Below 30 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 65ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9.
Build-A-Switch
Materials
CASE: Glass filled phenolic or diallyl phthalate (DAP), (UL94V-0). PLUNGER: Glass filled nylon (UL94V-0), black standard. BUSHING: Brass, nickel plated. CONTACTS: Q contact material: Coin silver, silver plated. See page A-71 for additional contact materials. TERMINALS: 8631, 8632 MODELS: Copper alloy, silver plated. 8633 MODEL: Q contact material: Coin silver. See page A-71 for additional contact materials. TERMINAL SEAL: 8633 MODEL: Epoxy. 8631, 8632 MODELS: Terminals insert molded. HARDWARE: Nut: Brass, nickel plated.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-70 and A-71. For additional options not shown in catalog, consult Customer Service Center.
Switch Function 8631 SPST Off-Mom. 8632 SPST Off-Mom.
Termination
8633 SPST On-Mom.
Z Solder lug C PC Thru-hole
Contact Material B Gold Q Silver G Gold over silver
Seal D No epoxy E Epoxy
Plunger Color 2 Black 3 Red
A–69
Page 2
SWITCH FUNCTION
A
| NO. POLES | MODEL NO. | SWITCH FUNCTION POS. 1 POS. 2 | TOTAL TRAVEL | ACTUATION FORCE SCHEMATIC |
| SP 8 | 631 | OFF MOM. .040 ( | 1,02) TYP. | 5 oz (140g) TYP. N.O. |
| SPST PANEL MOUNTING Part number shown: 8631ZQD2 Terminals Insert Molded | ||||
| SP 8 | 632 | OFF MOM. .106 ( | with overtravel 2,69) TYP. .024 (0,61) TYP. | 6.25 oz (177g) TYP. N.O. with overtravel |
| SPST PANEL MOUNTING Part number shown: 8632ZQD2 Terminals Insert Molded | ||||
| SP 8 | 633 | ON MOM. .048 ( | 1,22) TYP. | 5 oz (140g) TYP. N.C. |
| SPST PANEL MOUNTING Part number shown: 8633ZQE2 | ||||
MOM. = Momentary
NOTE: Caps available for plunger options, see page A-75.
TERMINATIONS
Z
C
SOLDER LUG
PC THRU-HOLE
8631, 8632 models only.
8633 models only.
8631, 8632 models only.
PC MOUNTING


Third Angle Projection
A–70
Page 3
CONTACT MATERIAL
A
| OPTION CODE | RoHS COMPLIANT * | RoHS COMPATIBLE * | CONTACT MATERIAL | TERMINAL PLATING | RATINGS | |
|---|---|---|---|---|---|---|
| B | YES | YES | GOLD 1 | GOLD 1 | LOW LEVEL/ DRY CIRCUIT | 0.4 VA MAX. @ 20 V AC OR DC MAX. |
| Q | YES | YES | SILVER 4 | SILVER 5 | POWER | 8631, 8632 MODELS: 500 mA @ 120 V AC OR 28 V DC; 250 mA @ 250 V AC. 8633 MODELS: 250 mA @ 120 V AC OR 28 V DC; 125 mA @ 250 V AC. |
| G | YES | YES | GOLD OVER SILVER 4 | GOLD 3 | LOW LEVEL/DRY CIRCUIT OR POWE | 0.4 VA MAX @ 20 V AC OR DC MAX. OR 8631, 8632 MODELS: R 500 mA @ 120 V AC OR 28 V DC; 250 mA @ 250 V AC. 8633 MODELS: 250 mA @ 120 V AC OR 28 V DC; 125 mA @ 250 V AC. |
\* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 CONTACTS: Coin silver, with gold plate over nickel plate. 3 TERMINALS: Copper alloy, with gold plate over nickel plate. 8633 model only: Coin silver, with gold plate over nickel plate. 4 CONTACTS: Coin silver, silver plated. 5 TERMINALS: Copper alloy, silver plated. 8633 model only: coin silver.
SEAL
D NO EPOXY SEAL
Not available on 8633 model. Standard on 8631, 8632 models.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
8631, 8632 models
with all options when ordered with G or Q contact material.
Q contact material standard with C, Z terminations.
E EPOXY SEAL
Not available on 8631, 8632 models. Standard on 8633 model only.
PLUNGER COLOR

AVAILABLE HARDWARE
Cap
.245 DIA. (6,22 )
.187 (4,75)
PART NO.
785101000 WHITE
.081
785102000 BLACK
(2,03)
785103000 RED
Material: Nylon
NOTE: Other cap colors available, consult Customer Service Center.
Finish: Gloss
Third Angle Projection
A–71