86-015G-C TEC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

SENSOR SOLUTIONS ///86 9/2015 Page 1 Compensated SPECIFICATIONS  316L SS Pressure Sensor  Small Profile  0 - 100mV Output  Absolute and Gage  Temperature Compensated The 86 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86 compensated is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%. Please refer to the 86 uncompensated and constant voltage datasheets for more information on different features of the 86.

SENSOR SOLUTIONS ///86 9/2015 Page 2

FEATURES

 O-Ring Mount  -40ºC to +125ºC Operating Temperature Range  ±0.2% Pressure Non Linearity  1.0% Interchangeable Span (provided by gain set resistor)  Solid State Reliability

APPLICATIONS

 Medical Instruments  Process Control  Fresh & Waste Water Measurements  Partial Vacuum Gas Measurement  Pressure Transmitters  Tank Level Systems (RV & Industrial) STANDARD RANGES Range psig psia 0 to 5   0 to 15   0 to 30   0 to 50   0 to 100   0 to 300   0 to 500  

SENSOR SOLUTIONS ///86 9/2015 Page 3 PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS 005PSI ≥015PSI UNITS NOTES MIN TYP MAX MIN TYP MAX Span 50 100 150 75 100 150 mV 1 Zero Pressure Output -2.0 0 2.0 -1.0 0 1.0 mV 2 Pressure Non Linearity -0.2 0.2 -0.1 0.1 %Span 3 Repeatability ±0.02 ±0.02 %Span Output Resistance 4.0K 7.0K 4.0K 6.0K Ω Temperature Error – Span -1.0 1.0 -0.75 0.75 %Span 4 Temperature Error – Offset -1.5 1.5 -0.50 0.50 %Span 4, 5 Long Term Stability – Span ±0.10 ±0.10 %Span/Year Long Term Stability – Offset ±0.25 ±0.10 %Span/Year Output Load Resistance 5M 5M Ω 7 Insulation Resistance (50Vdc) 50M 50M Ω 8 Output Noise (10Hz to 1KHz) 1.0 1.0 uV p-p Response Time (10% to 90%) 0.1 0.1 ms Pressure Overload 3X 3X Rated Pressure Burst 4X 4X Rated 9 Compensated Temperature 0 50 -20 +85 °C Operating Temperature -20 +70 -40 +125 ºC 10 Storage Temperature -50 +125 -50 +125 ºC 10 Media – Pressure Port Liquids and Gases compatible with 316/316L Stainless Steel Media – Reference Port Compatible with Silicon, Pyrex, Gold, Fluorosilicone Rubber, and 316/316L Stainless Steel Notes 1. For amplified output circuits, 3.012V ±1% interchangeability with gain set resistor. See application schematic. 2. Measured at vacuum for absolute (A) and at ambient for gage (G). 3. Best fit straight line. 4. Over the compensated temperature range with respect to 2 5°C. 5. 15-psi range sensors have a temperature error of °0.75% (max) of zero from -20°C to +85°C. 6. Guarantees output/input ratiometricity. 7. Load resistance to reduce measurement errors due to o utput loading. 8. Between case and sensing element. 9. The maximum pressure that can be applied to a transduce r without rupture of either the sensing element or transducer. 10. Maximum temperature range for product with standard c able and connector is -20°C to +105°C.

SENSOR SOLUTIONS ///86 9/2015 Page 4 DIMENSIONS CONNECTIONS

SENSOR SOLUTIONS ///86 9/2015 Page 5 APPLICATION SCHEMATIC

ORDERING INFORMATION

TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is belie ved to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s ob ligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity Company

45738 Northport Loop West

Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com EUROPE Measurement Specialties (Europe), Ltd., a TE Connectivity Company

26 Rue des Dames

78340 Les Clayes-sous-Bois, France

Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com 86 - 005 G - C T Pressure Range Type (A = Absolute, G = Gage) Electrical (C = Ribbon Cable with Connector, Vent (T = Tube, Blank = No Tube) R = Ribbon Cable, P = Solder Pads) Model