84130108

84145061 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 50

Technical content

• 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 84145061 84145062 84145064 84145066 84145071 Nominal voltage 24Vac/dc 24Vac/dc 120 240 5 - 28 Operating voltage range 19.2-30Vac/dc 19.2-30Vac/dc 95-121Vac/dc 195-253Vac/dc 19.2-30Vac/dc Max input current 20 mA 20 mA 5 mA 5 mA 20 mA Max Voltage 30Vac/36Vdc 30Vac/36Vdc 30Vac/36Vdc 30Vac/36Vdc 30Vac/36Vdc Max current 50 mA 50 mA 50 mA 50 mA 50 mA Operating temperature range -25 to 60°C -25 to 60°C -25 to 60°C -25 to 60°C -25 to 60°C Storage temperature range -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C Turn-On time 8 ms 8 ms 8 ms 8 ms 8 ms Turn-Off time 10 ms 10 ms 10 ms 10 ms 10 ms Switching frequency 10 Hz 10 Hz 10 Hz 10 Hz 10 Hz Mechanical Life (operations) > 10 x 106 > 10 x 106 > 10 x 106 > 10 x 106 > 10 x 106 Electrical Life (number of operation) 6 x 106 6 x 106 6 x 106 6 x 106 6 x 106 Contact Material Contact Arrangement SPDT SPDT SPDT SPDT SPST (N.O.) Note: Exceeding the value given for the output relay current will remove the gold plating from the contacts and therefore we cannot guarantee correct operation at low currents. Dimensions: SPDT SPST Wiring Diagram and Thermal Curves: Accessories 84145061 / 062 / 064 / 066 84145050 84145052 Front Panel marker ( 88 per bag ) 10 postion jumper - Blue 84145071 84145051 84145053

2 Pole "Common" Jumper 10 postion jumper - Red

Input Characteristics (at ambient 25 C°) General characteristics Part numbers Output characteristics (at ambient 25 C°) Products and specifications subject to change without notice. Consult factory for applications assistance. www.crouzet-usa.com

SIMM Series Output Modules * 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 84145001 84145004 84145005 84145010 84145011 84145015 Nominal voltage 24Vdc 110Vac/dc 230Vac 5Vdc 24Vdc 230Vac Operating voltage range 10-44Vdc 70-130Vac/dc 90-230Vac 4-5.5Vdc 10-44Vdc 90-230Vac Max input current 6 mA 7 mA 8.5 mA 6 mA 6 mA 7mA Drop out voltage 5Vdc 30Vac/dc 40Vac 2Vdc 3Vdc 40Vac Operating voltage range 5-48Vdc 5-48Vdc 5-48Vdc 5-48Vdc 5-48Vdc 5-48Vdc Max current 0.5A 0.5A 0.5A 2A 2A 2A Output Type Transistor Transistor Transistor Transistor Transistor Transistor Operating temperature range -20 to 60°C -20 to 60°C -20 to 60°C -20 to 60°C -20 to 60°C -20 to 60°C Storage temperature range -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C Turn-On time 20 us 30 ms 45 ms 1 ms 1 ms 1 ms Turn-Off time 100 us 20 ms 15 ms 5 ms 5 ms 10 ms Switching frequency 1k Hz 10 Hz 10 Hz 10 Hz 10 Hz 10 Hz 84145020 84145021 84145024 84145025 84145031 Nominal voltage 5Vdc 24Vdc 110Vac/dc 230Vac 24Vdc Operating voltage range 4-6.2Vdc 10-44Vdc 70-130Vac/dc 140-250Vac 10-44Vdc Max input current 6mA 6mA 6mA 7mA 6 mA Drop out voltage 2Vdc 3Vdc 35Vac/dc 80Vac 3Vdc Operating voltage range 24-250Vac 24-250Vac 24-250Vac 24-250Vac 24-250Vac Max current 0.5A 0.5A 0.5A 0.5A 1A Output Type Triac Triac Triac Triac Triac Operating temperature range -20 to 60°C -20 to 60°C -20 to 60°C -20 to 60°C -20 to 60°C Storage temperature range -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C Turn-On time 10 ms 10 ms 10 ms 10 ms 8.33 ms Turn-Off time 10 ms 10 ms 10 ms 10 ms 8.33 ms Switching frequency 20 Hz 20 Hz 20 Hz 20 Hz 20 Hz Derating Curves: Dimensions: 84145001 / 004 / 005 84145001 / 004 / 005 Solid State Output: 84145010 / 011 / 015 84145020 / 021 / 024 / 025 84145010 / 011 / 015 84145020 / 021 / 024 / 025 84145031 84145031 General Characteristics Input Characteristics (at ambient 25 C°) Output Characteristics (at ambient 25 C°) Part numbers Part numbers General Characteristics Input Characteristics (at ambient 25 C°) Output Characteristics (at ambient 25 C°) Products and specifications subject to change without notice. Consult factory for applications. www.crouzet-usa.com

SIMM Series Output Modules * 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 84145041 84145042 84145043 84145046 Nominal voltage 24Vdc 24Vac/dc 110Vac/dc 230Vac Operating voltage range 19.2-30Vdc 19.2-30Vac/dc 95-125Vac/dc 195-253Vac/dc Max input current 20 mA 20 mA 5 mA 6 Operating voltage range 1-250Vac 1-250Vac 1-250Vac 1-250Vac Max current 6A 6A 6A 6A Operating temperature range -25 to 60°C -25 to 60°C -25 to 60°C -25 to 60°C Storage temperature range -40 to 80°C -40 to 80°C -40 to 80°C -40 to 80°C Turn-On time 8 ms 8 ms 8 ms 8 ms Turn-Off time 10 ms 10 ms 10 ms 10 ms Switching frequency 10 Hz 10 Hz 10 Hz 10 Hz Mechanical Life (operations) > 10 x 106 > 10 x 106 > 10 x 106 > 10 x 106 Electrical Life (number of operation) 6 x 106 6 x 106 6 x 106 6 x 106 Weight 1.23 oz 1.23 oz 1.23 oz 1.23 oz Contact Material Contact Arrangement SPDT SPDT SPDT SPDT Dimensions: Wiring Diagram and Thermal Curves: Relay Output: 84145041 / 042 / 043 / 046 Accessories 84145050 84145052 Front Panel marker ( 88 per bag ) 10 postion jumper - Blue 84145051 84145053 Input Characteristics (at ambient 25 C°) Output Characteristics (at ambient 25 C°) General Characteristics Products and specifications subject to change without notice. Consult factory for applications. www.crouzet-usa.com

The contactor output is closed when the control voltage is present at the control input terminals. The contactor output is open when there is no voltage at the control input terminals. The LED is lit when the output is active. Impulse relay The impulse relay output changes state on each impulse at the control input terminals, and remains in that state between each impulse. The output changes state on the rising edge of the control state change. The pushbutton on the front can be used to select an operating mode: Automatic (LED lit): Impulse relay function (Auto) Forced operation (LED flashing): output closed (ON) Stop (LED not lit): output open (OFF) Day/night contactor The contactor output is closed when the control voltage is present at the control input terminals. The contactor output is open when there is no voltage at the control input terminals. The pushbutton on the front can be used to select an operating mode: Automatic (LED lit): Day/night contactor function (Auto) Forced operation (LED flashing): output closed (ON) When the control changes state, the day/night contactor reverts to automatic mode. Stop (LED not lit): output open (OFF) Conformity with standards IEC/EN 60947-4-3 (industrial environment) IEC/EN 60669-2-1 (domestic environment) IEC/EN 60601-1 (medical environment) IEC/EN 60947-7-1 (connection for industrial env.) IEC/EN 60998-2-1 (connection for domestic env.) Insulation coordination: Installation category: 3 Degree of pollution: 3 According to IEC 60664-1: 4KV/3 Breakdown voltage according to IEC/EN60669-2-1:

2 KV/1Min / 1mA / 50 Hz

Insulation resistance according to IEC/EN60669-2-1: > 5MΩ /500VDC / 1Min Vibrations according to IEC/EN60068-2-6: frequencies: 10 to 55Hz amplitude: 0.35 mm Voltage 90…260 V a 0…32 V c Frequency 50 / 60 Hz Thresh- OFF control 0 to 46 V a 0 to 1 V c olds ON control 76 to 260 V a 4 to 32 V c Minimum duration 50 ms 50 msof the control Contactor control a 84 138 001 Contactor control c 84 138 000 Impulse relay control a 84 138 101 Day/night contactor control c 84 138 201 Part numbers (and voltages) Input characteristics Voltage 90…260 V a Max. current 20 A in AC1 / AC51 / AC7a Overload current 20 A AC-51 : 1,25 x Ie – 60s : 50 - 30 (IEC 60947-4-3) Min. current 100 mA in AC1 / AC51 / AC7a Frequency 50 / 60 Hz Contact N.O. Number of operations > 5 000 000 Leakage current < 5 mA Acoustic in steady state < 35 dB at 1 m noise on switching < 50 dB at 0.5 m Terminal block clamping 2 x 1.5 mm 2 with ferrule capacity: 2 x 2.5 mm 2 without ferrule 1 x 4 mm2 without ferrule Terminal tightening torque 1 Nm max. M3 screw (IEC60947-1) Operating temperature -5 °C to +55 °C Storage temperature -40 °C to +85 °C Relative humidity 90 to 95 % without condensation Casing material Self-extinguishing Degree of protection IP 50 casing (according to IEC 60529) IP 20 terminal block Weight (g) 70 approx. Output characteristics I 20 A in a case only 17.5 mm wide I Service life > 5 million operations at full load I Silent operation I Functions: contactor – impulse relay – day/night contactor I Clips onto a 35 mm DIN rail I UL/©UL (listed) approval pending I NF-USE label pending I “CE” / Low Voltage Directive conformity Connection Dimensions

13 A 1

24 A 2

90... 260V 44 5,5 17,5 To order, specify: Standard products Example : Solid state relays - RHP - 84 138 001

1 Part number

90… 260 V a/4… 32 V c

To order, specify: Part number Accessory Exemple: Two-phase solid state relay 25 A 84 130 210 - DIN rail adaptor 26 532 764 Standard products Standard products, non stocked Part numbers Two-phase relays 25 A Switching Output Input Connection voltage voltage diagram Zero voltage 24 - 280 Va 4 - 15 Vc B 84 130 210 Instantaneous 24 - 280 Va 4 - 15 Vc B 84 130 211 Two-phase relays 40 A Switching Output Input Connection voltage voltage diagram Zero voltage 24 - 280 Va 4 - 15 Vc D 84 130 230 Instantaneous 24 - 280 Va 4 - 15 Vc D 84 130 231 Zero voltage 36 - 530 Va 4 - 15 Vc D 84 130 240 Instantaneous 36 - 530 Va 4 - 15 Vc D 84 130 241 Zero voltage 24 - 280 Va 4 - 15 Vc C 84 130 250 Instantaneous 24 - 280 Va 4 - 15 Vc C 84 130 251 Zero voltage 36 - 530 Va 4 - 15 Vc C 84 130 260 Instantaneous 36 - 530 Va 4 - 15 Vc C 84 130 261 Zero voltage 24 - 280 Va 4 - 15 Vc B 84 130 270 Instantaneous 24 - 280 Va 4 - 15 Vc B 84 130 271 Zero voltage 36 - 530 Va 4 - 15 Vc A 84 130 280 Instantaneous 36 - 530 Va 4 - 15 Vc A 84 130 281 Accessories (see catalogue pages 4/30 to 4/32) Heatsinks Heat transfer compound 18 373 112 DIN rail adaptor 26 532 764 Quick-blow fuses Thermal dissipation curves Two-phase (dual) solid state relays - GD range Output specifications Voltage range (Vrms max) 24-280 24-280 36-530 Peak voltage (t=1 min.) (Vpeak) 600 600 1200 Maximum current (Vpeak) 25 40 40 Maximum current(mArms) 7 7 7 Minimum current (mArms) 100 100 100 Max. 1-cycle surge 250 500 500 T=25°C (A peak) Max. 1-second surge 67 145 135 T=25°C (A peak) On-state voltage drop 1.6 1.6 1.6 at Imax and T=25°C (Vpeak) I 2t (t=10ms) A2s 260 1260 1260 Thermal resistance - 1.5 0.25 0.25 Junction to casing (°C/W) Static (off-state) dv/dt (Vµs) 500 500 500 Supply frequency range (Hz) 47-63 47-63 47-63 cos ϕ (Zero voltage) > 0.5 > 0.5 > 0.5 Input specifications Input voltage(V) 4-15 cc Drop-out voltage (V c)1 Maximum current 32 --(at Vmax) (mA) Response time (close) Zero voltage switching (ms) 10 Instantaneous switching (ms) 0,1 Response time (open) Zero voltage switching (ms) 10 Instantaneous switching (ms) 10 Characteristics Operating temperature (°C) -20 à +80 Storage temperature (°C) -40 à +100 Input to output insulation voltage (Vrms) 4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 5 5 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 450 Equivalent circuits I For controlling three-phase supplies I Controls two or three phases of the supply I Applied to star or delta-connected two-phase resistances with neutral not connected I Rating 25 A and 40 A I Output voltages from 24 to 280 V and 36 to 530 V I Back-to-back SCRs I Zero voltage switching I Input to output insulation voltage: 4000 V I Protection by RC filter I UL - cUL approval and CE marking 0 1 02 02 53 04 05 06 07 08 0 °C 0,5 °C/W1°C/W2 °C/W 5 °C/W 25 A 5° C/W 2° C/W 1,5 ° C/W 1° C/W 0,5 ° C/W 0 1 02 02 53 04 05 06 07 08 0 40 A Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Two-phase (dual) solid state relays - GD range 47,6 57,2 34,7 44,5 22,2 4,8 Ø 4,7 19,5 32,5 25,6 47,6 57,2 15,7 6,35 29,7 44,5 22,2 12,2 4,8 Ø 4,7 24,4 32,5 27,9 44,5 OUTPUT A OUTPUT B 28,6 Ø 4,85 57,2 47,6 8,4 46,5 28,8 18,3 22,2 Ø 4,7 32,5 25,6 Dimensions AB C D 44,5 OUTPUTA OUTPUTB 27,9 Ø 4,5 57,2 43,4 4,8 R6,7 22,2 23,2 25,6 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 9 Solid state relays For accessories see page 4/10 GD two-phase (dual) relay To order n For controlling three-phase supplies n Controls two or three phases of the supply n Used on star or delta-connected two-phase resistors with neutral not connected n Rating 25 A n Output voltages from 24 to 280 V n Back-to-back SCRs n Zero voltage switching n Input to output insulation voltage : 4000 V n Protection by RC filter n UL/CSA and CE approved Zero voltage switching 25 A 24 • 280 V a 4 • 15 V c 600 V Instantaneous switching 25 A 24 • 280 V a 4 • 15 V c 600 V Zero voltage switching 40 A 24 • 280 V a 4 • 15 V c 600 V Instantaneous switching 40 A 24 • 280 V a 4 • 15 V c 600 V Versions Rating Output voltages Input voltages Peak voltages 84 130 210 84 130 211 84 130 230 84 130 231 Part number Thermal curves Dimensions 0 1 02 02 53 04 05 06 07 08 0 0,5 °C/W1 °C/W 2 °C/W 5 °C/W ms 47,6 57,2 25,4 44,5 22,2 27,95,8 4,8 Ø4,7 24,115,2 7,6 2,3 Heatsinks Accessories for solid state relays 3,8 4 x 10,35 10,5 67,5 112 1 phase G, GA5, GT, GF 2 °C/W L = 70 mm 260 g Material : black anodised aluminium 1 phase G, GA5, GT, GF 3 °C/W L = 58 mm 250 g Material : black anodised aluminium 3 phases 2 x G, GA5, GT, GF 0.7 °C/W L = 75 mm 655 g or 2 x 1 phase 1 x GA0, GA3 Material : black anodised aluminium 1 phase G, GA5, GT, GF , GN 2 °C/W L = 50 mm 150 g Material : black anodised aluminium Range Thermal resistance Length Weight 26 532 760 Part number 26 532 761 26 532 762 26 532 758 26 532 801 To order Adaptors for panel mounting (lot of 4) For heatsink 26 532 758 47,6 7,3 ±0,15 4,4 ±0,2 76,2 26 532 760 26 532 761 26 532 762 26 532 758 26 532 801 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 10 Accessories for solid state relays (continued) DIN rail adaptor 47,6 8,7 Suitable for use with heatsinks 55 g 26 532 760, 26 532 761 and 26 532 762 Characteristics Weight 26 532 764 Part number Part number Part number Part number 2 x M4 To order To order To order To order Heat transfer compound silicon/zinc 20 g oxide paste Material Weight 18 373 112 Part number Solid state relay protection To order Varistor GA5 - G (24 - 280 V a) In lots of 10 GA3 - G (36 - 530 V a In lots of 10 and 48 - 660 V a) GA0 Single Type 26 532 740 26 532 741 26 532 742 Fuses GMS 3 A and C 4 In lots of 10 for GMS 5 A In lots of 10 GMS relays 26 532 730 26 532 731 Part number To order Characteristics Part number - For G, GA5, GF and GT ranges - For the 3-phase GA0 range and the GA3 range 26 532 720 26 532 721 To order Thermstrate® thermal interface pads Ø 3,9 38,48 38,48 73,4 1,7821,59 8,89 51,94 27,34 6,35 6,35 11,43 27,34 51,94 R 7,62 R 6,35 Protective covers polycarbonate UL 94 V0 Material Fits GA3 range Fits GA0 range 26 532 796 26 532 797 26 532 798 Ø 3,9 38,48 38,48 73,4 1,7821,59 8,89 51,94 28,57 6,35 11,43 29,54 51,94 R 7,62 R 6,35 30,6 29,59 polycarbonate UL 94 V0 Material 30,73 36,83 18,54 13,34 26,67 24,13 24,13 25,40 13,34 36,83 polycarbonate UL 94 V05 g Material Weight Fits G, GA5, GF and GT ranges Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 6 Solid state relays G range For accessories see page 4/9 and 4/10 For dimensions see page 4/8 To order n Current from 10 to 90 A n Output voltages from 24 to 660 V~ n Back-to-back SCRs n Input voltage 90-280 Va c or 3-32 V c n Peak voltage up to 1200 V n Zero voltage or instantaneous switching n Input to output insulation voltage: 4000 V n Protection by RC filter n UL recognised and CSA approved Version Rating Output voltages Input voltages Peak voltages Part number Thermal curves G range, 24 • 280 V a 10 A G range, 36 • 530 V a 10 A G range, 24 • 280 V a 25 A 3 6 9 12 10 20 30 40 50 60 70 1°C / W 2°C / W 3°C / W 4°C / W 5°C / W 8°C / W 6°C / W 7°C / W 10°C / W 20°C / W 100 105 110 115 120 800 On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C Dissipated power (W) Baseplate temperature °C No heatsink 100 110 0 2 4 6 8 1 01 0 2 03 04 0 5 06 0 7 08 0 3°C / W 5°C / W10°C / W 120 51 0 1 5 2 0 1°C / W 2°C / W 4°C / W 3°C / W 0 1 02 03 04 05 06 07 0 80 G range, 36 • 530 V a, 48 • 660 V a 25 A G range, 24 • 280 V a 45 A G range, 36 • 530 V a, 48 • 660 V a 50 A 100 110 800 5 10 15 20 10 20 30 40 50 60 70 120 1°C / W 2°C / W 3°C / W 5°C / W G range, 75 A G range, 90 A 100 112 0 5 15 25 55 6535 45 10 20 30 40 50 60 70 80 1°C / W 0,5 °C / W 2°C / W 105 115 125 135 0 1 02 03 04 05 06 07 08 0 1 0 2 03 04 05 06 07 0 80 1°C / W 1°C / W 0,5 °C / W 2°C / W 0 5 10 15 20 25 30 35 40 10 20 30 40 50 60 70 80 1°C / W 0,5 °C / W 2°C / W 3°C / W 1°C / W 0,5 °C / W 2°C / W 0 5 10 15 20 25 30 35 40 45 10 20 30 40 50 60 70 80 On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C Dissipated power (W) Baseplate temperature °C No heatsink No heatsink On-state current (A) Ambient temperature (° C) On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C Dissipated power (W) Baseplate temperature °C On-state current (A)Ambient temperature (° C) On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C Dissipated power (W) Baseplate temperature °C Zero voltage switching 10 A 24 • 280 V a 3 • 32 V c 600 V 90 • 280 V a c 600 V 36 • 530 V a 3 • 32 V c 1200 V

25 A 24 • 280 V a 3 • 32 V c 600 V

24 • 280 V a 90 • 280 V a c 600 V 36 • 530 V a 3 • 32 V c 1200 V

45 A 24 • 280 V a 3 • 32 V c 600 V

90 • 280 V a c 600 V

50 A 36 • 530 V a 3 • 32 V c 1200 V

90 • 280 V a c 1200 V 48 • 660 V a 3 • 32 V c 1200 V

75 A 24 • 280 V a 3 • 32 V c 600 V

90 • 280 V a c 600 V 36 • 530 V a 3 • 32 V c 1200 V

90 A 36 • 530 V a 3 • 32 V c 1200 V

Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… GA5 range n TRIAC low-cost solid state relay n Input voltage 3-32 V c or 90-280 Va c n Peak voltage: 600 V n UL/CSA approved n Certain models are VDE approved n Input to output insulation voltage: 4000 V n Protection by RC filter Zero voltage switching 10 A 24 • 280 V a 3 • 32 V c 600 V 90 • 280 V a c 600 V Zero voltage switching 25 A 24 • 280 V a 3 • 32 V c 600 V 90 • 280 V a c 600 V Faston tag connectors Zero voltage switching 10 A 24 • 280 V a 3 • 32 V c 600 V

25 A 24 • 280 V a 90 • 280 V a c 600 V

EMC level 3 10 A 24 • 280 V a 3 • 32 V c 600 V Versions Rating Output voltages Input voltages Peak voltages 84 061 231 84 061 233 84 061 431 84 061 433 84 061 531 84 061 631 84 131 900 84 131 910 Part number Thermal dissipation curves GA5 range - 10 A GA5 range - 25 A 105 112 119 4 6 8 10 20 30 40 50 60 70 8010 2°C / W 3°C / W 4°C / W 5°C / W 6°C / W 7°C / W 8°C / W 10°C / W 20°C / W On-state current (A) No heatsink Ambient temperature °C Baseplate temperature °C Baseplate temperature °C Dissipated power (W) Dissipated power (W) 5 1 0 1 5 2 0 1 0 2 03 0 5 06 07 04008 0 °4°C/W °2°C/W °3°C/W On-state current (A) Ambient temperature °C To order For accessories see page 4/9 and 4/10 For dimensions see page 4/8 GAO range three-phase motor reversing relay To order n Reverses rotation of three-phase motors n Output voltage 24-480 V~ n Input voltage 3-32 Vc n Reversal delay : 100ms n Interlock against simultaneous actuation in both directions n Back-to-back SCRs n Input to output insulation voltage: 5000 Va n Protected by RC filter and overvoltage limiter n Direction of rotation displayed by 2 green LEDS For accessories see page 4/9 and 4/10

25 A 24 • 480 V a 3 • 32 V c

Rating Output voltage Input voltage 84 067 441 Part number Thermal curves GAO range - 25 A Dimensions (General tolerances ± 0.5) 51 0 1 5 2 0 1 0 25 20 30 40 50 60 70 80 0,5° C / W 1° C / W 2° C / W 3° C / W 104 5,3 12,1 92 6,35 73,5 47,6 7,62 22,6 18,5 L1 U L2 V A1F A2 A1R On-state current (A) Ambient temperature (° C)

4 M4 screws

Dissipated power (W) Baseplate temperature °C No heatsink 3 M3.5 screws Solid state relays Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 8 GF range Solid state relays 110 150 20 4 6 8 10 10 20 30 40 50 60 70 80 0,5°C / W 1°C / W 2°C / W 5°C / W 10°C / W 306 9 1 2 1 0 15 20 30 40 50 60 70 80 110 130 150 0,5°C / W1°C / W 2°C / W 5°C / W 10°C / W To order n Solid state relay for DC applications n FET output - 10 A, 15 A, 30 A n Very low leakage current (<10µA) n Very low on-state resistance (minimises heating) n Input to output insulation voltage : 1500 V n Protection against polarity reversal For accessories see page 4/9 and 4/10 For dimensions see below

10 A 1 • 200 V c 3 • 32 V c

15 A 1 • 100 V c 3 • 32 V c

30 A 1 • 50 V c 3 • 32 V c

Rating Output voltages Input voltages 84 062 291 84 062 381 84 062 571 Part number Thermal curve GF range - 10 A GF range - 15 A GF range - 30 A 0 5 10 15 20 25 30 10 20 30 40 50 60 70 110 130 140 150 0,5°C / W 1°C / W 2°C / W 5°C / W 10°C / W

10 A 3 • 60 V c 3 • 32 V c

Rating Output voltage Input voltage 84 063 261 Part number Dimensions (General tolerances ± 0.5) G - GA5 - GF and GT ranges - 15 A GT range To order n Solid state relay for DC applications n Transistor output - 10 A n Response time < 25µs n Input voltage 3-32 V c n UL/CSA approved n Input to output insulation 4000 Va For accessories see page 4/9 and 4/10 Thermal curve GT range - 10 A 105 130 150 20 4 6 8 10 20 30 40 50 60 70 8010 1°C / W 2°C / W 5°C / W 10°C / W 44,5 27,9 Ø4,5 57,2 43,2 4,8 47,6 25,4 R6,7 2,3 24,1 MAX 1 2 -4 3+ 8/32" 6/32" On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C No heatsink On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C No heatsink No heatsink On-state current (A) Ambient temperature (° C) Dissipated power (W) Baseplate temperature °C No heatsink Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

For other products, consult our specialist catalogues… For other products, consult our specialist catalogues… 4 11 Solid state I/O modules Solid state I/O modules represent a reliable control system solution which is simple to install for interfacing different voltage levels. Output modules Output modules can be used to control AC or DC loads using DC low-voltage logic input signals. They can control loads of up to 5 A, and can be used over a very wide voltage range, from 5 to 48 VDC and from 120 to 240 VAC. The control input for these modules is compatible with standard logic levels (TTL, CMOS, etc). This makes them ideally suited to act as an interface and isolation device between one digital command (microprocessor or other), a medium-power circuit (heatsink, motor, etc), a preactuator (contactors, solenoid valves) or a signalling device (indicator lamps, audible alarms, etc Input modules Input modules can be used to determine the status of an AC or DC load by producing a low-voltage logic output signal. Practical Clever use of colour means the function of an I/O can be identified immediately, greatly simplifying module identification. Colours n white : DC input module n yellow : AC input module n red : DC output module n black : AC output moduleDC logic input SOLID STATE OUTPUT MODULE AC or DC output AC or DC input SOLID STATE INPUT MODULE DC logic output Solid state I/O modules Standard range (15.24 mm) IAC5 5 V c 120 V a IAC5A 5 V c 240 V a IDC5 5 V c 5 - 28 V c IDC5N 5 V c 12 - 48 V c IAC24A 24 V c 240 V a Range Type Output voltages Input voltages 84 110 110 84 110 111 84 110 210 84 110 212 84 110 131 Part number To order M range MIAC5 5 V c 120 V a MIACEA 5 V c 240 V a MIDC5 5 V c 5 - 28 V c MIDC5N 5 V c 12 - 48 V c 84 111 110 84 111 111 84 111 210 84 111 212 43.2 x 31.8 x 15.2 mm 43.2 x 25.4 x 10.2 mm SM range SMIAC5 5 V c 120 V a SMIAC5A 5 V c 240 V a SMIDC5 5 V c 5 - 28 V c SMIDC5N 5 V c 12 - 48 V c 84 113 110 84 113 111 84 113 210 84 113 212 43.2 x 25.4 x 10.2 mm DC input module (white) AC input module (yellow) DC output module (red) AC output module (black) Solid state input modules Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

a 12 - 140 V a

400 Vpeak

3.5 Arms

100 Apeak

1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 Other information UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/60 to 4/69. OAC5 84 110 310 2.75 - 8 220 120 V a 12 -140 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 OAC5AH 84 110 011 2.75 - 8 220 240 V a 24 - 280 V a

600 Vpeak

5 Arms

1.6 -30 +80 -40 +100 0.1 8.33 4000 47 - 63 OAC5A 84 110 311 2.75 - 8 220 240 V a 24 - 280 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 ODC5 84 110 410 2.75 - 8 250 5 - 48 V c 3 - 60 V c

60 V c

10 µA 3 A 10 mA 5 A 1.5 -30 +80 -40 +100 0.1 0.75 4000 c V c V c V c mA Ω V/µs V ms ms V a pF Hz Types Part numbers Input characteristics(at ambient 25 °C) Nominal control voltage Control voltage range Voltage drop Operating current Internal resistance Output characteristics(at ambient 25 °C) Nominal voltage Operating voltage range Peak voltage Max leakage current Static dv/dt - off-state Output current Holding current Current surge (for 1 cycle in a and 1 s in c) Voltage drop - on-state General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Connections I Single channel plug-in module I Input : 5 V cc or 24 V cc I Output :aa TRIAC

110 V aa or 240 V aa

I Current : 3 to 5 A I Synchronous switching I Standard industrial casing Output modules - Standard range 15.24 mm 3,3k + Rc+ V a V a Logic power supply V c Input * The load may be wired on A or B. Load* (A) Load* (B) Screw terminal LED

5 A fuse

3,3k + Rc + V c - V c Logic power supply V c Input * The load may be wired on A or B. To avoid damage to the I/O module, inductive DC loads must not contain a diode. Load* (A) Load* (B) Screw terminal LED a output module c output module Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

a 24 - 280 V a 3.5 mArms 50 mArms 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 ODC24 84 110 430 18 - 32 2000 5 - 48 V c 3 - 60 V c 10 µA 3 A 10 mA 5 A 1.5 -30 +80 -40 +100 0.025 0.05 4000 c Ø 1,1 6,4 31,8 1234 43,2 25,4 7,6 17,8 30,5 35,6 2,5 15,2 7,6 Fixing screws Ø 4 x40 Dimensions Dimensions in mm. Tolerance : ± 0.50. Casing colour : a: Black c: Red To order, specify : Part number Example : Output module - Standard range 15.24 mm - 84 110 310 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

I Single channel plug-in module I Input : 110 V aa, 240 V aa, 5 - 28 V cc, 12-48 V cc I Open collector output : 5 V cc or 24 V cc I Standard industrial casing Other information IAC5E 84 110 112

24 V a

1.5 mArms 10 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 IDC5N 84 110 212 12 - 48 V c 10 - 60 V c 34 mA 1 mA 1.5mA 4 V c 3 - 6 0.2 -30 +80 -40 +100 4000 c IAC5 84 110 110

120 V a

2.5 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 IAC5A 84 110 111 240 V a 180 - 280 V a 5 mArms 1.5 mArms 2 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 IDC5 84 110 210 5 - 28 V c 3.3 - 32 V c 34 mA 1 mA 1.5 mA 2 V c 3 - 6 0.2 -30 +80 -40 +100 4000 c Types Part numbers Input characteristics (at ambient 25 °C) Nominal voltage Operating voltage range Max input resistance Max input current Current drop Current authorised when not operating Voltage authorised when not operating Output characteristics (at ambient 25 °C) Logic voltage Logic voltage range Max logic current Max Ipower supply output in OFF state Max output transistor voltage Max output transistor current Max leakage current Residual voltage General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Connections kΩ V c V c mA µA V c mA µA V c ms ms V a pF Hz Input modules - Standard range 15.24 mm UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/60 to 4/69. 3,3k +Logic power supply V c Output Logic ground (common) V a V a Screw terminal Part of a PB series I/O module Mounting board Plug-in module a input Schmitt trip device 3,3k + + Logic power supply V c Output Logic ground (common) + V c + V c Screw terminal LED a input module c input module Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

1.5 mA 4 V c 20 - 30 0.2 -30 +80 -40 +100 4000 c IDC24 84 110 230 5 - 28 V c 3.3 - 32 V c 34 mA 1 mA 1.5 mA 2 V c 20 - 30 0.2 -30 +80 -40 +100 4000 c IAC24 84 110 130 2.5 mArms 50 V a 20 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 IAC24A 84 110 131

240 V a

1.5 mArms 2 mArms 50 V a 20 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 Dimensions Dimensions in mm. Tolerance : ± 0.50. Ø 1,1 6,4 31,8 12345 43,2 25,4 40,6 7,6 17,8 30,5 35,6 2,5 15,2 7,6 Casing colour : a : Yellow c : White Fixing screws Ø 4 x 40 To order, specify : Part number Example : Input module - Standard range 15.24 mm - 84 110 110 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

2.75 - 8 250 240 V a 24 - 280 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 I Single channel plug-in module I Input : 5 V cc or 24 V cc I Output :110 V aa / 240 V aa, 5-48 V cc I Current : 3 to 5 A aa cc I Standard industrial casing Output modules - SM range SMOAC5 84 113 310 2.75 - 8 220 120 V a 12 -140 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 SMOACAH 84 113 011 2.75 - 8 220 240 V a 24 - 280 V a 1.6 -30 +80 -40 +100 0.1 8.33 4000 47 - 63 SMOAC5A 84 113 311 2.75 - 8 220 240 V a 24 - 280 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 SMODC5 84 113 410 2.75 - 8 250 5 - 48 V c 3 - 60 V c 10 µA 3 A 10 mA 5 A 1.5 -30 +80 -40 +100 0.1 0.75 4000 c Types Part numbers Input characteristics(at ambient 25 °C) Nominal control voltage Control voltage range Voltage drop Operating current Internal resistance Output characteristics(at ambient 25 °C) Nominal voltage Operating voltage range Peak voltage Max leakage current Static dv/dt - off-state Output current Holding current Current surge (for 1 cycle in a and 1 s in c) Voltage drop - on-state General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Connections V c V c V c mA Ω V/µs V ms ms V a pF Hz 3,3k + Rc+ V a V a Logic power supply V c Input * The load may be wired on A or B. Load* (A) Load* (B) Zero voltage circuit 3,3k + Rc + V c - V c Logic power supply V c Input * The load may be wired on A or B. To avoid damage to the I/O module, inductive DC loads must incorporate a freewheel diode. Load* (A) Load* (B) Screw terminal LED UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/74 to 4/78. a output module c output module Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

a 24 - 280 V c 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 SMOAC24 84 113 330 18 - 32 2000 120 V a 12 - 140 V a 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 SMODC24 84 113 430 18 - 32 200 5 - 48 V c 3 - 60 V c 10 µA 3 A 10 mA 5 A 1.5 -30 +80 -40 +100 0.1 0.75 4000 c Dimensions Dimensions in mm. Tolerance : ± 0.50. Ø 1,1 5,97 25,4 1234 43,2 7,6 17,8 30,5 10,2 5,1 0,89 2,9 2,5 35,6 25,4Plastic clip fitting into a 2.4 mm hole To order, specify : Part number Example : Output module - SM range - 84 113 310 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

1.5 mArms 10 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 I Single channel plug-in module I Input : 24 V aa / 110 V aa / 240 V aa 5-28 V cc / 12-48 V cc I Output : open collector

5 V cc or 24 V cc

I Standard industrial casing Input modules - SM range SMIAC5 84 113 110 120V a 90 - 140 V a 5 mArms 2 mArms 2.5 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 SMIAC5A 84 113 111 1.5 mArms 2 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 SMIDC5 84 113 210 5 - 28 V c 3.3 - 32 V c 34 mA 1 mA 1.5 mA 2 V c 3 - 6 0.2 -30 +80 -40 +100 4000 c SMIDC5N 84 113 212 12 - 48 V c 10 - 60 V c 34 mA 1 mA 1.5 mA 4 V c 3 - 6 0.2 -30 +80 -40 +100 4000 c Types Part numbers Input characteristics(at ambient 25 °C) Nominal voltage Operating voltage range Max input resistance Max input current Current drop Current authorised when not operating Voltage authorised when not operating Output characteristics(at ambient 25 °C) Logic voltage Logic voltage range Logic current Max Ipower supply output in OFF state Max output transistor voltage Max output transistor current Max leakage current Residual voltage General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Connections kΩ V c V c mA µA V c mA µA V c ms ms V a pF Hz 3,3k +Logic power supply V c Output Logic ground (common) V a V a Screw terminal 3,3k + + Logic power supply V c Output Logic ground (common) V c V c Screw terminal LED UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/74 to 4/78. a input module c input module LED Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

2.5 mArms 50 V a 20 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 SMIAC24A 84 113 131 240 V a 180 - 280 V a 5 mArms 1.5 mArms 2 mArms 50 V a 20 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 SMIDC24 84 113 230 5 - 28 V c 3.3 - 32 V c 34 mA 1 mA 1.5 mA 2 V c 20 - 30 0.2 -30 +80 -40 +100 4000 c Dimensions Dimensions in mm. Tolerance : ± 0.50. Ø 1,1 5,97 25,4 12345 43,2 40,6 7,6 17,8 30,5 35,6 10,2 5,1 0,89 2,9 2,5 25,4Plastic clip fitting into a 2.4 mm hole Casing colour : a : Yellow c : White To order, specify : Part number Example : Input module - SM range - 84 113 110 Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Other information To order, specify : C4IAC 84 116 110 22 kΩ 2.5

50 V a

4.5 - 30 4.5 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 I New industrial standard I Status display LED I Single channel plug-in module I Input : 110 V aa or 240 V aa 10-32 V cc or 4-16 V cc I Regulated output : 4.5 to 30 V cc Input modules - C4 range Types Part numbers Input characteristics(at ambient 25 °C) Nominal control voltage Operating voltage range Max input resistance Max input current Current drop Min turn-on current Min turn-on voltage Output characteristics(at ambient 25 °C) Logic voltage Logic voltage range Max logic current Max Ipower supply output in OFF state Max output transistor current Max leakage current Residual voltage General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation Operating frequency Wiring diagram mA mA mA V c V c mA µA mA µA V c ms ms V a Hz C4IACA 84 116 111 75 kΩ 0.7 4.5 - 30 4.5 - 30 0.2 -30 +80 -40 +100 4000 47 - 63 C4IDC 84 116 210 10 - 32 V c 10 - 32 V c 2 kΩ 1.5

3 V c

4.5 - 30 4.5 - 30 0.2 -30 +80 -40 +100 4000 c C4IDCB 84 116 211 4 - 16 V c 4 - 16 V c 400 Ω 0.7

1 V a

4.5 - 30 4.5 - 30 0.2 -30 +80 -40 +100 0.05 0.1 4000 c 4,7k + + Rc Ø 1,07 5,08 41,15 44,45 38,10 12 3 45 48,77 47,44 39,37 4,07 10,16 5,07 16,50 29,21 3,56 5,08 UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/79 to 4/83. Standard products Part number Example : Input module - C4 range - 84 116 110 Input V a or V c Logic power supply c Logic ground (common) V c Mounting board Screw terminal LED Connector Module Dimensions Output Fixing screws Ø 4 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

20,32 1,27 1,27 Ø 1,07 5,08 41,15 44,45 38,10 12 3 4 48,77 47,44 34,30 9,14 5,09 11,44 24,14 3,56 5,08 4,7k + Rc 4,7k + Rc C4OAC 84 116 310 4 - 32 Regulated input

3 Arms

1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 I New industrial standard I Status display LED I Single channel plug-in module I Replaceable protective fuse I Regulated input : 4 to 32 V cc I Output : 110 V aa or 220 V aa 5-48 V cc I Current : 3 A Output modules - C4 range Types Part numbers Input characteristics Nominal control voltage Voltage drop Maximum current Input resistance Output characteristics Nominal voltage Operating voltage range Peak voltage Max leakage current dv/dt Output current Holding current Current surge (for 1 cycle in a and 1 s in c) Voltage drop - on-state General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Wiring diagrams V c V c mA V/µs V ms ms V a pF Hz C4OACA 84 116 311 4 - 32 Regulated input 1.6 -30 +80 -40 +100 8.33 8.33 4000 47 - 63 C4ODC 84 116 410 4 - 32 Regulated input 5 - 48 V c 5 - 60 V c 10 µA 3 A 10 mA 5 A 1.6 -30 +80 -40 +100 0.05 0.05 4000 c Dimensions Other information To order, specify : UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/79 to 4/83. Standard products Part number Example : Output module - C4 range - 84 116 311 a output module c output module Mounting board Screw terminal Load or Load Zero voltage circuit Screw terminal V a output V c output + V c Module Mounting board Module Load or Load + V c ConnectorConnector AmpliLED Fixing holes Ø 4 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

1.5 mArms 10 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 5,1 73,2 12,7 5,1 11,43 26,9 8 9 10 11 12 13 1 2 3 4 5 6 47,5 53,3 7,6 5,1 10,2 22,9 27,9 Ø 6,3514 14 12 10 9 11 813 753 2 416 14 12 10 9 11 813 65 3 2 1 47 Logic ground Output Output Input

4 Common Input

2 Common Input

(-) Input 3 + V c Logic ground Output Output Input 2 + Common (-) Input 1 + V c I 4-channel plug-in module I Status display LED I Input : 24 V aa / 110 V aa / 240 V aa 12 to 48 V cc 5 to 28 V cc I Output : 5 V cc I Standard industrial casing Input modules - Quad-Pack range IAC5Q 84 112 110 2.5 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 IAC5AQ 84 112 111 1.5 mArms 2 mArms 50 V a 3 - 6 0.2 -30 +80 -40 +100 4000 47 - 63 IDC5Q 84 112 210 12 - 48 V c 10 - 60 V c 34 mA 1 mA 1.5 mA 4 V a 3 - 6 0.2 -30 +80 -40 +100 4000 c IDC5BQ 84 112 214 5 - 28 V c 4 - 32 V c 0.5 68 mA 1 mA 1.5 mA 2 V a 3 - 6 0.2 -30 +80 -40 +100 0.05 0.1 4000 c Types Part numbers Input characteristics(at ambient 25 °C) Nominal voltage Operating voltage range Max input resistance Max input current Current drop Current authorised when not operating Voltage authorised when not operating Output characteristics(at ambient 25 °C) Logic voltage Logic voltage range Max logic current Max Ipower supply output in OFF state Max output transistor voltage Max output transistor current Max leakage current Residual voltage General characteristics Temperature Use limits Stored Response time Turn-on Turn-off I/O isolation I/O capacity (typical) Operating frequency Connections Ω V c V c mA µA V c mA µA V c ms ms V a pF Hz Dimensions Dimensions in mm. Tolerance : ± 0.50 Countersunk head screw Pins Ø 1,1 84 112 110 - 111 - 112 84 112 210 / 214 Casing colour : a : Yellow c : White Other information To order, specify : UL approved (E46203) / CSA certified (38595) For mounting boards, see pages 4/84 to 4/89. Part number Example : Input module - Quad-Pack range - 84 112 110 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Zero voltage switching (outputa) Rating Output Input

3 A 5-48 V c 4-32 V c 84 130 104

5 A 12-280 V a 4-32 V c 84 130 105

5 A 12-280 V a 4-32 V c 84 130 108

Solid state relays 17.5 mm for DIN rail mounting - GMS range To order, specify : I Complete, compact units I DIN rail and panel mounting I Rating: 5 Aaa or 3 Acc I Output voltage 12-280 V aa or 5-48 V cc I Input voltage 4-32 V cc regulated I Input to output insulation voltage: 4 kV I LED display of input status I Replaceable protection fuse I UL - cUL approval and CE marking Output specifications Triac Transistor Voltage range (Vrms max) 12-280 aa 5-48 cc Peak voltage (t=1 min.) (V peak) 600 a 60 c Maximum off-state leakage 2 mArms 10 µA (at Vmax and T = 25 °C) Maximum current (Arms) 5 3 Minimum current (mArms) 50 10 Max. 1-cycle surge 100 5 T=25°C (V peak) On-state voltage drop 1.6 1.6 at Imax and T=25°C (V peak) I 2t (t = 10 ms) (A2s) 600 - Static (off-state) dv/dt (V/µs) 200 n/a Rth junction/ambient air 20.3° C/W 22.6° C/W Input specifications Input voltage (V) 4-32 cc 4-32 cc Drop-out voltage 1V c 1V c Maximum current 22 16 (at Vmax) Nominal input resistance Regulated input Response time < 10 ms 50 µs (close) Response time < 10 ms 50 µs (open) Characteristics Operating temperature (° C) -30 to +80 Storage temperature (° C) -40 to +100 Input to output insulation voltage (Vrms)4000 Input/output capacitance (pF) 8 Replaceable protection fuse Y es Y es LED display of input status Y es Y es of input status Capacity of input with ferrule : 2 x 1.5 mm and output terminals without ferrule : 2 x 2.5 mm 2 1 x 4 mm2 For replacement fuses, see page 4/32 10 20 30 40 50 60 70 3 + 3 + Ambient temperature (°C) Rating Arms) 10 20 30 40 50 60 70 Ambient temperature (°C) Rating (Arms) 49,5 40,65 17,5 Part number Example: Solid state relay - GMS range - 84 130 104 LEDLED Equivalent circuits outputa outputc Curves for temperature-dependent derating outputa outputc Dimensions Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Standard products, non stocked Standard products Part numbers Zero voltage switching Rating Output Input Triac SCR voltage voltage

12 A 24-280 Va 180-280 Va c 84 130 100

25 A 24-280 Va 180-280 Va c 84 130 102

25 A 48-660 Va 180-280 Va c 84 130 118

25 A 48-660 V a 4-32 Vc 84 130 117

Thermal dissipation curves GRD range - single-phase GRD range - single-phase with triac with SCR Zero voltage switching Instantaneous switching Curves for temperature-dependent derating GRD range 22.5 mm - 12 A (Triac) GRD range 22.5 mm - 25 A (Triac) 25 A (SCR) I Single phase I Complete, compact units I Tailor-made solution to current sinks I DIN rail and panel mounting I Rating: 12 and 25 A (Triac) - 25 A ( SCR) I Protection by RC filter I Optional protection by removable varistor I LED display of input status I UL - cUL approval and CE marking Output specifications Triac SCR Voltage range (Vrms max) 24-280 48-660 Peak voltage (t=1 min.) (Vpeak) 600 1200 Maximum current (A) 12 - 25 25 Maximum off-state leakage 15 20 (at Vmax and T = 25 °C) Minimum current (mArms) 50 100 Max. 1-cycle surge 100 - 250 750 T=25°C (A peak) Max. 1-second surge 30 - 75 145 T=25°C (A peak) On-state voltage drop 1.6 1.6 at Imax and T=25°C (Vpeak) I 2t (t=10ms) A2s) 312 - 750 1250 Static (off-state) dv/dt (Vµs) 200 500 Supply frequency range (Hz) 47 to 80 47 to 80 cos ϕ (Zero voltage) > 0.5 > 0.5 Rth junction/ambient air 4.9 - 3.6° C/W 2.5° C/W Input specifications Input voltage (V) 90-280 aa cc 4-32 cc Drop-out voltage 10 Vrms 1V c Maximum current 5.5 mArms 12 mA (at Vmax) Nominal input resistance 45 k Ω 3 kΩ Response time 20 ms 0.5 cycle max. (close) Response time 30 ms 0.5 cycle max. (open) For instantaneous switching models, turn-on time is less than 100 µs Characteristics Operating temperature (° C) -20 to +80 Storage temperature (° C) -40 to +100 Input to output insulation voltage (Vrms)4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 250 Terminal capacity Ø 2 mm max. Dimensions Solid state relays with integrated heatsink, DIN rail mounting - GRD range 22.5mm I(A) t (° C) 0 1 02 0 3 04 05 06 07 0 U U 01 0 2 5 4 0 5 0 6 0 7 0 t (° C) I (A) 01 0 2 5 4 0 5 0 6 0 7 0 t (° C) I (A) 87,70 12,2 22,50 Ø 4,5 5,15 11,25 4,5 6,80 102,80 43,85 To order, specify : Part number Example: Solid state relay GMS range 22.5 mm - 84 130 100 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

To order, specify : 12,2 Ø 4,5 3,20 80,70 4,5 87,70 9 6,80 102,80 43,85 9,30 Part numbers Zero voltage switching Rating Output voltage Input voltage SCR 3 x 25 A 48-660 V a 90-280 Va c 84 130 311 4-32 Vc 84 130 310 Instantaneous switching Rating Output voltage Input voltage SCR 3 x 25 A 48-660 V a 4-32 Vc 84 130 312 Thermal dissipation curves GRD range - three-phase with SCR Curves for temperature-dependent derating GRD range 90 mm - 3 x 20 A I Three-phase I Complete, compact units I Tailor-made solution to current sinks I DIN rail and panel mounting I Rating: 3 x 25 A I Back-to-back SCRs I Protection by RC filter I Optional protection by removable varistor I LED display of input status I UL - cUL approval and CE marking Output specifications SCR Voltage range (Vrms max) 48-660 Peak voltage (t=1 min.) (Vpeak) 1200 Maximum current (A) 3 x 25 Maximum off-state leakage (mA) 20 per phase at Vmax and T = 25 °C Minimum current (mArms) 100 per phase Max. 1-cycle surge 500 T=25°C (A peak) Max. 1-second surge 145 T=25°C (A peak) On-state voltage drop 1.6 at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s 1260 Static (off-state) dv/dt (Vµs) 500 Supply frequency range (Hz) 47 to 80 cos ϕ (Zero voltage) > 0.5 Rth junction/ ambient air 1° C/W Input specifications Input voltage (V) 90-280 aa cc 4-32 cc Drop-out voltage 10 Vrms 1V c Maximum current 10 mArms 10 mA (at Vmax) Nominal input resistance (kΩ ) 45 3 Response time 20 ms 0.5 cycle max. (close) Response time 30 ms 0.5 cycle max. (open) For instantaneous switching models, turn-on time is less than 100 µs Characteristics Operating temperature (°C) -20 to +80 Storage temperature (°C) -40 to +100 Input to output insulation voltage (Vrms)4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 940 Dimensions Solid state relays with integrated heatsink, DIN rail mounting - GRD range 90 mm I(A) t (° C) 01 0 2 0 3 0 4 0 5 0 6 0 7 0 A1+ A2- U U U Part number Example: Solid state relay - GRD range 90 mm - 84 130 311 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

To order, specify : 87,70 12,2 Ø 4,5 3,20 35,70 4,5 6,80 102,80 43,85 9,30 Part numbers Zero voltage switching Rating Output voltage Input voltage SCR

35 A 48-660 V a 90-280 Va c 84 130 110

45 A 48-660 V a 90-280 Va c 84 130 115

Rating Output voltage Input voltage SCR

35 A 48-660 V a 4-32 Vc 84 130 112

45 A 48-660 V a 4-32 Vc 84 130 114

Thermal dissipation curves GRD range - single-phase with SCR Zero voltage switching Instantaneous switching Curves for temperature-dependent derating GRD range 45 mm - 35 A GRD range 45 mm - 45 A I Single phase I Complete, compact units I Tailor-made solution to current sinks I DIN rail and panel mounting I Rating: 35 and 45 A I Back-to-back SCRs I Protection by RC filter I Optional protection by removable varistor I LED display of input status I UL - cUL approval and CE marking Output specifications SCR Voltage range (Vrms max) 48-660 Peak voltage (t=1 min.) (Vpeak) 1000 (1) Maximum current (A) 35 45 Maximum off-state leakage 4 at Vmax and T = 25 °C (mArms) Minimum current (mArms) 100 Max. 1-cycle surge 750 T=25°C (A peak) Max. 1-second surge 145 T=25°C (A peak) On-state voltage drop 1.6 at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s 1260 5000 Static (off-state) dv/dt (Vµs) 500 Supply frequency range (Hz) 47 to 80 cos ϕ (Zero voltage) > 0.5 Rth junction /ambient air 3.78° C/W 1.65° C/W Input specifications Input voltage (V) 90-280 aa cc 4-32 cc Drop-out voltage 10 Vrms 1V c Maximum current 10 mArms 12 mA (at Vmax) Nominal input resistance 45 3 Response time 20 ms 0.5 cycle max. (close) Response time 30 ms 0.5 cycle max. (open) For instantaneous switching models, turn-on time is less than 100 µs Characteristics Operating temperature (° C) -20 to +80 Storage temperature (° C) -40 to +100 Input to output insulation voltage (Vrms)4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 490 Input terminal Ø 2 mm max. capacity Output terminal Ø 5.6 mm max. capacity (1) Peak voltage 1200V, relay protected to 1100V ± 10% Dimensions Solid state relays with integrated heatsink, DIN rail mounting - GRD range 45 mm 0 1 0 2 5 4 05 06 07 0 t (° C) I (A) U U 0 1 02 54 0 5 0 6 0 7 0 t (° C) I (A) Part number Example: Solid state relay - GRD range 45 mm - 84 130 110 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

To order, specify: 12,2 Ø 4,5 3,20 80,70 4,5 87,70 9 6,80 102,80 43,85 9,30 I Two-phase I Complete, compact units I Tailor-made solution to current sinks I DIN rail and panel mounting I Rating: 2 x 25 A I Back-to-back SCRs I Protection by RC filter I Optional protection by removable varistor I LED display of input status I UL - cUL approval and CE marking Output specifications SCR Voltage range (Vrms max) 48-660 Peak voltage (t=1 min.) (Vpeak) 1200 Maximum current (A) 3 x 25 Maximum off-state leakage (mA) 20 per phase at Vmax and T = 25 °C Minimum current (mArms) 100 per phase Max. 1-cycle surge 500 T=25°C (A peak) Max. 1-second surge 135 T=25°C (A peak) On-state voltage drop 1.6 at Imax and T=25°C (Vpeak) I2t (t=10ms) A2s 1260 Static (off-state) dv/dt (Vµs) 500 Supply frequency range (Hz) 47 to 80 cosϕ (Zero voltage) > 0.5 Rth junction/ambient air 1° C/W Input specifications Input voltage (V) 90-280 aa cc 4-32 cc Drop-out voltage 10 Vrms 1V c Maximum current 10 mArms 10 mA (at Vmax) Nominal input resistance (kΩ ) 45 3 Response time 20 ms 0.5 cycle max. (close) Response time 30 ms 0.5 cycle max. (open) For instantaneous switching models, turn-on time is less than 100 µs Characteristics Operating temperature (°C) -20 to +80 Storage temperature (°C) -40 to +100 Input to output insulation voltage (Vrms)4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 940 Solid state relays with integrated heatsink, DIN rail mounting - GRD range 90 mm I(A) t (° C) 01 0 2 0 3 0 4 0 5 0 6 0 7 0 1Part numbers Zero voltage switching Rating Output voltage Input voltage SCR 2 x 35 A 48-660 V a 90-280 Va c 84 130 322 4-32 Vc 84 130 320 Instantaneous switching Rating Output voltage Input voltage SCR 2 x 35 A 48-660 V a 4-32 Vc 84 130 321 Curves for temperature-dependent derating GRD range 90 mm - 2 x 25 A Dimensions Standard products Part number Example: Solid state relay - GRD range - 84 130 222 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

I Currents from 10 to 125 A I Output voltage from 24 to 660 VAC I Optimum thermal response I Regulated AC and DC control input I Control status LED I Available with or without protective cover GN single phase solid state relays To order, specify : Part number Example: Single phase solid state relay - 84 137 120 Standard products Standard products, non stocked Current Output voltage Input voltage Zero voltage switching Instantaneous switching with cover without cover with cover without cover 10A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 10A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 25A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 25A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 50A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 50A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 75A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 75A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 100A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 100A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 125A 24-280VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 125A 48-660VAC 4-32VDC 18-36VAC/DC 90-280VAC/DC 84 137 000 84 137 002 84 137 001 84 137 100 84 137 102 84 137 101 84 137 010 84 137 012 84 137 011 84 137 110 84 137 112 84 137 111 84 137 020 84 137 022 84 137 021 84 137 120 84 137 122 84 137 121 84 137 030 84 137 032 84 137 031 84 137 130 84 137 132 84 137 131 84 137 040 84 137 042 84 137 041 84 137 140 84 137 142 84 137 141 84 137 080 84 137 082 84 137 081 84 137 180 84 137 182 84 137 181 84 134 000 84 134 002 84 134 001 84 134 100 84 134 102 84 134 101 84 134 010 84 134 012 84 134 011 84 134 110 84 134 112 84 134 111 84 134 020 84 134 022 84 134 021 84 134 120 84 134 122 84 134 121 84 134 030 84 134 032 84 134 031 84 134 130 84 134 132 84 134 131 84 134 040 84 134 042 84 134 041 84 134 140 84 134 142 84 134 141 84 134 080 84 134 082 84 134 081 84 134 180 84 134 182 84 134 181 84 137 200 84 137 202 84 137 201 84 137 300 84 137 302 84 137 301 84 137 210 84 137 212 84 137 211 84 137 310 84 137 312 84 137 311 84 137 220 84 137 222 84 137 221 84 137 320 84 137 322 84 137 321 84 137 230 84 137 232 84 137 231 84 137 330 84 137 332 84 137 331 84 137 240 84 137 242 84 137 241 84 137 340 84 137 342 84 137 341 84 137 280 84 137 282 84 137 281 84 137 380 84 137 382 84 137 381 84 134 200 84 134 202 84 134 201 84 134 300 84 134 302 84 134 301 84 134 210 84 134 212 84 134 211 84 134 310 84 134 312 84 134 311 84 134 220 84 134 222 84 134 221 84 134 320 84 134 322 84 134 321 84 134 230 84 134 232 84 134 231 84 134 330 84 134 332 84 134 331 84 134 240 84 134 242 84 134 241 84 134 340 84 134 342 84 134 341 84 134 280 84 134 282 84 134 281 84 134 380 84 134 382 84 134 381 Characteristics Operating temperature (C°) – 20 to + 80 Storage temperature (C°) – 40 to + 100 I/O insulation voltage (Vrms) 4000 Breakdown voltage ( Vrms) 2500 Input/output capacitance ( pF) 8 Frequency ( Hz) 47 to 80 Material Casing polycarbonate UL-94V Material Baseplate Zamak Weight Ip 20 114 g Weight Ip 00 97 g 3/A1+ 4528 60,2 44,2 47,6 1/L1 2/T1 4/-A2 30,6 ø4,9 Dimensions Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

4-32 VDC 18-36 VAC/DC 90-280VAC/DC Drop-out voltage 1V 1V 10V Max. regulated current (mA) 14 20 8.5 Turn-on time (ms) (zero voltage relay) 8.33 (60Hz) - 10 (50Hz) 20 20 Turn-on time (ms) (instantaneous relay) 0.1 0.1 0.1 Turn-off time (ms) 8.33 (60Hz) - 10 (50Hz) 30 30 Output specifications 24-280 VAC 48-660 VAC Peak voltage not rep. (Vp) 600 1200 Off-state leakage (@ Vmax and T=25°C) 2.5 - 4.25 2.75 - 4.75 Max. current (A) 10 25 50 75 100 125 Minimum current (mA) 100 100 100 100 100 100 Max. non-rep. 1 s surge (T=25°C) (A) 80 150 235 300 360 510 Max. non-rep. 1-cycle surge (T=25°C) (A) 300 500 780 1000 1200 1700 |2t (50Hz-60Hz) (A2S) 375-450 1041-1250 2535-3042 4166-5000 6000-7000 12041-14450 Static dV/dt (V/µs) 500 500 500 500 500 500 GN. 10 AMP SSR (1200 & 600 V) 10,0 8,0 6,0 4,0 2,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 3,0°C/W 7,0°C/W5,0°C/W GN. 25 AMP SSR (1200 & 600 V) 25,0 20,0 15,0 10,0 5,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 1,0°C/W 1,7°C/W1,5°C/W 3,0°CW2,0°CW GN. 50 AMP SSR (1200 & 600 V) 50,0 40,0 30,0 20,0 10,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 0,5°C/W 1,0°C/W0,7°C/W 2,0°C/W1,5°C/W GN. 75 AMP SSR (1200 & 600 V) 75,0 50,0 25,0 0,0 20 25 30 35 40 45 50 55 60 65 70 75 80 0,4°C/W 0,7°C/W0,5°C/W 1,5°C/W1°C/W GN. 100 AMP SSR (1200 & 600 V) 100,0 90,0 80,0 70,0 0,0 10,0 20,0 30,0 40,0 50,0 60,0 10 20 30 40 50 60 70 800 0,25°C/W 0,5°C/W0,4°C/W 1,0°C/W0,7°C/W GN. 125 AMP SSR (1200 & 600 V) 125,0 100,0 75,0 0,0 25,0 50,0 10 20 30 40 50 60 70 800 0,25°C/W 0,5°C/W0,4°C/W 1,0°C/W0,7°C/W Load current ( A ) Ambient temperature (°C) HEATSINK Load current ( A ) Ambient temperature (°C) HEATSINK Load current ( A ) Ambient temperature (°C) HEATSINK Load current ( A ) Ambient temperature (°C) HEATSINK Load current ( A ) Ambient temperature (°C) HEATSINK Load current ( A ) Ambient temperature (°C) HEATSINK Thermal curves Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Standard products, non stocked I Intended for resistive loads I Current ratings 10 and 25 A I Output voltage 24 to 280 V aa I "Zero voltage" switching I Optimum thermal response I Control input 3-32 V cc, 18 to 36 V aa, 90 to 280V aa I Connection via screws or faston connectors I UL/cUL, TUV approval and CE marking GN Triac low-cost single-phase solid state relays : GNA5 range To order, specify: Part number Example : GN Triac low-cost single-phase solid state relay - 84 134 900 Part numbers Rating Output Input Screw Faston voltage voltage

10 A 24-280 V a 3-32 Vc 84 134 900 84 134 907

18-36 Va c 84 134 902 84 134 908 90-280 Va c 84 134 901 84 134 909

25 A 24-280 V a 3-32 Vc 84 134 910 84 134 917

18-36 Va c 84 134 912 84 134 918 90-280 Va c 84 134 911 84 134 919 Thermal dissipation curves 10 A 25 A Output specifications Range 24-280 V aa Non-rep. peak voltage (Vp) 500 Maximum off-state leakage 4.75 (at Vmax and T = 25° C) (mA) Peak voltage (Arms) 10 25 Minimum current (mArms) 100 100 Max. non-rep. surge for 1 s 30 75 (T = 25° C (A)) Max. non-rep. surge for 100 250 1 cycle (T = 25° C (A)) I 2t (50 Hz-60Hz) (A2s) 50 - 41 288 - 240 Voltage drop at Imax 1.65 1.85 T = 25° C (V) Static dV/dt (V/µs) 200 200 Rth junction/casing (°C/W) 3 2 Input specifications 4-32 V cc 18-36 V a c 90-280 V a c Drop-out voltage (V) 1 2 10 Max. current (mA) 14 8 8.5 Turn-on time 8.33 (60Hz) 20 20 (ms) 10 (50Hz) Turn-off time 8.33 (60Hz) 30 30 (ms) 10 (50Hz) Characteristics Operating temperature (°C) -20 to +80 Storage temperature (°C) -40 to +100 I/O insulation voltage (Vrms) 4000 Breakdown voltage (Vrms) 2500 Input/output capacitance (pF) 8 Frequency (Hz) 47 to 63 Material Casing UL 94 V Baseplate Zamak Weight (g) 97 Dimensions 3/A1+ 44,4 (1.750) 57,1 (2.250) 25,4 (1.0) 2/T11/L1 4/-A2 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 2.0 4.0 1.0˚ C/W 1.5˚ C/W 2.0˚ C/W 3.0˚ C/W 5.0˚ C /W6.0 8.0 10.0 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 5.0 10.0 5.0˚ C/W 3.0˚ C/W 2.0˚ C 1.5˚ C/W 1.0˚ C/W 20.0 15.0 25.0 Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

You are in : Control Automation / Solid state relays / Single-phase GN / GND / FET VERSION / 84 137 870 84 137 870 Specifications Products in the same range Selling points of the range :

• FET transistor versions 10, 15 and 30 A
• Bipolar transistor version 10 A
• Control voltage : 3 to 32 V
• Optimum thermal response
• Available with or without protective cover
• UL/Cul, TUV approval and CE marking Specifications Current 30 A Output voltage 1 - 50 V DC input voltage 3 - 32 V DC Protective cover with protective cover Turn-off voltage (V) 1 Thermal resistance Junction to casing (oC/W) FET 10 A - 15 A : 2,25 FET 30 A : 2,45 Inputs specifications Output characteristics Max. controled current 20 mA Response time (close) (µs) 2 Response time on closing (µs) 50 Max. non-rep. 10 µ(T=25°C) (A) FET 10 A : 60 FET 15 A : 120 FET 30 A : 160 Minimum current (mA) 1 Products in the same range Bipolar version Current Output voltage input voltage Protective cover Part number

10 A 3 - 60 V DC 3 - 32 V DC without protective cover 84 134 750

10 A 3 - 60 V DC 3 - 32 V DC with protective cover 84 137 750

Current Output voltage input voltage Protective cover Part number

10 A 1 - 200 V DC 3 - 32 V DC without protective cover 84 134 850

15 A 1 - 100 V DC 3 - 32 V DC without protective cover 84 134 860

30 A 1 - 50 V DC 3 - 32 V DC without protective cover 84 134 870

10 A 1 - 200 V DC 3 - 32 V DC with protective cover 84 137 850

15 A 1 - 100 V DC 3 - 32 V DC with protective cover 84 137 860

30 A 1 - 50 V DC 3 - 32 V DC with protective cover 84 137 870

Crouzet - The online catalogue http://www.crouzet.com/OLC/item.cfm?item_id=164202000000315402000001926402 (1 of 2) [8/9/2001 2:24:22 PM] Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

5,3 12,1 92 6,35 73,5 47,6 7,62 22,6 18,5 L1 U L2 V A1F A2 A1R 3 M3.5 screws I Reverses rotation of three-phase motors I Output voltage 24-480 V~ I Input voltage 3-32 Vcc I Input to output insulation voltage: 100ms I Interlock against simultaneous actuation in both directions I Back-to-back SCRs I Input to output insulation voltage: 5000 Vaa I Protected by RC filter and overvoltage limiter I Direction of rotation displayed by 2 green LEDs To order, specify: Thermal dissipation curves Output specifications Voltage range (Vrms) 24-480 Peak voltage (V peak) 1000 Maximum current (Arms) 25 Minimum current (mArms) 200 Max. 1-cycle surge (A peak) 270 Maximum off-state leakage (mArms) 10 I 2T (t=10ms) 365 On-state voltage drop 1.6 Vrms at Imax and T=25°C Thermal resistance/Junction to casing (o C/W) 0.2 Static (off-state) dv/dt (V/µs) 500 Supply frequency range (Hz) 47 to 63 Response time (ms) 0.2 Maximum turn-off time (ms) 20 Reversing time (ms) 100 Input specifications Input voltage (V) 3-32cc Drop-out voltage (Vc)1 Max. input current (mA) 20 (input regulated current and limited) Nominal resistance (+/- 10% at 25°C) (kΩ )1 Characteristics Operating temperature (°C) -20 to +80 Storage temperature (°C) -40 to +100 Input to output insulation voltage 5000 V a Breakdown voltage 4000 V a Input/output capacitance (pF) 8 Material Casing Self-extinguishing Baseplate Aluminium Weight (g) 455 Solid state three-phase motor reversing relay - GA0 range Equivalent circuits Dimensions (General tolerances +/- 0.5) Connection A1F + A1R + A2 - ~ L1 ~ U ~ L2 ~ V 001744G3 51 0 1 5 2 0 1 0 25 20 30 40 50 60 70 80 100 110 120 0,5° C / W1° C / W 2° C / W 3° C / W No heatsink GA0 range - 25A On-state current (A) Dissipated power (W) Ambient temperature (°C) Baseplate temperature U V UV W M L L L Output Input Front Rear Standard products Part number Accessory Example: Solid state three-phase motor reversing relay - GA0 range - 84 067 441 - Protective cover - 26 532 797 Part number 84 067 441 Accessories Protective cover (see page 4/31) 26 532 797 Heatsink (see page 4/30) Heat transfer compound (see page 4/32) 18 373 112 DIN rail adaptor (see page 4/31) 26 532 764 Quick-blow fuses (see page 4/32) Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

I For controlling three-phase loads I Rating 10, 25, 45 A I Output voltages to 660 Vrms I Control voltage 4-32 V cc or 90-280 V aa I Peak voltage: 1200 V I Back-to-back SCR output I Input to output insulation voltage: 4000 Vrms I Protected against overvoltages by RC filter and overvoltage limiter I Zero voltage or instantaneous switching Output specifications Voltage range (Vrms) 24-660 Peak voltage (V peak) 1200 Maximum current (Arms) 10 25 45 Minimum current (mArms) 200 200 200 Max. 1-cycle surge 160 270 450 (A peak) Leakage current (mArms) 10 10 10 I2t (t=10ms) 128 365 1000 On-state voltage drop 1.6 at Imax and T =25°C (Vmax) Thermal resistance/Junction to casing (o C/W)0.25 ° C/W 0.25 ° C/W 0.2 ° C/W Supply frequency range (Hz) 47 to 63 Static (off-state) dv/dt 500 Vµs Response time 3-32 V c 11 ms 90-280 V a 20 ms Maximum turn-off time 3-32 V c 11 ms 90-280 V a 30 ms (For instantaneous 3-32 V c switching models, turn-on time is less than 100 µs and turn-off time less than 1/2 cycle.) Input specifications Input voltage (V) 90-280 aa 4-32 cc Max. input current (mA) 10 20 (input current limited) Drop-out voltage (V) 10 a 1 c Nominal input 1 resistance (kΩ ) Characteristics Operating temperature (°C) -20 to +80 Storage temperature (°C) -40 to +100 Input to output insulation voltage (Vrms) 4000 Breakdown voltage (T=25°C, 1s) (Vrms) 4000 Input/output capacitance (pF) < 8 Insulation resistance (MΩ ) 104 Material Casing Self-extinguishing (UL 94 V0) Baseplate Aluminium Weight (g) 450 Solid state three-phase relays - GA3 range Equivalent circuits A1+ A2- Input Output Part numbers Rating Switching mode Input voltage

10 A Zero voltage 4-32 V c 84 068 251

Instantaneous 4-32 V c 84 028 251

25 A Zero voltage 90-280 V a 84 068 453

Instantaneous 90-280 V a 84 028 453 4-32 V c 84 068 651

45 A Zero voltage 90-280 V a 84 068 653

Instantaneous 90-280 V a 84 028 653 4-32 V c 84 028 651 Accessories Protective cover (see page 4/31) 26 532 796 Heatsinks (see page 4/30) Heat transfer compound (see page 4/32) 18 373 112 DIN rail adaptor (see page 4/31) 26 532 764 Quick-blow fuses (see page 4/32) Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

To order, specify: 0 2 4 6 8 1 0 2 03 0 4 0 5 06 07 08 0 1°C / W 2°C / W 100 0 5 10 15 20 25 30 40 50 60 70 8020 0,5°C / W 1°C / W 2°C / W 0 1 02 0 3 04 0 3 0 4 0 5 06 0 7 08 020 125 100 0,25 °C / W 0,5°C / W 0,8°C / W 1°C / W 150 Thermal dissipation curves Dimensions GA3 range - 10A No heatsink On-state current (A) Dissipated power (W) Dissipated power (W) Dissipated power (W) Ambient temperature (°C) On-state current (A) Ambient temperature (°C) On-state current (A) Ambient temperature (°C) GA3 range - 25A GA3 range - 45A 104 73,5 47,6 Ø 5,1 A1+ -A2 3 4 5 6 ± 0,1 ± 0,2 2 M3.5 screws

6 M4 screws

Example: Solid state three-phase relay - GA3 range - 84 068 451 - Protective cover - 26 532 796 Baseplate temperatureBaseplate temperature (°C) Baseplate temperature Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Rating Range Output voltage Input voltage

4 A GA 1 24-280 V a 3-32 Vc 84 064 131

GA 8 24-280 V a 3-32 Vc 84 065 131

5 A GA 8 24-280 V a 3-32 Vc 84 065 030

3 A GA 8 24-480 V a 3-32 Vc 84 065 040

Rating Range Output voltage Input voltage

5 A GA 8 24-280 V a 3-32 Vc 84 025 030

3 A GA 8 24-480 V a 3-32 Vc 84 025 040

Quick-blow fuses (see page 4/32) Equivalent circuits Curves for temperature-dependent derating Matching and trigger circuit (Zero voltage) 0 20 30 40 50 60 70 80 I 20 40 60 80 °C Ambient temperature (°C) Rating (Vpeak) I PCB-mountable (flat pack = GA1, SIP = GA8) I Rating: 4 A-5 A I Peak voltage: 600 V I Will withstand a 1-cycle 100 A surge I TRIAC outputs I UL - cUL 3 A approval and CE marking I Zero voltage or instantaneous switching (5A only) I Input to output insulation voltage: 4000 V I Protection by RC filter To order, specify: Output specifications Voltage range (Vrms) 24-280 24-280 Peak voltage (Vpeak) 600 850 Maximum current (Vpeak) 4 or 5 depending3 on part no. Minimum current (Vpeak) 0.05 0.05 Max. 1-cycle surge (Apeak) 100 100 Maximum off-state leakage (mArms) 6 6 On-state voltage drop at 1.6 1.65 Imax and T =25°C (V peak) Static (off-state) dv/dt (Vµs) 200 200 Maximum response time 0.5 cycle 0.5 cycle (close) Supply frequency range 47 to 63 47 to 63 Input specifications Input voltage (V) 3-32 cc Drop-out voltage (V c)1 Maximum current at Vmax (mA) 25 Nominal input resistance (kΩ ) regulated Characteristics Operating temperature (°C) -30 to +80 Storage temperature (°C) -40 to +100 Input to output insulation voltage (Vrms) 4000 Input/output capacitance (pF) 8 Weight (g) 15 Solid state relays - GA1 and GA8 range Dimensions (General tolerances +/- 0.5) GA 1 GA 8 3,8 27,9 3,8 38,2 7,6 1,020,3 30,5 35,6 6,4 9,5 3+4 Ø 001738G2 5,9 0,89 25,4 43,2 10,2 2,5 7,6 17,8 30,5 35,5 Ø 1,1 43 2 1 001739G2 Part number Accessory Example: Solid state relay - GA8 range - 84 065 131 - Fuse Z 084 363 GA1 GA8 Standard products Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

87,70 12,2 Ø 4,5 3,20 35,70 4,5 6,80 102,80 43,85 9,30 Part number Rating Output voltage Input voltage

35 A 48-530 V a 4-32 V

Output specifications (up to 25 °C) Voltage range (max. Vrms) Peak voltage - t = 1 min (V) Max. current (A) Off-state leakage at V max. and 25 °C (mA) Max. current surge 1 cycle (Apeak) 1 sec (Apeak) On-state voltage drop at I max (Vpeak) I 2t - t = 10 ms (A2s) Static dv/dt (V/µs) Supply frequency range (Hz) Thermal resistance Junction / ambient air Control input specifications Input voltage (V) Drop-out voltage Max. input current (mA) Response time on opening (max. period) on closing DC power supply / Alarm output Supply voltage (in relation to the relay - terminal) Current Voltage : alarm output Current : alarm output Voltage : overheat output Current : overheat output Characteristics Temperature Operation limits Stored Input to output insulation voltage Breakdown voltage Input/output capacitance Curves for temperature-dependent derating 84 130 511 48-660 1000 750 145 1.6 1260 500 47 to 63 3.78 ° / W 4 to 32 c 1 V 0.5 0.5 4 to 32 V c 15 to 45 mA 4 to 32 V c 60 mA 4 to 32 V c 60 mA -20 to 80 °C -40 to 100 °C

4000 Vrms

2500 Vrms

I Patented operating principle (96 050 16) I 35 A single-phase solid state relay - ready for use I Zero voltage switching I Provides visual indication and electrical signal if a fault occurs in the circuit or on the relay I LED display of - input status - relay status - relay overheating I 2 alarm outputs : 4-32 VDC push-pull transistor Operating principle SMART SSR is a solid state relay which monitors its own correct operation in addition to that of the load being controlled. SMART SSR provides information about the state of the relay and the load via 3 LED indicators and 2 alarm outputs. Operation SMART SSR powers itself between the relay control input -ve terminal and the 4-32 V c terminal. When no faults are present and the relay is not being controlled, the alarm outputs are at 4-32 V c and the LEDs are off. When no faults are present and the relay is being controlled, the green LED lights up and the alarm outputs stay at 4-32 V c. If the mains voltage disappears or if the relay output is short-circuited, the alarm output changes to 0 V c and the red LED flashes. If the relay output is faulty, the alarm output changes to 0 V c and the red LED is on. If the relay overheats, the “overheat” output changes to 0 V c and the yellow LED is on. The overheat output is tripped when the internal temperature exceeds 125 °C. The relay returns to normal state when the internal temperature drops to below 120 °C. Operating diagram Dimensions To order, specify : Standard products Part number Example : SMART SSR 84 130 511 SMART SSR power supply SSR input Green LED Mains presence Load : closed circuit SSR : external short-circuit on output terminals SSR : output failed (internal short-circuit) Alarm output Alarm LED Overheating Overheat output Yellow LED 0 1 0 2 5 4 05 06 07 0 t (° C) I (A) Connection Load Mains (48-530 V a) Overheat output (0-V c) Error output (0-V c) Power supply V c (4-32 V c) Error indicator Overheating indicator Note : the input, outputs and power supply are connected to the same common ground. Input indicator Input (“ON ” from 4 to 32 V c) Ground (see note) SMART SSR : “Self-checking” solid state relay Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

(1) The SSR input, the SMART MODULE alarm output and the SMART MODULE + power supply all share the same - terminal. Part number SMART MODULE

Electrical characteristics

Maximum voltage in stopped state (Maximum authorised voltage on relay input terminals before the SMART MODULE registers control is present). Line voltage Line voltage Peak voltage (1 min. max.) Leakage current (at maximum line voltage) DC power supply / Alarm output Power supply voltage (in relation to relay terminal 4) Current Voltage : alarm output Current : alarm output General characteristics Temperature operating limits storage Input / output insulation voltage (limited to 1 mA for 1 sec. - Ta = 25 °C) Connections 84 060 001 5 to 24 V c

32 V c

1200 Vpeak

• 20 °C to + 80 °C - 40 °C to +100 °C

SMART MODULE : control module for "hockey puck" type solid state relays I Patented operating principle (96 050 16). I Provides both visual and electrical information if a fault occurs in the circuit or on the solid state relay being controlled. I For mounting on single-phase "hockey puck" type solid state relays. I Peak voltage 1200 V aa : suitable for solid state relays with DC input and A aa output. I Alarm output : 4-32 V cc push-pull transistor I Optical isolation 4000 V aa. I Conforms with EC low-voltage directive. Dimensions Operating principle The SMART MODULE can be mounted on any single-phase solid state relay with DC input / AC output in a "hockey puck" casing. The SMART MODULE has a constant power supply to ensure that both the relay and the load being controlled are functioning correctly. The SMART MODULE provides information on the relay status by means of an LED display and an alarm output. Operation Power is supplied to the SMART MODULE between its 4-32 V c terminal (+) and the - terminal of the solid state relay control input. During correct operation when the relay is not being controlled, the alarm output is at 4-32 V c and the LEDs are off. During correct operation when the relay is being controlled, the green LED is on and the alarm remains at 4-32 V c. If mains voltage is lost or there is a short-circuit on the relay output, the alarm output changes to 0 V c and the red LED flashes. If the relay output is faulty, the alarm output changes to 0 V c and the red LED comes on. To order, specify : Standard products Part number Example : SMART MODULE 84 060 001 SMART MODULE supply SSR input Green LED Mains present Load : circuit closed SSR : external short-circuit on output terminals SSR : output failed (internal short-circuit) Alarm LED Alarm output 27,9 25,4 43,2 Mains 48-660 V a Solid state relay Alarm output (4-32 V c) (1) Auxiliary power supply (4-32 V c) (1) Red LED : Alarm Green LED : Input SSR input (3-32 V c) (1) Common Load SMART MODULE Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

16,0 14,0 12,0 10,0 8,0 6,0 18,0 20,0 -20 -10 100 2 03 04 05 06 07 08 0 2,0°C/W 1,5°C/W 1,0°C/W 0,7°C/W 0,5°C/W To order, specify: Ambient temperature (°C)

20 A version

0,76 4,06 13,97 12,7 6,35 38,1 25,4 25,4 25,4 2xØ 5,05 15,24 10,4 6,35 66,8 57,15 46,23 5,08 Output specifications(at 25 °C) Voltage range (Vrms max.) Peak voltage - t = min (V) Off-state leakage at Vmax and 25 °C Standard - with RC circuit (mA) Low off-state leakage - no RC circuit (mA) Static dv/dt Standard - with RC circuit (V/µs) Low off-state leakage - no RC circuit (V/µs) Peak voltage (A) Minimum current (mArms) Max. 1-cycle surge (Apeak) Max. 1-second surge (Apeak) On-state voltage drop at Imax (Vpeak) I 2t (t = 10 ms) (50 Hz 1/2 wave) (A2S) I2t (t = 8.33 ms) (60 Hz 1/2 wave) (A2S) Supply frequency range (Hz) Rth junction / casing (°K/W) Control input characteristics Input voltage (V) Drop-out voltage (V) Maximum current (mA) 36-530 V a version Zero voltage On-delay response time Zero voltage Instantaneous (ms) Off-delay response time Characteristics Temperature Use limits Stored Input to output insulation voltage (Vrms) Breakdown voltage (Vrms) Input/output capacitance (pF) Dimensions 24-280 36-530 600 800 4.2 5.3 0.1 0.1 500 500 250 250 12 20 100 100 120 200 36 60 1.65 1.55 55 55 50 50 47 to 63 3 2.2 4 to 15 c 32 ma@ 15 V c 63 ma@ 15 V c 0.5 cycle max. 0.1 0.5 cycle max. -20 to 80 °C -40 to 100 °C 4000 2500 Part numbers Rating Output Switching RC voltage circuit

12 A 24 - 280 Va zero voltage No 84 132 000

12 A 24 - 280 Va zero voltage Yes 84 132 200

12 A 24 - 280 Va instantaneous No 84 132 100

12 A 24 - 280 Va instantaneous Yes 84 132 300

12 A 36 - 530 Va zero voltage No 84 132 400

12 A 36 - 530 Va zero voltage Yes 84 132 600

12 A 36 - 530 Va instantaneous No 84 132 500

12 A 36 - 530 Va instantaneous Yes 84 132 700

20 A 24 - 280 Va zero voltage No 84 132 010

20 A 24 - 280 Va zero voltage Yes 84 132 210

20 A 24 - 280 Va instantaneous No 84 132 110

20 A 24 - 280 Va instantaneous Yes 84 132 310

20 A 36 - 530 Va zero voltage No 84 132 410

20 A 36 - 530 Va zero voltage Yes 84 132 610

20 A 36 - 530 Va instantaneous No 84 132 510

20 A 36 - 530 Va instantaneous Yes 84 132 710

Curves for temperature-dependent derating Extra-slim solid state relay - GZ range I Low-cost solid state relay - Triac output I Extra-slim casing I Output current 12 and 20 A I Output voltages 24-280 V aa and 36-530 V aa I Control input 4-15 V cc I Version with low off-state leakage (no RC circuit) I Optical isolation 4 KV I UL - cUL approval and CE marking Part number Example: Extra-slim solid state relay - GZ range - 84 132 000 Standard products Standard products, non stocked 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0 20 30 40 50 60 70 2,0°C/W 1,5°C/W 1,0°C/W 0,7°C/W 0,5°C/W Ambient temperature (°C)

12 A versionCurrent (Arms)Current (Arms)

Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com

Relay Heatsink Adaptor Protective Unit part cover number Type GA0-25 A 84 067 441 26 532 762 26 532 764 26 532 797 84 067 449 Type GA3-25 A 84 028 451 26 532 762 26 532 764 26 532 796 84 028 459 Type GA3-25 A 84 068 451 26 532 762 26 532 764 26 532 796 84 068 459 Type GA3-25 A 84 068 453 26 532 762 26 532 764 26 532 796 84 068 409 Type GA3-45 A 84 068 651 26 532 762 26 532 764 26 532 796 84 068 659 Temperatures (° C) Unit part 20 30 40 50 60 70 number 21 19 17 15 14 11 84 067 449 24 22 19 17 15 12 84 028 459 24 22 19 17 15 12 84 068 459 24 22 19 17 15 12 84 068 409 24 22 19 17 15 12 84 068 659 Relay-heatsink assembly for DIN rail mounting To order, specify: Standard products Current (A) Part number Example: Relay-heatsink assembly for DIN rail mounting 84 060 239 Standard products, non stocked Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com