82A0132 TEC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER, SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Page 1 of 1 Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2013 Tyco Electronics Corporation. All rights reserved. COMPONENT WIRES - 82A0112 NOTE: Nominal values are for information only. Nominal values are not requirements. SPECIFICATION CONTROL DRAWING 82A0132 THREE CONDUCTOR CABLE, UNSHIELDED, UNJACKETED, GENERAL PURPOSE, FLEXIBLE, 600 VOLT 1-7-13 B This specification sheet forms a part of the latest issue of Raychem Specification 80. TITLE Date Revision CABLE CONSTRUCTION DETAILS PART NUMBER CONDUCTOR SIZE (AWG) OUTSIDE DIAMETER (inches) MAXIMUM WEIGHT (lb/1000 ft.)NOMINAL MAXIMUM 82A0132-26-* 26 .071 .078 4.3 82A0132-24-* 24 .080 .086 6.4 82A0132-22-* 22 .093 .099 8.9 82A0132-20-* 20 .114 .123 12.9 82A0132-18-* 18 .138 .147 20.5 82A0132-16-* 16 .171 .179 31.2 TEMPERATURE RATING: 150°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz PART NUMBER: The "*" in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors. Colors shown do not necessarily reflect the sequence of manufacturing. 1/ Example: AWG 22, black, brown and red component wires: 82A0132-22-0/1/2 CABLE RATINGS AND ADDITIONAL REQUIREMENTS