8229210 FESTO

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

VUVX-BK10-T32CV-A1ZH-F-1T1L Part number: 8229210 General operating condition Data sheet Feature Value Valve function 2x3/2, closed, monostable Actuation type Electrical Valve size 10 mm Nominal flow rate standardized according to ISO 8778 600 l/min Operating voltage 24V DC Operating pressure 0 MPa ... 0.7 MPa Operating pressure 0 bar ... 7 bar Structural design Piston slide with sealing ring Reset method Mechanical spring Degree of protection IP65 Width 10.35 mm Nominal width 3.8 mm Exhaust air function With flow control option Sealing principle Soft Mounting position Any Manual override Non-detenting Type of control Pilot-controlled Pilot air supply port External Flow direction Reversible Symbol 00997510 Lap Underlap Signal status display yes Pilot pressure 2 bar ... 7 bar Suitability for vacuum no b-value 0.34 C value 2.3 l/sbar Nominal flow rate standardized according to ISO 8778 exhaust 2-3 650 l/min Max. switching frequency 3 Hz Switching time off 17 ms On switching time 14 ms Duty cycle 100% Max. positive test pulse with 0 signal 1400 µs Max. negative test pulse on 1 signal 800 µs Coil characteristics 24 V DC: 0.35 W Permissible voltage fluctuations +/- 10 % 1/19/26 - Subject to change - Festo SE & Co. KG 1/2

Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas Information on operating and pilot media Ester oil < 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2] Operation with oil lubrication possible (required for further use) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 1 - Low corrosion stress LABS (PWIS) conformity VDMA24364 zone III Storage temperature -20 °C ... 70 °C For use in the food industry NSF H1 Temperature of medium -5 °C ... 50 °C Relative air humidity 5 - 95 % Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas Ambient temperature -5 °C ... 50 °C Max. tightening torque for valve mounting 0.345 Nm Product weight 52.6 g Electrical connection Plug-in Type of mounting On sub-base Pilot air port 12/14 Sub-base Pilot exhaust air port 82/84 Sub-base Pneumatic connection 1 Sub-base Pneumatic connection 2 Sub-base Pneumatic connection 3 Sub-base Pneumatic connection 4 Sub-base Pneumatic connection 5 Sub-base Note on materials RoHS-compliant Seals material HNBR Material of dynamic seals HNBR Housing material Wrought aluminum alloy, anodized Material of spring High-alloy stainless steel Piston slide material POM Material of screws Stainless steel 1/19/26 - Subject to change - Festo SE & Co. KG 2/2