8218182 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Guided drive DGRC-GF-12-10-PA

Part number: 8218182

PDF page 1 diagram
PDF page 1 diagram

General operating condition

Data sheet

Feature Value
Distance of centre of gravity of payload to yoke plate xs 50 mm
Stroke 10 mm
Piston diameter 12 mm
Drive unit operating mode Yoke
Cushioning Elastic cushioning rings/pads at both ends
Mounting position Any
Guide Sliding guide
Structural design Guide
Position sensing For proximity sensor
Symbol 00991737
Protection against torsion/guide Guide rod with yoke
Operating pressure 0.2 MPa ... 1 MPa
Operating pressure 2 bar ... 10 bar
Max. speed 0.8 m/s
Mode of operation Double-acting
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC) 0 - No corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Suitability for the production of Li-ion batteries Suitable for battery production with reduced Cu/Zn/Ni values (F1a)
Ambient temperature -10 °C ... 60 °C
Impact energy in the end positions 0.07 J
Max. force Fy 187 N
Max. force Fy static 187 N
Max. force Fz 187 N
Max. force Fz static 187 N
Max. torque Mx 3.55 Nm
Max. static moment Mx 3.55 Nm
Max. torque My 2.2 Nm
Max. static moment My 2.2 Nm
Max. torque Mz 2.2 Nm
Max. static moment Mz 2.2 Nm
Max. permissible torque load Mx as a function of the stroke 0.91 Nm
Max. payload as a function of the stroke at defined distance xs 22.8 N
Theoretical force at 6 bar, retracting 51 N
Theoretical force at 6 bar, advancing 68 N

12/21/25 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Torsional backlash 0.065 deg
Moving mass 85.2 g
Product weight 173.8 g
Basic weight with 0 mm stroke 88.6 g
Center of gravity of the moving mass as a function of the stroke 18.5 mm
Pneumatic connection M5
Note on materials RoHS-compliant
Cover material Wrought aluminum alloy
Seals material NBR
Material of dynamic seals TPE-U(PU)
End plate material Wrought aluminum alloy, anodized
Guide rod material High-alloy steel
Housing material Wrought aluminum alloy, anodized
Piston rod material High-alloy steel

12/21/25 - Subject to change - Festo SE & Co. KG

2/2